Key data: 2000 kN, 240 g/PS, 45 mm
Arburg 520 C - Allrounder 2000-675 -Injection molding machine - Control: Selogica - Handlebar spacing: 520 x 520 mm - Handlebar extension: 100 mm - Tool installation height: 350 mm - Opening travel: 650 mm - Centering: 125 mm - Core pull: 2 - Screw diameter: 45 mm - Shot weight - HP : 240g - Clamping force: 2000 KN - Operating hours pump: 61908 - Automatic operating hours: 55566 - Working position: Standard
Key data: 1000 kN, 132 g/PS, 35 mm
Undergoing refurbishment at our headquarters in Northamptonshire is this Arburg 420C 1000-290 injection moulding machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of ...
Key data: 250 kN
Clamping force: 250 kN Panel size 342 x 250 mm Screw diameter 20 mm
Arburg Allrounder 270S 250-60 Clamping force: 25 t Year of manufacture: 1999 Shot weight: 17 g Injection Unit 60 Screw diameter: 18 mm Specific injection pressure: 2500 bar Injection volume: 20 ccm Shot weight: 17 g Screw L/D ratio: 24.5 Clamping System 250 Clamping force: 25 t Mold platen dimensions: 400 x 400 mm Clearance between tie bars: 270 x 270 mm Mold height: 200 mm Opening stroke: 275 mm Maximum platen distance: 475 mm Electrical connection (fuse protection): 120 l Weight: 1900 kg Control system: Selogica Equipment: -Sorting flap -Euromap 12 interface -Picker
Key data: 400 kN, 77 g/PS, 30 mm
Used to manufacture very sophisticated ABS products, is continuously serviced by Arburg Service, machine in top condition. Wear parts replaced regularly, technically and aesthetically demanding machine. Equipped with many extras, she worked in a production cell. Can also be viewed during production. Please see our other advertisements.
Key data: 1300 kN, 127 g/PS, 35 mm
Year of manufacture: 9/2003 Screw ⌀ 35 mm Shot weight: 127 g Injection pressure 2500 bar Shot volume 139 cm³ Clamping force 130 tons. / 1300 kN Tie bar distance: 420 x420 mm Clamping plates: 605 x 605 mm Tool installation height: 250 mm max spacing slabs 750 mm
Manufacturer: Arburg Type: 320 S 500 - 150 Year of production: 2000 Controls: Selogica Closure Type: Hydraulic Clamping force: 500 kN Bar spacing: 320 mm x 320 mm Plate Size: 498mm x 498mm Tool height: min 225 mm Opening Distance: 350mm Maximum distance between plates: 575 mm Screw: 35mm Stroke volume: 106 ccm / 89 gram PS Injection pressure: 1610 bar General Motor: 15kw Heating: 4.8 kW Dimensions: 3.7 m x 1.2 m x 1.8 m weight: 2250 kg On-screen text: German Additional equipment: Core String: x1 Euromap
Key data: 1300 mm, 117 , 35
Producent: Arburg Typ: 470 S 1300 - 350 Rok produkcji: 1999 Sterowanie: Selogica Typ zamknięcia: Hydrauliczny Siła zamykania: 1300 kN Rozstaw prętów: 470 mm x 470 mm Rozmiar płyty: 650 mm x 650 mm Wysokość narzędzia: min 275 mm Odległość otwarcia: 575 mm Maksymalna odległość między płytami: 850 mm Śruba: 35 mm Objętość skoku: 139 ccm / 117 gram PS Ciśnienie wtrysku: 2500 bar Ogólne Silnik: 22 kW Ogrzewanie: 8,8 kW Wymiary: 4,5 m x 1,6 m x 2 waga: 5100 kg Tekst na ekranie: niemiecki Dodatkowe wyposażenie/wyposażenie Rdzeń ciągnący: x1 Euromap Gorące strefy
Key data: 700 kN, 132 g/PS, 35 mm
Injection moulding machine Arburg 370S-700-290 Item number: 232 Availability: In stock Year of Make: 2008 Brand: Arburg Specifications Injection weight: 132 g Clamping force: 700 kN Screw diameter: 35 mm Spray pressure: 2000 bar Tiebar spacing: 370x370 mm Clamping plate size: 510x510 mm Tool installation height min.: 200 mm Plate spacing max: 600 mm Control: Selogica Language: German Power: 23.9 kW Hours: 67848 h Weight: 3300 kg Dimensions: 3.8x1.5 m Funnel: No Euromap: Yes Air Valve: Yes
