Key data: 350 kN
Arburg 270U 350-100U / universal machine / operating hours: 21,158 h in automatic mode Year of construction: 07.2008 Injection unit: Screw diameter: 20 mm Spray weight: 29 g Injection pressure: 2500 bar Dosing volume: 31 ccm Clamping unit : Clamping force: 35 t Tie bar spacing: 270x270 mm Size of clamping plates: 380x380 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Universal machine, hybrid: high-speed, energy-saving and very quiet Operating hours: 21,158 h in automatic mode Euromap 12 Robot Interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter - energy saving Injection unit and clamping unit can work horizontally or vertically Machine is equipped with an additional remote control to control the machine Metrics: ...
Key data: 350 kN
Arburg OK-C S350-60 / Vertical injection moulding machine with sliding table / Very good technical condition Year of construction: 2008 Injection unit: Screw diameter: 18 mm Injection weight: 18 g Injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit: Clamping force: 35 t Tie bar spacing: 0x0 mm Size of clamping plates: 295x395 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Vertical Injection Molding Machine with Sliding Table 3 stations on the sliding table Air Valve x 4 Hydraulic core pull x 1 Control with hot runners Injection unit hardened - Bimetal Parallel Movements Infrared Protective Curtains It is possible to change the screw diameter Metrics: Weight: 2500 kg Length/Width/Height: 2.55x1.85x3.52 m All offered machines are started by our service technicians before they are sold. ...
Key data: 300 kN
Arburg 270C 300-100 with the Wittmann W621 robot Year of construction: 2005 Injection unit: Screw diameter: 25 mm Injection weight: 41 g Spray pressure: 2240 bar Dosing volume: 49 ccm Clamping unit : Clamping force: 30 t Tie bar spacing: 270x270 mm Size of clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Euromap 12 Robot Interface Air valve x 2 Hydraulic core pull x 2 Control with hot runners Injection unit hardened - Bimetal Robot Wittmann W621 Year of construction: 2004 5-axis robots: 3 axes are driven by servo motors (electric); Axis B (rotation) and C Travels in axes: X-550, Y-1000, Z-1500 Touch control panel Robot with adapter Purchase of the robot at an additional cost Metrics: Weight: 2250 kg Length/Width/Height: 3.42x1.48x1.99 m Drive: Pumps/motor: 7.5 kW Hea ...
Key data: 350 kN
Arburg 221M 350-75 Year of construction: 1996 Injection unit: Screw diameter: 25 mm Injection weight: 41 g Injection pressure: 1570 bar Dosing volume: 49 ccm Clamping unit: Clamping force: 35 t Tie bar spacing: 221 mm Size of clamping plates: 342x250 mm Ejector: hydraulic Control: MULTRONICA Additional equipment: Metrics: Weight: 1300 kg Length/width/height: 0x0x0 m Drive: Pumps/motor: 7.5 kW Heating capacity: 4 kW Total power: 11.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Key data: 250 kN
Arburg 221KS 250-75 / Universal machine Year of construction: 1999 Injection unit: Screw diameter: 20 mm Injection weight: 26 g Spray pressure: 2350 bar Dosing volume: 31 ccm Clamping unit : Clamping force: 25 t Tie bar spacing: 221 mm Size of clamping plates: 342x250 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Universal machine - injection unit can run both vertically and horizontally Control with air valve Core Pull Control Injection unit hardened - Bimetal Tension clamp for attaching the injection unit vertically Metrics: Weight: 1150 kg Length/Width/Height: 2.63x1.34x1.93 m Drive: Pumps/motor: 5.5 kW Heating capacity: 4.6 kW Total power: 10.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected ...
Key data: 250 kN
Arburg 270S 250-60 U / Universal machine Year of construction: 2001 Injection unit: Screw diameter: 18 mm Injection weight: 17 g Injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit: Clamping force: 25 t Tie bar spacing: 270x270 mm Size of clamping plates: 400x400 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Universal machine, injection unit and clamping unit can work horizontally or vertically Air valve x 2 Core Pull Control Control with hot runners Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Metrics: Weight: 2100 kg Length/Width/Height: 2.89x1.11x1.85 m Drive: Pumps/motor: 7.5 kW Heating capacity: 2.7 kW Total power: 10.2 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video ...
