We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Manufacturer:
(Category: 102-118)
used
turning diameter over bed: 270 mmturning diameter over slide rest: 130 mmturning length: 500 mmspindle turning speed - stepless: 40-3000 U/minweight of the machine ca.: 1 tdimensions of the machine ca.: 1.5x0.8x1.7 mDigital read-out HEIDENHAINMisc.accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 270 mmturning diameter over slide rest: 130 mmturning length: 500 mmspindle turning speed - stepless: 40-3000 U/minweight of the machine ca.: 1 tdimensions of the machine ca.: 1.5x0.8x1.7 mDigital read-out HEIDENHAINMisc.accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Center distance 5,000mm Height of the tips 600mm 105mm bar passage carriage equipped with grinding Machine in very good condition
used
Tip height: 250 mm Center width: 2000 mm Circumferential Ø: over bed 500 mm Spindle bore: 50.8 mm Spindle holder: size 6 Pick-up cone tailstock: 5 MK Spindle speeds: 22 - 2000 rpm Feeds: longitudinal/flat 0.05-6.4/0.025-3.2 mm/rev Thread pitches: 80 - 1 mm Electrical connection: 380 V, 5.5 kW Space requirement: 3600 x 1100 x 1500 mm Weight: 1875 kg
used
Tip height: 250 mm Center width: 1500 mm Circumferential Ø: over bed 500 mm Spindle bore: 56 mm Spindle mount: size 8 Pick-up cone tailstock: 6 MK Spindle speeds: 11.2 - 1400 rpm Feeds: longitudinal/flat 0.027-3.8/0.013-1.9 mm/rev Thread pitches: 0.5 - 36 mm Electrical connection: 380 V, 2 x 5.5 kW Space requirement: 3600 x 1250 x 1300/1600 mm Weight: 3000 kg
used
Center distance 11,000 mm Turning diameter 730 mm Drill height 500 mm turnable on the bench 1050 mm Motor power 22 kW
used
max. turning length: 1000 mm, center height: 250 mm, hollow spindle diameter: 60 mm, max. speed: 2240 rpm, with 3-jaw chuck, Fabr. SCHUNK, type: ROTA-S-PLUS, diameter: 250 mm, with machine light, steady rest and Multifix steel holder
used
turning diameter over bed: 570 mmturning diameter over slide rest: 365 mmturning length: 1500 mmcentre distance: 1800 mmspindle turning speed range: 11-2240 U/minspindle bore: 62 mmweight of the machine ca.: 4 tMisc accessoriesMore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description Lead and pull spindle lathe VDF Boehringer Göppingen Details Height 1,400 mm Width 1,300 mm Length 4,150 mm Bed width 480 mm Bed height 850 mm Bed length 3,000 mm Face plate Ø 600 mm Forkardt Wedge Bar Chuck Ø 315 mm max. workpiece lengths 2,000 mm Turning diameter over bed 680 mm Turning diameter over support 480 mm Center height 340 mm Drive power 6.5 / 10 kW Lynette Ø 320 mm Multifix holder size C with 5 cassettes
used
Description Lead and pull spindle lathe VDF Boehringer Göppingen Details Height 1,500 mm Width 1,700 mm Length 4,000 mm without tailstock Bed width 550 mm Bed height 800 mm Bed length 2,000 mm Face Plate Ø 900 mm Forkardt Chuck Ø 500 mm without tailstock, but can be placed Max. workpiece lengths without tailstock 1,500 mm Turning diameter over bed 800 mm Turning diameter over support 640 mm Center height 400 mm 6 pieces of baking 4-fold turning steel holder
Center height: 400 mm Center width: 1250/1300 mm Circumferential Ø: over bed 440 mm Spindle bore: Spindle holder: Pick-up cone tailstock: 5 MK Spindle speeds: 11.2 - 2240 rpm Feeds: longitudinal/flat 0.1-2.8/0.05-1.4 mm/rev Thread pitches: Electrical connection: 380 V, 11 kW Space requirement: 3400 x 1400 x 1300/1700 mm Weight: approx. 2700 kg
used
turning length: 3000 mmturning speeds: 1400 U/mincentre height: 315 mmturning diameter: 630 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Tip height: 265 mm Center width: 1500 mm Circumferential Ø: over bed 540 mm Spindle bore: 65 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 9 - 1800 rpm Feeds: longitudinal/flat 0.063-2.24/0.032-1.12 mm/rev Thread pitches: 0.35 - 560 mm Electrical connection: 380 V, 11 kW Space requirement: 4580 x 1250 x 1330 mm Weight: 3200 kg
used
VOEST DA 360 - Lead & Pull Spindle Lathe -Heidenhain digital display -Peak height above bed 400mm -Turning diameter over bed 800mm -Turning diameter over support 500mm -Turning length 1000mm -Rod passage approx. 87mm -Speed range 14 - 1000 rpm / 18x speeds -Automatic length / face feeds -Automatic input Z-axis -Tailstock MK 5 -Wedge bar chuck 250mm -Multifix base holder with insert -Work light -Machine feet -Documentation Dimensions: LxWxH 3x1.5x1.7 meters / Weight 3500 KG
used
Turning length: max. approx. 1000 mm, centre height: approx. 250 mm, with coolant device, machine light, 4-jaw chuck, diameter: approx. 250 mm, hollow spindle diameter: 60 mm
used
Built in 1990 Center height 180 mm Turning diameter over carriage 190 mm Center width 1,000 mm Spindle passage 55 mm Max. spindle speed 13-2,000 rpm Spindle drive 7.5 kW Quill stroke 150 mm (MK4) Machine weight 1,650 kg Accessories: Digital display, 3-jaw chuck, quick-change steel holder with 4 inserts, 2 steady rests, coolant device.