Arburg Allrounder 320S 500-60 Closing force: 50t Year of production: 09/2005 Injection weight: 27g Injection unit .../60 Screw diameter: 22 mm Specific injection pressure: 2340 bar Injection volume: 30 ccm Injection weight: 27 g L/D ratio of snail: 20 Tool clamping system 500/... Closing force: 50 t Tool plate dimensions: 446 x 446 mm Clearance between columns: 320 x 320 mm Tool height: 225 mm Opening Path: 350mm Maximum Distance of Plates :575 mm Weight: 2150 kg
Key data: 2500 kN, 510 g/PS, 55 mm
Injection moulding machine Arburg 630S-2500-1300 (231) Item number: 231 Availability: In stock Year of Make: 2007 Brand: Arburg Specifications Injection weight: 510 g Clamping force: 2,500 kN Screw diameter: 55 mm Spray pressure: 2380 bar Tiebar spacing: 630x630 mm Clamping plate size: 900x900 mm Tool installation height min.: 400 mm Plate spacing max: 1000-1300 mm Control: Selogica Language: German Power: 68 kW Operating hours: 74,294 h Weight: 13500 kg Funnel: No Core Pull: Yes Euromap: Yes Air Valve: Yes
Key data: 5000 mm, 984 , 70
Screw diameter: 70 mm Stroke volume: 1,078 cm³ Injection weight in polystyrene: 984 g/hp Injection pressure: 2,000 bar Clamping force: 500 t Lights Tiebar spacing H x V: 920 x 920 mm Tool installation height min./max: 400/1050 mm Opening distance: 900 mm CONTROL: Selogica Screen text: german / english Operating instructions: german / german FHK interface for robots: EM67 Core pull: 2 Pump drive power: 75 kW Installed heating capacity: 33.9 kW Total weight: 25,000 kg Dimensions L x W x H: 9.1 x 2.2 x 2.5 m Payment terms: 100 % before taking over the machine, net only
Key data: 1000 kN, 127 g/PS, 35 mm
Regularly serviced machine that is always kept in top shape. The screw rotation is carried out with an electric servo motor, which is an energy-efficient solution. The rest of the machine is identical to the standard version of the 420 S. The presence of the core puller in this type is extra. Another special feature is that the injection molding unit can be moved from the center. Software and technologies can be read from a CF disk. The notification can be made in both Hungarian and German. Manuals can also be in German or Hungarian. Currently, the machine has a 35 mm auger for technical materials in good condition. A video of the operation of the machine was also created, which can also be tried out in person at our site. Please see our other ads. Information about the machines we offer and our company: - We only sell machines that are owned by us and can be purchased in our warehouse ...
Arburg Allrounder 320KS 700-100 Clamping force: 70t Year of construction: 2002 Injection unit .../100 Screw diameter: 35 mm Clamping unit 700/... Clamping force: 70 t Plate size: 476 x 476 mm Distance between tie bars: 320 x 320 mm Ejection force: 30 kN Mould height: 200...400 mm Opening stroke: 250 mm Max. plate spacing 650 mm Ejector stroke: 70 mm Weight: 2100 kg Control: Selogica
B&A REF: 9093 TON: 25 SCREW DIAMETER: 25MM SHOT WEIGHT: 45 STROKE VOLUME: 49CM3 INJECTION PRESSURE: 2000AR PLATEN SIZES: 404 X 324MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 250MM MOULD OPENING STROKE: 225MM MAX DAYLIGHT: 375MM EJECTOR STROKE: 30MM CONTROLS: SELOGICA MOTOR: 7.5 HEATING CAPACITY: 4.2KW SCREW DRIVE: HYDRAULIC
Key data: 50 kN, 105 g/PS, 35 mm
Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 320C 500-170, Golden Edition, injection moulding machine. Fitted with a 35mm plasticising unit and the Selogica controller. It is one of the most popular machines on the used market and Arburg have done exceptionally well with the combination over the years. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarante ...
