Key data: 550 kN
Boy 55A Pro / Operating hours: 17,083 in automatic mode / Machine in very good technical condition Year of construction: 2017 Injection unit: Screw diameter: 38 mm Spray weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit: Clamping force: 55 t Tie bar spacing: 360x335 mm Size of clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Controls: Procan Alpha - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 17,083 in automatic mode Pneumatic core x 2 Injection unit hardened - Bimetal The machine was regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Metrics: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All off ...
Key data: 900 kN
Boy 90 M Year of construction: 2004 Injection unit: Screw diameter: 42 mm Spray weight: 193 g Injection pressure: 1724 bar Dosing volume: 214.7 ccm Clamping unit : Clamping force: 90 t Tie bar spacing: 430x360 mm Size of clamping plates: 635x610 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan - Touchscreen Additional equipment: Euromap 12 Robot Interface Air valve x 1 Metrics: Weight: 3100 kg Length/Width/Height: 4.37x1.21x2.20 m Drive: Pumps/motor: 15 kW Heating capacity: 11.3 kW Total power: 26.3 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Key data: 550 kN
Boy 55A Pro / Operating hours: 16,624 in automatic mode / Machine in very good technical condition Year of construction: 2017 Injection unit: Screw diameter: 38 mm Spray weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit : Clamping force: 55 t Tie bar spacing: 360x335 mm Size of clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Controls: Procan Alpha - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 16,624 in automatic mode Pneumatic core x 2 Injection unit hardened - Bimetal The machine was regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Metrics: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All of ...
Key data: 550 kN
Boy 55A Pro / Operating hours: 18,153 in automatic mode / Machine in very good technical condition Year of construction: 2016 Injection unit: Screw diameter: 38 mm Spray weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit: Clamping force: 55 t Tie bar spacing: 360x335 mm Size of clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Controls: Procan Alpha - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 18,153 in automatic mode Pneumatic core x 2 Injection unit hardened - Bimetal The machine was regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Metrics: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All off ...
Awaiting refurbishment by our team at STV Machinery in Wellingborough, Northamptonshire is this 2002, BOY 90M injection moulding machine. It comes fitted with the Procan MD controller and 36mm plasticising unit. BOY 90 machines are some of the smallest (footprint) machines around for their clamp size. The design of the clamp unit on these machines means easy access for tool mounting and clear space below the clamp unit for conveyors etc. Very popular machines on the used market and support are readily available from various sources across Europe as there are a lot of these machines in operation. Come down and have a look yourself. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free op ...
This Dr. Boy injection molding machine is in machine storage at Plastima Used Machinery. The machine is from 1996 and has relatively few working hours for its age. – Brand: Dr. Boy – Model: 80M – Year built: 1996 – Screw diameter: 42mm – Shot volume: 200 cm³ – Closing force: 80T – Working hours: 24,222
This injection molding machine from Dr. Boy is in good condition. The machine is from 2022 and has few working hours. – Brand: Dr. Boy – Model: XS – Year of construction: 2022 – Screw diameter: 18 mm – Shot volume: 15.3 cm³ – Closing force: 10 T – Working hours: < 25
Key data: 300 , 49 , 28
Now fully refurbished is this four tie-bar BOY 30 tonne clamp machine with Dipronic controller . The Dipronic controller fitted to this machine and other ‘D’ series has stood the test of time and is now even demanding a premium. The controller and setup of the machine is straightforward, easy to problem solve and great for learning. Without expensive computer controlled systems, the cost of any repairs are often very low and easily carried out. The machine offers excellent platen dimensions and tie-bar clearance for the footprint, these machines are some of the most popular in the market for their niche. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machi ...
Key data: 900 , 252 , 48
Our team are currently working on this 2008, BOY 90M injection moulding machine. It comes fitted with the Procan MD controller, 48mm plasticising unit with bi-metallic barrel and single core pull and two 16A sockets. It has only 35,000 recorded run hours. BOY 90 machines are some of the smallest (footprint) machines around for their clamp size. The design of the clamp unit on these machines means easy access for tool mounting and clear space below the clamp unit for conveyors etc. Very popular machines on the used market and support are readily available from various sources across Europe as there are a lot of these machines in operation. Come down and have a look yourself. Refurbished machines from STV Machinery undergo a comprehensive refurbishment procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault ...
Key data: 500 , 115 , 38
1 x Boy 50T2 Year of construction 1992 Clamping force: 50 to. Screw diameter: 38 mm only 15,028 operating hours! 1 x Boy 50M Year of construction 1991 Clamping force: 50 to. Screw diameter: 38 mm only 18,656 operating hours! Both machines are in good condition, and haven´t been in production very often!
