Electric hoist, crane, electric wire rope hoist, winch DEMAG type P 10Fabr. No. 941 477 Year of construction 1962Lifting capacity 2000 kg at 4 stringLifting height 5 metersLifting speed 6 m/min. Fine stroke speed 1.3 m/min. Reeving 4/1Motor power 0.6 / 2.6 kWNet connection 380 volts, 50 Hz- DEMAG hoist, type 19/11 K28P- DEMAG electric chassis, type 13 / 6 K8- 1 travel speed approx. 19 m/min- Chassis for double T-beams, beam width 120 to 180 mm- Load hook for 4 load trains- Control bottle for the hoist
E-chain hoist, electric hoist, crane DEMAG type DKUN5-500-K-V1F4Fabr. No.: 61077868 Year of construction: 1999Load capacity 1000 kgHook travel 6.5 metersMain lifting speed 10 m/min. Fine lifting speed 1.6 m/min.2 load trains = 1000 kgPower supply 400 volts, 50 Hz.- Electric chassis DEMAG, type EU/RU 22 DK, 13/6 PF 12/4- Chassis for double T-beams, beam width 120 to 280 mm- 2 travel speeds 4.6 m/min and 14 m/min- Cable length of the control bottle 4.5 metersWeight 130 kggood condition; used
Model: EL-EXIS S 100/420-310 DEMAG ERGOTECH- EL-EXIS E 1000/420-310 (130) Year of production: 2005 Controll: NC4 TECHNICAL DATA Screw Dia [mm]: 35 Shot Weight [g]: 150 Injection Pressure [bar]: 1865 Clamping Force [kN]: 1000 Tie Bar Distance [mm]: 420 x 420 Platen Size [mm]: 600 x 600 Mould Height min. [mm]: 200 Machine tested
Manufacturer: Demag, Year: 1999, Hight of column mm: 8000, Traglast kg: 500, Year :1999
Manufacturer: Demag, Year: 1999, Hight of column mm: 8000, Traglast kg: 500, Year :1999
arm length: 2-3 m total column height: 4,3 m weight max. in kg: 80 kg travel of hook: 4,3 m NEWNever usedOVP Pillar jib crane - lifting capacity 80 kg with electric chain hoist, crane DEMAG type DCM-Pro 2 80 1/1 HV.3 V16/4 Year of manufacture 06/2024 - Hook path max. 4.3 m Chain size 4.2 x 12.2 RDC/TDK Mains connection 380 - 415 v Uc: 24 v The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Clamping force: 50 t Distance between tie bars: 320 x 320 mm Platten dimensions: 540 x 530 mm Screw diameter: 30 mm Injection pressure: 1995 Injection volume: 106 cm3 Shot weight: 94 g Type: Horizontal Drive: Hydraulic
Clamping force: 60 t Screw diameter: 30 mm Shot weight: 96 g Distance between tie bars V: 520 mm Distance between tie bars H: 520 mm Shot volume: 106 cm3 1 x core puller Type: Horizontal Drive: Hydraulic
Lifting capacity: 10000 kg Hoist height: 12000 mm Span length: 23600 mm Type: Overheadcrane MACH-id 3133 MAKE Demag TYPE ZLK YEAR 2010 SPECIFICATIONS Span 23.600 mm Height of lift 12.000 mm SWL / Kg 10.000 kg demag overhead crane
Radiators, heat exchangers, oil coolers MANNESMANN DEMAG 571 371 connections: Ø 24 / 40 mm radiator net: 740 x 110 x 600 mm radiator made of aluminium ! used, tested ! Dimensions: 910 x 210 x 600 mm
Radiators, heat exchangers, oil coolers MANNESMANN DEMAG 571 372 connections: Ø 60 mm flanges: Ø 165 mm, 100 x 100 mm radiator net: 380 x 110 x 410 mm radiator made of aluminium ! used, tested ! Dimensions: 610 x 215 x 500 mm
Double switching element, 1-stage DEMAG CBD1 87466744 500 V 20 A New ! Dimensions: 65 x 65 x 65 mm
Switching element, 1-stage DEMAG SESN 87419844 500 V 25 A New ! Dimensions: 65 x 45 x 58 mm
Crane motor, spare motor, electric motor DEMAG KBA 80 A 4 R ( KBA80A4R ) 0.25 kW 1380 rpm 220 / 380 V shaft:Ø 18 mm flange: 125 x 125 mm used, tested ! Dimensions: 350 x 260 x 220 mm
Crane motor, spare motor, DC motor DEMAG GDH 140 D2/1115 ( GDH140D2/1115 ) 2668009 9,9,000 5 kW 3135 rpm 400 V DC Excitation: 170 V DC Shaft diameter: Ø 32 mm Wavelength: 35 mm Groove width: 10 mm Flange diameter: Ø 280 / 318 x 318 mm bolt circle diameter: Ø 355 mm hole diameter: Ø 17.5 mm IP55 used, tested ! Dimensions: 780 x 320 x 375 mm