Key data: 1300 kN, 35 mm
ARBURG Allrounder 520 A 1300-400 Stock No.: 503531 Manufacturer: ARBURG Type: Allrounder 520 A 1300-400 Control: Selogica direct Year of Make: 2014 Operating hours: 55000 h Technical data closing page Clamping force: 1300 kN Wooden dimensions h x v: 520 x 520 mm Panel size h x v: 695 x 695 mm Min. installation height: 250 mm Max. installation height: 550 mm Plate spacing max.: 950 mm Opening travel: 450 mm Ejector stroke: 175 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 1400 kg Technical Data Spray Side Screw diameter: 35 mm Displacement: 154 cc Spray pressure: 2500 bar Screw length: 23 l/d Screw stroke: 160 mm Worm torque: 480 N Outdoor injection flow: 192 g/s hp Number of heating zones: 5 Nozzle travel: 400 mm Dimensions & Weight Machine dimensions LxWxH: 5.45m x 1.9m x 2.1m Total W ...
Key data: 400 kN, 25 mm
ARBURG Allrounder 1200 TS 400-150 Stock No.: 503460 Manufacturer: ARBURG Type: Allrounder 1200 TS 400-150 Control: Year of Make: 1998 Technical data closing page Clamping force: 400 kN Min. installation height: 250 mm Plate spacing max.: 550 mm Opening travel: 300 mm Size rotary table D: 1200 mm Ejector stroke: 150 mm Ejector force: 46 kN Centering of movable plate D: 90 mm Centering of fixed plate D: 125 mm Technical Data Spray Side Screw diameter: 25 mm Displacement: 54 cc Spray pressure: 2500 bar Screw length: 24 l/d Screw stroke: 110 mm Screw speed: 52 min Worm torque: 300 N Outdoor injection flow: 80 g/s hp Number of heating zones: 4 Nozzle travel: 300 mm Dimensions & Weight Machine dimensions LxWxH: 4.1m x 1.75m x 2.6m Total Weight: 8000KG Equipment Screen text German CEE socket 16A Turntable Levelling elements Schuko socket 10A
B&A REF: 9061 TON: 200 SHOT WEIGHT: 434 SCREW DIAMETER: 55MM STROKE VOLUME: 474CM3 INJECTION PRESSURE: 1650AR PLATEN SIZES: 795 X 795MM DBTB: 570 X 570MM MIN MOULD HEIGHT: 250MM MAX MOULD HEIGHT: 550MM MOULD OPENING STROKE: 450MM MAX DAYLIGHT: 1000MM EJECTOR STROKE: 200MM CONTROLS: SELOGICA AIR VALVES: 1 MOTOR: 37 HEATING CAPACITY: 19.8KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: ELECTRIC
B&A REF: 8759 TON: 200 SHOT WEIGHT: 297 SCREW DIAMETER: 50MM STROKE VOLUME: 353CM3 INJECTION PRESSURE: 2050AR PLATEN SIZES: 795 X 795MM DBTB: 570 X 570MM MIN MOULD HEIGHT: 300MM MOULD OPENING STROKE: 650MM MAX DAYLIGHT: 950MM EJECTOR STROKE: 225MM CONTROLS: SELOGICA AIR VALVES: 1 MOTOR: 30 HEATING CAPACITY: 12KW SCREW DRIVE: ELECTRIC
Key data: 600 kN, 158 g/PS, 40 mm
Injection pressure 1900 bar. Length of the clamping plate: 570 mm. Width: 570 mm. Dimension between the bars: 370 x 370 mm. Opening stroke 500 mm. With robot
Key data: 300 kN, 28 g/PS, 20 mm
Arburg 270 C300-100 Year of manufacture 2007 Clamping force: 30 tons. Screw diameter: 20 mm Spraying weight: 28 gr. Max. spray pressure: 2500 bar incl. integrated Arburg Multilift 2 Core moves