Key data: 250 kN
Arburg 221KS 250-75 / Universal machine Year of construction: 1999 Injection unit: Screw diameter: 20 mm Injection weight: 26 g Spray pressure: 2350 bar Dosing volume: 31 ccm Clamping unit: Clamping force: 25 t Tie bar spacing: 221 mm Size of clamping plates: 342x250 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Universal machine - injection unit can run both vertically and horizontally Control with air valve Core Pull Control Injection unit hardened - Bimetal Tension clamp for attaching the injection unit vertically Metrics: Weight: 1150 kg Length/Width/Height: 2.63x1.34x1.93 m Drive: Pumps/motor: 5.5 kW Heating capacity: 4.6 kW Total power: 10.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected ma ...
Key data: 250 kN, 22 mm
Article number: 27-06-304 Manufacturer: Arburg Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1985 L x W x H: approx. 2700x1200x1800mm Weight: approx. 930kg Closing side: Clamping force: approx. 250kN Holm dimension hxv: ca.221x0mm Plate size hxv: approx. 342x250mm Installation height min: ca.150mm Installation height max: approx. 300mm Plate spacing max: approx. 500mm Aperture travel: approx. 200mm Spray side: Screw diameter: approx. 22mm Displacement: approx. 38cc Injection pressure: approx. 1500bar Other accessories on request Price and other technical data on request
Key data: 500 kN
Injection moulding machine Arburg 270 D 500-210 with control cabinet, functional, built in 1990, power 20kW, weight 1,850 kg, Clamping force 500 kn
Key data: 130000 kN, 194 g/PS, 45 mm
Clamping force: 130 t Year of construction: 1999 Injection weight in hp: 194 (hp) g Control type: Selogica Injection unit: .../350 Screw diameter: 45 mm Spec. Injection pressure: 1670 bar Spraying volume: 230 ccm Injection weight in hp: 194 (hp) g Hydr. Drive power: 22 kW L/D Screw Ratio: 18 Clamping unit: 1300/... Clamping force:: 130 t Size of clamping plates: 615 x 615 mm Lights spar spacing: 420 x 420 mm Ejector force: 40 kN Tool installation height: 250 mm Aperture travel: 500 mm Max. plate spacing: 750 mm Ejector travel: 175 mm General information: Fuel tank capacity OIL: 240 l Weight: 4100 kg Dimensions(m) LxWxH: 4.4 x 1.4 x 2.1 m
Key data: 60000 kN, 18 g/PS, 15 mm
Clamping force: 60 t Year of construction: 2000 Injection weight in PS: 18 g Control type: Selogica Injection unit: .../150 Screw diameter: 15 mm Spec. Injection pressure: 2500 bar Spraying volume: 20 ccm Injection weight in PS: 18 g Clamping unit: 600/... Clamping force:: 60 t Size of clamping plates: 570 x 570 mm Lights spar spacing: 370 x 370 mm Tool installation height: 200 mm Aperture travel: 450 mm Max. plate spacing: 650 mm Ejector travel: 150 mm General information: Fuel tank capacity OIL: 150 l Weight: 3600 kg Dimensions(m) LxWxH: 4.0 x 1.2 x 2.1 m
Key data: 200000 kN, 117 g/PS, 35 mm
Clamping force: 200 t Year of construction: 2001 Injection weight in PS: 117 g Control type: Selogica Injection unit: .../350 Screw diameter: 35/35 mm Spec. Spraying pressure: 2500/2500 bar Spraying volume: 127 ccm Injection weight in PS: 117 g Clamping unit: 200/... Clamping force: 200 t Lights spar spacing: 570 mm Aperture travel: 175 mm Max. plate spacing: 950 mm Ejector travel: 225 mm Other equipment: 2 x Core Pulls
Key data: 200000 kN, 72 g/PS, 30 mm
Clamping force: 200 t Year of construction: 2006 Injection weight in PS: 72 / 45 g Injection unit: .../150 / 150 Screw diameter: 30 / 25 mm Spec. Spray pressure: 2000 / 2500 bar Spray volume: 77 / 54 ccm Injection weight in PS: 72 / 45 g Clamping unit: 200/... Clamping force: 200 t Size of clamping plates: 795 x 795 mm Lights spar spacing: 570 x 570 mm Tool installation height: 300 mm Aperture travel: 650 mm Max. plate spacing: 950 mm Ejector travel: 225 mm General information: Delivery Time: Natychmiast Dimensions(m) LxWxH: 5.50 x 2.08 x 2.45 m Equipment: 3 x Hydraulic Core Pull 4 x Air Valve 2 x Thermoregulators Snail: upper/vertical 30 mm Bottom/Horizontal 25mm