Crane motor, spare motor, DC motor with brake DEMAG GDH 140 D2/1110 ( GDH140D2/1110 ) 13 kW 2840 rpm -390 V DC Excitation: 170 V DC Shaft diameter: Ø 32 mm Wavelength: 35 mm Groove width: 10 mm Flange diameter: Ø 280 / 318 x 318 mm Bolt circle diameter: Ø 355 mm hole diameter: Ø 17.5 mm IP55 used, tested ! Dimensions: 765 x 320 x 375 mm
Crane motor, spare motor, DC motor DEMAG GDH 140 D2/1115 ( GDH140D2/1115 ) 9.5 kW 3135 rpm 400 V with encoder used, tested ! Dimensions: 950 x 380 x 320 mm
Column crane DEMAG SSK - KBK I/I-V ( SSK-KBKI/I-V ) Bj: 2000 Lifting capacity: 80 kg Span width: 2400 mm Hook height: 2600 mm < br /> trolley DC-PRO 1 - 80 H5 V1 Year: 2005 Lifting speed: 4 / 7 m/min 380 V (motor housing slightly cracked) used, ! Dimensions: 3550 x 2600 x 900 mm Weight: approx. 370 kg
weight max.: 250 kg throat: 2.500 mm weight of the machine ca.: t height: 3000 mm Column-mounted slewing jib crane from DEMAG Load capacity 250kg Outreach: 2,500 mm Floor operation Console fixing plate 600 x 600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1993 Demag Ergotech NC4 120-440 system As shown The machine is in good condition. Currently under power and can be viewed in production at a short notice. Year of construction: 1993 Closing force: 1200kN Closing force: 1320kN Spacing of the columns: 450x450mm Clamping platen: 660x660mm Mould installation height min.: 230mm Mould installation height max.: 460mm Opening stroke max.: 450mm Ejector travel: 140mm Ejector force: 58kN Ejector retraction force: 26kN Screw diameter: 40mm L/D ratio: 20 Max. Shot volume: 231ccm Injection pressure: 1855 bar Miscellaneous: Euromap 12 interface, 2 core pulls controllable, 2 air valves, integrated heating channel control (but control for this is defective, spare part enclosed) Find more here - / Contact us at -
1996 Demag Ergotech NC4 100-310 compact As shown The machine is in good condition. Currently under power and can be viewed in production at a short notice. Year of construction: 1996 Closing force: 1000kN Clamping force: 1000kN Distance of the columns: 400x400mm Clamping platen: 580x590mm Mould installation height min.: 250mm Distance between platens max.: 750mm Opening stroke max.: 500mm Ejector travel: 150mm Ejector force: 41kN Ejector retraction force: 15kN Screw diameter: 35mm L/D ratio: 20 Max. Shot volume: 168ccm Injection pressure: 2020 bar Other: Euromap 12 interface, 4-axis handling from Dürrschmidt, RSP exchanged 10/2023, SD card drive Find more here - / Contact us at -
1998 Demag Ergotech NC4 330-2300 compact As shown The machine is in good condition. Currently under power and can be viewed in production at a short notice. Year of construction: 1998 Closing force: 3300kN Closing force: 3630kN Spacing of the columns: 710x630mm Clamping platen: 1040x950mm Mould installation height min.: 330mm Mould installation height max.: 330mm Opening stroke max.: 675mm Ejector stroke: 200mm Ejector force: 80kN Ejector retraction force: 35kN Screw diameter: 80mm L/D ratio: 20 Max. Shot volume: 1583ccm Injection pressure: 1437 bar Other: 2014 general overhaul (new cylinder, screw, RSP, Smartdrive retrofitted, for pump speed control, heating band insulation, Euromap 12 interface), 2 core pulls controllable, SD card drive, running time since purchase 2015 only approx. 1500 hours! Machine is still in operation and runs perfectly Find more here - / Co ...