used
Weiler Commodor – lead and pull spindle lathe (partially overhauled, built approx. 1990) Condition: Partially overhauled, very good general condition Year of construction: approx. 1990 Manufacturer: Weiler Model No.: Commodor Machine Type: Lead and Pull Spindle Lathe Technical data (approx. information): Max. turning diameter over bed: 380 mm Max. turning diameter over support: 190 mm Max. turning length: 1000 mm Bar Passage: 56 mm Speed range: 25 – 2000 rpm Spindle Nose: A2-6 Drive power: 4.0 kW Tailstock: MK4 Automatic longitudinal and flat feeds: 0.011 – 0.80 mm/rev Thread ranges: Metric: 0.3 – 10 mm Inch: 80 – 2 3/4 G/" Diametrically Pitch: 80 – 5.5 Dp Module: 0.2 – 5 Dimensions (L x W x H): 2200 × 1200 × 1800 mm Weight: approx. 1500 kg ⚙️ Equipment & Accessories: 3-Axis Digital Display SINO (New) ...
used
WEILER COMMODOR L&Z lathe from school operation -Turning length 1000mm -Turning diameter max. 180mm Bar Passage 56mm -Speed range 56-2000 rpm (gearbox) -Automatic longitudinal/plane feeds - Thread: Metric/Inch/etc. -Tailstock Mk4 -Three-jaw chuck approx. 200mm -Multifix base holder with insert -Tailstock MK 4 -Coolant device -Electric lining protection -Work light -Swarf back wall -Guide and pull spindle cover -2x Emergency / Off -Machine documentation -Good operational condition Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg
used
Hamlet of Commodor B -GS - Identifier -3 - Axis digital display "NEW" - Tip height 180mm - Center width 1000mm - Spindle passage56mm - Spindle speed 25-2000 rpm - Automatic longitudinal + face feeds - Thread / Metric / Inch / Diametrical / Module - Four-jaw chuck - Electric lining protection -2x Emergency / Off -Swarf back wall -Coolant device - Work light - Multifix with inserts -Documentation
used
Weiler Commodor B incl. 3 - axle digital display /Heidenhain - GS - Identifier - 3 - Axis digital display - Tip height 180mm - Center width 1000mm - Spindle passage56mm - Spindle speed 25-2000 rpm - Automatic longitudinal + face feeds - Thread / Metric / Inch / Diametrical / Module - Three-jaw chuck - Feed protection - 2x Emergency / Off - Swarf back wall - Multifix with inserts -Machine feet - Documentation Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg
used
WEILER Condor lead and pull spindle lathe (overhauled) Circumferential diameter over bed 300 mm Center width 800 mm Turning diameter over carriage 170 mm Gr. workpiece weight between the tips 100 kg Bed width 240 mm Spindle bore 38 mm Spindle speeds 24 - 2800 rpm Spindle motor 3 KW Z-travel 800 mm X-travel 170 mm Z1-travel 100 mm Lead screw diameter 24 mm Thread pitches: 35 Metric 0.35 - 12 mm 40 Witworth 2 - 45 Gg / " 25 Module 0.2 - 4 Module 32 Diametrical Pitch 5 - 90 D.P. Tailstock quill stroke 110 mm Tailstock quill diameter 50 mm Tailstock quill cone 3 MK 2-axis digital display 3-jaw chuck Multifix holder B with 8 cassettes Rotating grain tip Tailstock Thread Device: Metric, Witworth, Module, Diametral Pitch Geometrically outdated!