BOY 90A (102) Description Without funnel General information Item number: 102 Availability: In stock Year of construction: 2006 Brand: Boy Specifications Injection weight: 193 g Clamping force: 900 kN Screw diameter: 42 mm Spray pressure: 1724 bar Tie bar distance: 430x360 mm Clamping plate size: 635x610 mm Tool installationheight min.: 250 mm Control: Procan CT Language: German Power: 26.3 kW Operating hours: 15070 h Weight: 3100 kg Dimensions: 4.9x1.2x2.1 m Funnel: No
Key data: 550 , 92 , 32
Manufacturer: Boy Type: 55 AVV Year of construction: 2012 Control: Procan ALPHA Clamping force: 550 kN Type of lock: Hydraulish Spar spacing: 360 mm x 335 mm Plate size: 565 mm x 540 mm Tool installation height: min 250 mm Opening distance: 300 mm Plate spacing max.: 550 mm Screw: 32 mm Stroke volume: 96.5 ccm / 92.3 gram HP Injection pressure: 2127 bar General Motor: 11 kW Heating: 7,7 kW Dimensions: 3 m x 1.2 m x 3.7 m Weight: 2700 kg Screen text: German / English / French Additional equipment Robot interface
Key data: 550 , 92 , 32
Manufacturer: Boy Type: 55 MVV Year of construction: 2008 Control: Procan MD Clamping force: 550 kN Type of lock: Hydraulish Spar spacing: 360 mm x 335 mm Plate size: 565 mm x 540 mm Tool installation height: min 250 mm Opening distance: 300 mm Plate spacing max.: 550 mm Screw: 32 mm Displacement: 96.5 cc Spray weight PS: 92.3 gram HP Spray pressure: 2127 bar General Motor: 11 kW Heating: 7,7 kW Dimensions: 3 m x 1.2 m x 3.7 m Weight: 2700 kg Screen text: German / English / French Additional equipment Robot interface
BOY 35ton Injection Moulding machine Model 35E Horizontal 415V, 50Hz Year 2012
Key data: 550 , 67 , 28
Type: 55 M Built: 2003 Control: Procan MD Closing type: Hydraulic Technical data Closing force: 550 kN Tie bar distance H x V: 360 mm x 335 mm Plate size: 565 mm x 540 mm Tool installation height: min 250 mm Opening distance max.: 400 mm Plate spacing max.: 650 mm Screw diameter: 28 mm Lifting volume / spray weight (PS): 73.9 cc / 67 gram hp Spray pressure: 2778 bar General data Engine: 11 kW Heating: 9.6 kW Operating hours: on request Dimensions L x W x H: 3.3 m 1.8 m x 1.3 m Weight: 2430 kg Accessories Screen text: German Manual: Yes Additional equipment: Core train: x2 Robot interface
Boy 90A (No. 101) Built: 2006 TECHNICAL DATA Screw diameter [mm]: 42 Spray weight [g]: 193 Spray pressure [bar]: 1724 Closing force [kN]: 900 Tie bar distance [mm]: 430x360 Clamping plate size [mm]: 635 x 610 Tool installation height min. [mm]: 250 Control Control: Procan CT Monitor: Yes Control cabinet: Yes Other Power [kW]: 26.3 Engine hours [h]: 16969 Dimensions [m]: 4.9 x 1.2 x 2.1 Bjqmbwo2fl Weight [kg]: 3100
Manufacturer: Boy Model: 50 E Year of Manufacture: 2024 Type of Machine : Injection Molding Machine Operating Hours: 8h Equipped with a 32mm screw and enhanced with key features including Euromap 67 compatibility, brush interface, blow-out functionality, and evacuation system for optimized performance. Find more here - / Contact us at -
Clamping force: 550kN, screw diameter: 38mm, stroke volume: 196cm³, injection pressure: 2000bar, platen dimensions: 565mm/540mm, tie bar distance: 360mm/335mm. Workpiece height min./max.: 250mm/650mm, opening stroke: 400mm, max. platen distance: 1050mm, ejector stroke: 80mm, max. mold weight: 600kg. Dimensions X/Y/Z: approx. 3300mm/1200mm/2100mm, weight: approx. 2300kg, operating hours: 29664h, control: Procan MD. Robot interface Euromap 12 included.
A small Boy injection molding machine is available. Clamping force: 220kN, tie bar dimensions X/Y: 254mm/254mm, max. platen distance: 400mm, min. installation height: 200mm, opening stroke: 200mm, ejector stroke: 80mm. Screw diameter: 24mm, injection volume: 36cm³, injection weight: 32g, injection pressure: 1455bar. Machine dimensions X/Y/Z: 1800mm/1000mm/2600mm, weight: approx. 750kg, control: Dipronic. On-site inspection is possible.
This hydraulic injection moulding machine was manufactured in 2006. The BOY 55A features a clamping force of 550 kN, a max. plate distance of 650 mm, and supports a max. tool weight of 800 kg. It offers a variety of screw diameters from 28 to 42 mm, enhancing its versatility for different injection pressures and volumes. Consider the opportunity to buy this BOY 55A hydraulic injection moulding machine. Contact us for more information about this machine.
Ref. no.: 18552 Hersteller: BOY Year of construction: 1997 Clamping unit Clamping force: 22 ton Opening stroke: 200 mm Distance between tie bars: 254 mm Mould height min.: 200 mm Mould height max.: 400 mm Platen size (h x v): 425 x 400 mm Injection unit Screw diameter: 28 mm Injection volume: 49 cm³ Shot weight: 44 g Injection pressure: 1069 bar Measurements and weight Dimensions: 2.3 x 0.81 x 1.63 m Machine weight: 760 kg
Clamping force: 55 t Distance between tie bars V: 335 mm Distance between tie bars H: 360 mm Type: Horizontal Drive: Hydraulic