Key data: 160 kN, 291 g/PS, 45 mm
Clamping force: 160 t Year of construction: 2006 Injection weight in PS: 291 g Control type: Selogica Injection unit: .../800 Screw diameter: 45 mm Spec. Spray pressure: 2470 bar Spray volume: 317 ccm Injection weight in PS: 291 g Clamping unit: 160/... Clamping force:: 160 t Lights spar spacing: 520 mm Aperture travel: 175 mm Max. plate spacing: 900 mm General information: Weight: 7000 kg Dimensions(m) LxWxH: 5.5 x 1.8 x 2.1 m Other equipment: 2 x Core Pulls
B&A REF: 9006 TON: 500 SHOT WEIGHT: 993 SCREW DIAMETER: 70MM STROKE VOLUME: 70CM3 INJECTION PRESSURE: 2000AR PLATEN SIZES: 1280 X 1280MM DBTB:920 X 920 MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 950MM MOULD OPENING STROKE: 900MM MAX DAYLIGHT: 1850MM EJECTOR STROKE: 250MM CONTROLS: SELOGICA TOUCH CORE PULLING: 1 AIR VALVES: 1 MOTOR: EUROMAP HEATING CAPACITY: 37KW ROBOT INTERFACE: EUROMAP ACCUMULATED: 2
Screw diameter: 40 mm Injectable volume: 182 mm Injection pressure: 2120 mm Passage between columns: 420 x 420 mm Opening stroke: 500 mm Core: 1 Blower: Robot Interface
Screw diameter; 55-35 mm Injectable volume: 558 - 139 cm3 Injection pressure: 2380-2500 bar Column width: 630 x 630 mm Mould thickness min: 300 mm max: 600 mm Aperture stroke: 600 mm Cores: 2 Robot Interface: Yes Options: Rotating base: Arburg 243849 year: 2012
Inv. Num. : 7180 Type: ALLROUNDER 320 C 600 Producer: Arburg Created: 2008 Parameters: Distance between tie rods: 320x320 mm Clamping force: 500 kN Injection weight: 2300 kg
Used injection moulding machine made by Arburg model Allrounder 221-75-350, new 1984. Closing force: 350 kN/tonne. Injection force: 77 kN/tonne. Operating voltage: 380V, 50Hz. Heating: 3.4 kW. Pump motor: 7.5 kW. Total load: 10.9 kW.
Key data: 1500 kN, 141 g/PS, 35 mm
Arburg 520S-1500-400 (217) General information SKU: (217) Availability: In stock Year of construction: 2008 Brand: Arburg Specifications Spray weight: 141 g Clamping force: 1,500 kN Screw diameter: 35 mm Spray pressure: 2000 bar Tie bar spacing: 520 x 520 mm Clamping plate size: 688 x 688 mm Tool installation height min.: 250 mm Control: Selogica Language: English,German Power: 33.9 kW Hours: 45343 h Weight: 6490 kg Dimensions: 4.9 x 1.7 m Funnel: No Core Train: Yes Euromap: Yes Air Valve: Yes Heating cans: Yes C90fn8e
Key data: 400 kN, 17 g/PS, 18 mm
Arburg 270S-400-70 (220) General information SKU: (220) Availability: In stock CTFZQ29N Year of construction: 2008 Brand: Arburg Specifications Injection weight: 17 g Clamping force: 400 kN Stand: Used Screw diameter: 18 mm Injection pressure: 2500 bar Tie bar spacing: 270 x 270 mm Clamping plate size: 385 x 385 mm Tool installation height min.: 225 mm Control: Selogica Language: English,Swedish Power: 16.4 kW Weight: 2040 kg Dimensions: 1.3 x 3.1 m Funnel: No Core Train: Yes Euromap: Yes Air Valve: Yes Heating cans: Yes
Key data: 1000 kN, 127 g/PS, 35 mm
Regularly maintained machine that is always kept in top condition. The screw rotation is done with an electric servo motor, which is an energy-efficient solution. The rest of the machine is identical to the standard version of the 420 S. The presence of the core puller in this type is extra. Another special feature is that the injection molding unit can be moved from the center. Software and technologies can be read from a CF floppy disk. The display can be done in both Hungarian and German. Manuals can also be in German or Hungarian. Currently, the machine has a 35 auger for technical materials in good condition. A video of the operation of the machine has also been created, which can also be tried out in person at our site. Please see our other ads.