used
max. turning length: approx. 800 mm, centre height: approx. 150 mm, hollow spindle diameter: approx. 50 mm, with 3-axis digital display, Fabr. ELESTA, type: VISULESTAIIE, with multifix steel holder, magnetic chuck, coolant device, splash guard and machine light as well as various machine accessories
used
L & Z lathe / WEILER CONDOR AC / Stepless speed regulation / FROM A TRAINING FACILITY - CE - Marking -Year of manufacture 2000 -Turning diameter over face slide 180mm -Tip height 165mm -Max. turning diameter 330mm -Turning length approx. 800mm -Speed (infinitely variable) max. 2800 rpm -Automatic longitudinal/plane feeds -Thread/Metric/Inch etc. -Three-jaw chuck -Tailstock -Swarf back wall -Machine light -Multifix base holder & 6x inserts -Various interchangeable wheels -Coolant device -Miscellaneous operating tools -Documentation Dimensions: LxWxH 1.8x1x1.8 meters / Weight 1300Kg
used
Tip height: 125 mm Center width: 800 mm Gr. turning Ø over bed/over carriage guide: 280/245 mm Spindle holder, thread according to DIN 800 Spindle bore: 24 mm Spindle speeds infinitely adjustable: 26 - 2000 rpm 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm 44 Inch Thread: 4 - 112 Gg/" electr. Connection: 380 V, 0.7/1.4 kW Space requirements: Weight approx.: 500 kg
used
WEILER LZ330 / From educational institution incl. new 3-axis digital display -Turning diameter over bed 330mm -Turning diameter over support 165mm -Turning length 800mm -Speed range 25 - 2800 rpm -Automatic / longitudinal plan feeds -Multifix with 3x inserts -Drive power 3KW -Three-jaw chuck -Collet device with 20x collets -Copying device -Miscellaneous Accessories -Documentation Dimensions: LxWxH 1.8x0.7x1.6 meters / Weight 750Kg
used
Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm -Feed range longitudinally over belt: 0.05–0.40 mm/rev -Feed range longitudinally via interchangeable gears: 0.018–0.800 mm/rev - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Wedge bar chuck Forkardt F 160 -Quick-change holder Multifix -4 lathe chisel holders -Drill chuck -Moving centering tip Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg
used
Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm / Stepless speed adjustment -Coolant pump -Lining protection -Three-jaw chuck -Quick-change holder Multifix & insert -Documentation Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg
used
Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm -Feed range longitudinally over belt: 0.05–0.40 mm/rev -Feed range longitudinally via interchangeable gears: 0.018–0.800 mm/rev - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Wedge bar chuck Forkardt F 160 -Quick-change holder rotary flash -4 lathe chisel holders Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg
used
turning diameter over bed: 297 mmturning diameter over slide rest: 160 mmturning length: 800 mmtotal power requirement: 2 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 1,811,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
L+Z Lathe WEILER Praktikant 160 – Partially Overhauled Machine in very good used condition – delivery on order, delivery time by arrangement! ✅ Technical data Year of construction: approx. 1990 Digital Display: 3-Axis (NEW) Max. turning diameter over bed: approx. Ø 320 mm Max. turning diameter via support: approx. Ø 198 mm Max. turning length: approx. 650 mm Bar passage: approx. Ø 40 mm Spindle speed: 96 – 2500 rpm Spindle nose: A 2 - 5 Drive power: approx. 2.2 kW Threading: Metric, Inch, DP, Module Tailstock: MK 3 Dimensions (LxWxH): approx. 1700 x 1000 x 1700 mm Weight: approx. 650 kg ✅ Accessories 3-jaw chuck 160 mm (NEW) Quick-change steel holder + 1 insert Electric Lining Guard (NEW) Work light (NEW) Complete machine documentation Emergency stop Various tension wrenches Coolant Setup L+Z Spindle ...