Spare parts for Arburg injection moulding machines, The parts are 100% original and functional, and above all, much cheaper than new parts • Control units •Screens • Pressure transducer • Smart cards •Modules •Power supplies •Switches •Keyboard • Temperature controllers • Amplifier Cards •Transducers • Pressure switches • Hydraulic motors • Hydraulic pumps •Manometers • Oil coolers • Proportional valves • Safety valves • Directional valves • Water faucets
Ersatzteile für Spritzgießmaschinen Arburg Die Teile sind 100 % original und funktionsfähig und vor allem deutlich günstiger als Neuteile Arburg Ersatzteile Hydraulikteile Ventile , Proportionalventile Ventile Arburg No. WE06DA12B0240-G0 Arburg SN. 141288 No. 3WE6B4-60/EG24NK4 Arburg SN. 141288 No. 3WE6B4-61/EG24N9K4 Arburg SN. 141289 No. 3WE6B73-61/EG24N9K4 Arburg SN. 50447 No. 3WE6B4-53/BG24NK4 Arburg SN. 75680 No. 3WE6B53/BG24NK4 Arburg SN. 84835 No. 3WE6B73-52/BG24NK4 Arburg SN. 84835 No. 3WE6B73-53/BG24NK4 Arburg SN. 85536 Nr. 5-3WE10B31/CG24N9K4 Arburg SN. 85536 No. 5-3WE10B32/CG24N9K4 Arburg SN. 104516 No. 5-4WE10EB32/CG24N9K4 Arburg SN. 141286 No. 4WE6E67A60/EG24N9K4 Arburg SN. 141287 No. 4WE6D61/EG24N9K4/AR Arburg SN. 160572 No. WE10DA01B0240-G0 Arburg SN. 163786 No. WE06DA08A0240-G0 Arburg SN. 163787 No. WE10DA08A0240-G0 Arburg SN. 41016 No. ...
Key data: 800 kN, 131 g/PS, 40 mm
Arburg 370M-1000-250 (223) Description General information Item number: 223 Availability: In stock Year of Make: 1994 Brand: Arburg Specifications Injection weight: 131 g Clamping force: 800 kN Screw diameter: 40 mm Spray pressure: 1750 bar Tiebar spacing: 370 x 370 mm Clamping plate size: 530 x 530 mm Tool installation height min.: 250 mm Language: Polish Power: 24 kW Hours: 81323 h Weight: 3080 kg Dimensions: 4.2 x 1.2 m Funnel: No Euromap: Yes
Key data: 800 kN, 131 g/PS, 40 mm
Description General information Item number: 222 Availability: In stock Year of Make: 1993 Brand: Arburg Specifications Injection weight: 131 g Clamping force: 800 kN Screw diameter: 40 mm Spray pressure: 1750 bar Tiebar spacing: 370 x 370 mm Clamping plate size: 530 x 530 mm Tool installation height min.: 250 mm Language: Polish Power: 24 kW Hours: 97972 h Weight: 3080 kg Dimensions: 4.2 x 1.2 m Funnel: No Euromap: Yes
Good morning We offer a wide range of high-quality injection molding machines that are ideal for a variety of applications in plastics processing. All our machines are in excellent working order and are ready for immediate use. Arburg 570C 2200-1300 for sale Year of production: 2005 1. Capping unit: Clamping force: 2200 kN Dimensions of the fixing plates (H x W): 795 x 795 mm Column clearance (H x W): 570 x 570 mm 2. Injection Unit: Screw diameter: 60 mm Injection volume: 664 cm³ Injection weight: 558 g Injection pressure: 2000 bar 3. Dimensions and weight: Net weight with control cabinet: 9.3 t Dimensions (L x W x H): 6.16 x 1.91 x 2.39 m Why choose our machines? - Full technical efficiency: Each machine is thoroughly checked and serviced by our experienced mechanics. - Competitive prices: We offer attractive financial conditions for the purchase of our m ...
