Crane motor, spare motor, DC motor DEMAG GDH 140 D2/1115 ( GDH140D2/1115 ) 9,5 kW 3135 rpm 400 V with encoder used, tested ! Dimensions: 950 x 380 x 320 mm
: 125 kg width:: 4 m length: 6,5 m : 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Ref. no.: 17195 Hersteller: DEMAG Year of construction: 1996 Clamping unit Clamping force: 80 ton Opening stroke: 450 mm Distance between tie bars: 400 x 400 mm Mould height min.: 250 mm Platen size (h x v): 580 x 590 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 149 g Injection pressure: 2020 bar Measurements and weight Dimensions: 3,9 Ã 1,4 Ã 1,9 m Machine weight: 3700 kg
E-chain hoist, electric hoist, crane DEMAG type PK 2N Factory no. Year of construction 1982 Load capacity: 500 kg Hook travel 2.2 meters Lifting speed 5 m/min. Cable length control bottle approx. 3.5 meters Mains connection 400 volts, 50 Hz. - 2 load trains = 500 kg Weight: 32 kg good condition; used
E-chain hoist crane DEMAG type PK1N-F Fabr. Nr. 5723572 year of construction: 1987 , load capacity: 125 kg , hook travel: 4.0 meters , lifting speed: 8 m/min. Fine lifting speed 2 m/min. Cable length control bottle approx. 1.5 meters Mains connection 380 volts, 50 Hz 1 load string = 125 kg - emergency stop Weight: 25 kg good condition; used
Electric chain hoist, electric hoist, crane DEMAG type DKUN 2-250 K V1 F4 Factory No. 61113041 Year of construction 2000 Load capacity 250 kg Hook travel 3.3 meters Main lifting speed 8 m/min. Fine lifting speed 2 m/min. Chain size 4.2 x 12.2 mm Cable length Control bottle approx. 1.7 meters Mains connection 400 volts, 50 Hz 1 load string = 250 kg - emergency stop Weight 31 kg good condition; used
Ref. no.: 18142 Producer: DEMAG Year of construction: 1997 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Distance between tie bars: 355 x 355 mm Mould height min.: 210 mm Platen size (h x v): 540 x 540 mm Injection unit Screw diameter: 35 mm Injection volume: 106 cm³ Shot weight: 95 g Injection pressure: 2573 bar Measurements and weight Dimensions: 3,65 x 1,15 x 1,18 m Machine weight: 3600-2500 kg
Column-mounted slewing jib crane DEMAG type KBK 100 Year of construction approx. 2008 Load capacity 80 kg Swivel range 270 Projection 2500 mm Construction height 1980 mm Height to lower edge Boom 1580 mm- Crane column KBK 100- Boom profile DEMAG C-profile sill KBK 1 - Base plate L x W x H = 260 x 260 x 25 mm (4 holes 18 mm ) - yellow lacquered Net weight approx. 100 kg good condition; used
Ref. no.: 18138 Producer: DEMAG Year of construction: 2006 Clamping unit Clamping force: 80 ton Opening stroke: 850 mm Distance between tie bars: 370 X 3370 mm Mould height min.: 200 mm Mould height max.: 510 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 22 mm Injection volume: 37 cm³ Shot weight: 32 g Injection pressure: 2580 bar Measurements and weight Dimensions: 4,50 X 1,28 X 1,95 m Machine weight: 4750 kg
E-chain hoist crane DEMAG type PK1N-F Fabr. No. 5533406 Year of construction 1983 Payload 125 kg Hook travel 3.8 meters Lifting speed 8 m/min. Fine lifting speed 2 m/min. Cable length control bottle approx. 1.2 meters 1 load line = 125 kg mains connection 380 Volt, 50 Hz Weight: 25 kg good condition; used
Suspended crane runway crane system DEMAG type KBK 1 Year of construction approx. 2000 Monorail overhead conveyor with monorail Crane bridge Light crane system made of KBK modular system profiles Load capacity: 125 kg Span: 5 meters Distance longitudinal rails: 4.1 meters Longitudinal member length complete: 12 meters Girder profile cross beam = KBK1 Carrier profile longitudinal track = KBK1 Consisting of: 29 meters system profile KBK-1 (4x 6000 mm + 1x 5000 mm) 1 piece carriage for the Crane suspension 2 pieces Double carriage for the longitudinal rails 10 pieces screw claws for crane suspension or ceiling mounting (without carrier clamps) 6 pieces End cover suitable for the track KBK1; used