Key data: 500 mm, 30
This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 1999 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: 320 S 500-150/60 - Year of construction: 1999 - Clamping force: 500 kN - Screw diameter: 30 mm - Injection pressure: 2,200 Bar - Shot volume: 78 cm³ - Working hours: 37,400
Key data: 500 mm, 25
This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 1999 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: 320 S 500-60 - Year of construction: 1999 - Clamping force: 500 kN - Screw diameter: 25 mm - Injection pressure: 1,800 Bar - Shot volume: 39 cm³ - Working hours: 52,100
This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 2001 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: Thermolift 100-2 - Year of construction: 2001 - Clamping force: 1,000 kN - Screw diameter: 45 mm - Injection pressure: 1,670 Bar - Shot volume: 230 cm³ - Working hours: 58,700
Key data: 1500 kN, 487 g/PS
Arburg 520A-1500-800 (207) General information Item number: 207 Availability: In stock Year of construction: 2007 Brand: Arburg Specifications Spray weight: 487 g Clamping force: 1,500 kN Stand: Used Screw diameter: 60 mm Spray pressure: 1390 bar Tie bar spacing: 520 x 520 mm Clamping plate size: 700 x 700 mm Control: Selogica Power: 74 kW Operating hours: 63,600 h Weight: 7300 kg Dimensions: 6 m x 2.4 m Funnel: No
Key data: 1000 kN, 131 g/PS, 35 mm
Arburg 4220C-1000-290 (208) General information Product Code: 208 Availability: In Stock Year of production: 2008 Brand: Arburg Technical data Shot Weight: 131 g Clamping Force: 1,000 kN Condition: Used Screw dia: 35 mm Injection pressure: 2000 bar Tie bar distance: 420 x 420 mm Platen size: 570x 570 mm K8sbfm2u Mould height min.: 250 mm Type of controls: Selogica Language: German Power: 46 kW Working hours: 87.026 h Weight: 3740 kg Dimensions: 4.4 x 2 m Core pull: Yes Euromap: Yes
Key data: 700 kN, 121 g/PS, 35 mm
General information Item number: 210 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 121 g Clamping force: 700 kN Stand: Used Screw diameter: 35 mm Spray pressure: 1820 bar Tie bar spacing: 320 x 320 mm Clamping plate size: 476 x 476 mm Tool installation height min.: 200 mm Control: Selogica Language: German,Polish Power: 46 kW Operating hours: 104195 h Weight: 2270 kg Dimensions: 3.25 x 2 m Euromap: Yes
Key data: 700 kN, 121 g/PS, 35 mm
General information Item number: 209 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 121 g Clamping force: 700 kN Stand: Used Screw diameter: 35 mm Spray pressure: 1820 bar Tie bar spacing: 320 x 320 mm Clamping plate size: 476 x 476 mm Tool installation height min.: 200 mm Control: Selogica Language: German,Polish Power: 46 kW Hours: 94184 h Weight: 2270 kg Dimensions: 3.25 x 2 m Euromap: Yes
Key data: 400 kN, 21 g/PS, 18 mm
Arburg 270 U 400-70 Year of construction: 5/2006 Clamping force: 40 tons. Screw diameter: 18 mm Operating hours: 36000 h additionally 2 Regloplas temperature control units + dryer feeder Fasti