Ref. no.: 18142 Hersteller: DEMAG Year of construction: 1997 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Distance between tie bars: 355 x 355 mm Mould height min.: 210 mm Platen size (h x v): 540 x 540 mm Injection unit Screw diameter: 35 mm Injection volume: 106 cm³ Shot weight: 95 g Injection pressure: 2573 bar Measurements and weight Dimensions: 3,65 x 1,15 x 1,18 m Machine weight: 3600-2500 kg
weight max.: 500 kg throat: 4.000 mm base plate: 0,7 x 0,7 m dimensions of the machine ca.: 4,1 x 0,7 x 5,1 m Crane DEMAG - DC-COM 1/1 H5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lifting capacity: 5 kg Hoist height: 1 mm Span length: 1 mm Type: 1 Overhead travelling craneDEMAG - ZDD 29.700 x 2 x 5 Ton MACH-ID 8877 Make: DEMAG Type: ZDD 29.700 x 2 x 5 Ton
Lifting capacity: 25 kg Hoist height: 1 mm Span length: 1 mm Type: 1 Overhead travelling craneDEMAG - COILMASTER MACH-ID 8873 Make: DEMAG Type: COILMASTER Year: 2008
Lifting capacity: 12500 kg Hoist height: 8900 mm Span length: 18400 mm Type: Crane class H2 B3 Overhead travelling craneDEMAG - FDR-PRO 10-12.5 4/1 Double hoist Hoist 1: 12.500 Kg Hoist 2L 12.500 Kg Remote control Weight scale Crane class H2 B3 Span: 18400mm Lift height: 8900mm Capacity Kg: 12.5 Lifting speed:0.7 - 4.0 M/Min Hoist trolley:5 - 20 M/Min Crane driving:10 - 40 M/Min Weightscale: Yes Remote control:Yes Length: 2000mm Width: 4760mm Height: 2100mm Weight: 15300kg
Ref. no.: 18333 Hersteller: DEMAG Year of construction: 1998 Clamping unit Clamping force: 330 ton Opening stroke: 675 mm Distance between tie bars: 710 x 630 mm Mould height min.: 330 mm Mould height max.: 710 mm Platen size (h x v): 1040 X 950 mm Injection unit Screw diameter: 50 mm Injection volume: 530 cm³ Shot weight: 480 g Injection pressure: 2426 bar Measurements and weight Dimensions: 6,5 X 2,0 X 2,3 m Machine weight: 14500 kg
Ref. no.: 18333 Hersteller: DEMAG Year of construction: 1998 Clamping unit Clamping force: 330 ton Opening stroke: 675 mm Distance between tie bars: 710 x 630 mm Mould height min.: 330 mm Mould height max.: 710 mm Platen size (h x v): 1040 X 950 mm Injection unit Screw diameter: 50 mm Injection volume: 530 cm³ Shot weight: 480 g Injection pressure: 2426 bar Measurements and weight Dimensions: 6,5 X 2,0 X 2,3 m Machine weight: 14500 kg