E-chain hoist, electric hoist, crane DEMAG type DKUN 1-100 K V1 F4 Fabr. Ref.61801899 Year of construction 1997 Payload 100kg Hook travel 3 meters Main lifting speed 8 m/min. Fine lifting speed 2 m/min. Chain size 3.6 x 10.6 mm cable length control bottle approx. 1.7 meters Mains connection: 400 volts, 50 Hz 1 load line = 100 kg net weight 16.5 kg good condition; used
E-chain hoist crane DEMAG type PM 12LF Manulift Fabr. No. 5877813 Year of construction 1990 Payload 125 kg Hook travel 3.5 meters Lifting speed 12 m/min. Fine lifting speed 2 m/min. Motor power 0,32 / 0,05 kW Mains connection 400 Volt, 50 Hz 1 load line = 125 kg Manulift hand control directly on the crane hook Good condition; used
E-chain hoist, electric hoist, crane DEMAG type DKUN5-500-K-V1F4 Fabr. SKU: 61077868 Year of construction: 1999 Payload 1000 kg Hook travel 6.5 meters Hood lifting speed 10 m/min. Fine lifting speed 1.6 m/min. 2 load trains = 1000 kg mains connection 400 volts, 50 Hz. - Electric chassis DEMAG, type EU/RU 22 DK, 13/6 PF 12/4- Chassis for double T-beams, carrier width 120 to 280 mm - 2 travel speeds 4.6 m/min and 14 m/min - Cable length of the operating bottle 4.5 meters Weight 130 kg good condition; used
screw size: unbkt mm injection shot weight in Polysterol: unbkt g/PS closing pressure: 100 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
screw size: unbkt. mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 150 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Demag, Year: 1999, Hight of column mm: 8000, Traglast kg: 500, Year :1999
Manufacturer: Demag, Year: 1999, Hight of column mm: 8000, Traglast kg: 500, Year :1999
Main hoist cap: 20 ton Secondary hoist cap: 3,2 ton no radio control, control with wire Kind of: overhead travelling crane Capacity: 20 ton + 3,2 ton Span: 17 855 mm Drop: 9000 mm Weight: 15 ton Numbre of riggers : double rigger
: DEMAG : . : 20 Euro . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Demag 20 ton + 3,2 ton x 17 855 mm Kind of: overhead travelling crane Capacity: 20 ton + 3,2 ton Span: 17 855 mm Drop: 9000 mm Weight: 15 ton Numbre of riggers : double rigger
Electric chain hoist make DEMAG type PK 5 NMachine -No: 730966, built in 1970Capacity: 500 kgLifting height: 3 mSpeed: 10 m / min.With- 1-levelused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
Motorized slewing crane make DEMAGTechnical specifications:Load capacity: 2000 kgOutrigger: 5000mmLifting height: 5000mmWith- Demak PK 10 electric chain hoistused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
Lifting capacity: 10000 kg Hoist height: 12000 mm Span length: 23600 mm Type: Overheadcrane MACH-id 3133 MAKE Demag TYPE ZLK YEAR 2010 SPECIFICATIONS Span 23.600 mm Height of lift 12.000 mm SWL / Kg 10.000 kg demag overhead crane
Lifting capacity: 20000 kg Hoist height: 0 mm Span length: 24500 mm Type: Overhead crane DEMAG Demag Overheadcrane 24500 x 20 ton MACH - ID 6331 Make: DEMAG YOP: 1997 Span24.500 mm Capacity Kg20.000 kg
Lifting capacity: 500 kg Hoist height: 3000 mm Span length: 4000 mm Type: Swivel Crane Span ca 4000 mm Height of lift ca 3000 mm SWL / Kg 500 kg
Capacity (x): 0 Process Application: 0 Other Info: 0 Technical data Max. Load: 500 kg Various accessories: Electronic hand held remote control
arm length: 2.200 mm height of hook: 2.600 mm weight of the machine ca.: 1,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lifting capacity: 2,5 t weight of the machine ca.: 80 kg : : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 2 Stück im Paket lifting capacity: Magnet 1: 15 t lifting capacity: Magnet 2: 9 t width: ca. 1.200 mm length: ca. 650 mm : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