used
WEILER Intern 800R Ladder & Pull Spindle Lathe -Turning diameter over bed 300mm -Turning diameter over support 150mm -Turning length 800mm -Spindle bore 42mm -Speed range 40 - 2000 rpm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK 3 -Drive power 3KW -Multifix with inserts -Three-jaw chuck 160mm -Lining protection -Swarf back wall with work light -Interchangeable wheels -Drill chuck -Rod passage 42mm -Tool cabinet -Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 750Kg
used
Specifications: Year of construction approx. 1988 Center height 120 mm Center width 430 mm Speed: 60 - 3000 rpm in 18 gear stages Spindle Passage 23 mm Short taper spindle head DIN 55027 Tailstock MK 2 Feeds from 0.03 to 0.15 mm /rev Possible Threads Metric, Inch, Module and Diametrical Pitch Metric thread pitches from 0.25 to 2.5 mm Length 1.2 m, height 1.3 m, depth 0.65 m
used
Tip width: 430mm Tip Height: 120mm Spindle bore: 23mm Spindle speeds: 60-3000 RPM Short taper spindle head DIN 4 Tailstock MK2 Feeds from 0.03 to 2.5 mm Weight approx. 360 kg New Aikron 3-axis digital display, brake of spindle motor renewed, technically checked. Accessories: Collet device, lathe chuck Quick-change steel holder
used
Lg.Nr. 26208 Technical data: - Center height 120 mm - Center width 450 mm - Largest circulation – Ø over bed 250 mm - Spindle bore 23 mm - Spindle mount with threaded nose DIN 55027 - Mounting cone of the tailstock quill MK 2 - 20 spindle speeds 60 - 3000 rpm - Feeds - longitudinal 0.03 - 3.0 mm - Flat 0.015 - 0.150 mm - Thread pitches 0.25 - 5 mm - Drive 400 V / 1.1 / 1.5 kW - Space requirement approx. W 1200 x H 1250 x D 650 mm - Weight approx. 700 kg - with: - 3-jaw chuck, - Quick-change steel holder - Moving grain tips - Separate tool cabinet with various accessories
used
Workspace Center width 1000 mm Turning diameter over bed 356 mm Circulating Ø over support 220 mm Bed width 206 mm Travel X-axis travel 178 mm Travel Z1 axis 92 mm Bsncqtycvju Swivel range upper slide ± 50° Main spindle Speed range, High 550 1/min - 3000 1/min Speed range, Low 30 1/min - 550 1/min Spindle mount Camlock D1-4 Spindle bore 38 mm Spindle Taper 5 MK Feed Feed X-axis 0.014 mm/rev - 0.206 mm/rev Feed Z-axis 0.043 mm/rev - 0.653 mm/rev Tapping Tapping, Metric (37) 0.4-7 mm Tapping Whitworth (28) 4-56 TPI Tailstock Tailstock quill diameter 45 mm Tailstock cone 3 MK Tailstock quill stroke 120 mm Tailstock transverse adjustment ± 10 mm Drive power Motor power main drive 4 kW Dimensions and weights Dimensions (length x width x height) 1.95 m x 0.75 m x 1.55 m Weight 880 kg
used
Lead and pull spindle lathe WEIPERT Year of Make: 1956 Spindle bore: 90 mm Center width: 3000 mm Circulation Ø over bed : 800 mm Circulation 0 over slide: 610 mm Circulation 0 in offset: 1120 mm Speed range: 7.5 – 475 rpm With the following accessories: Multifix tool holder with 11 inserts Coolant Setup Three-jaw chuck 0315 mm Three-jaw chuck 0 400 mm Three-jaw chuck 0 500 mm Face Plate 0 400 mm Face Plate 0 800 mm Face Plate 0 1000 mm Running Lynette Various turning tools (30 pcs. indexable insert tools) 2 moving centering tips 1 drill chuck Operating instructions
used
Turning diameter 410mm Turning length of 1000mm CE certification proves the best possible safety Complete series in above-ground construction Speed up to 3000rpm Center width 1000mm Turning Ø over bed 410mm Turning Ø over support 255mm Hbcfxifg Turn Ø in Bridge ----- Speed/Steps 50-3000 rpm / Stepless Tailstock mount MK 4 Feed longitudinal 0.025-085mm/rev Feed transverse 0.05-1.7mm/rev Motor 5.5KW
used
Description Lead and Pull Spindle Lathe Weisser Heilbronn Details Built in 1969 Height 1,700 mm Width 1,500 mm Length 3,100 mm Bed width 500 mm Bed height 850 mm Bed length 2,000 mm Face plate Ø 600 mm Food possible by arrangement max. workpiece lengths 1,300 mm Turning diameter over bed 800 mm Turning diameter over support 560 mm Center height 400 mm Spindle speed 1,120 rpm. Multifix holder size C with 5 pockets
used
turning diameter over bed: 600 mmturning diameter over slide rest: 390 mmturning length: 1000 mmcentre height: 295 mmturning speeds: 72-1400 UpMtotal power requirement: 15 kWweight of the machine ca.: 4.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
TECHNICAL DATA Lathe Weisser Heilbronn Model No.: SENIOR Y.O.M. 1984 Centerheight 410 mm Swing over bed 810 mm Swing over Support 564 mm Spindle bore 105 mm max Workpieceweight between chuck and Pinole 22 tons Spindlerevolotions 8 -- 1250 Rev/min Main motor 15 kW Rapid traverse longitudinal 4 Jaw chuck 700 mm Moving Protection for guideaways longitudinal Digital Read Out 1 Steady Rest 0 - 130 mm Quick change Toolpost with inserts Coolant
used
Digital Center height 150 mm Circulation over bed 300 mm Center width 1000 mm 3-jaw chuck, Arbor Chip protection Chip tray
used
turning diameter over bed: 400 mmturning diameter over slide rest: 230 mmturning length: 1100 mmcentre height: 220 mmspindle bore: 45 mmspindle turning speed range: 45-2000 U/minweight of the machine ca.: 2.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Offer 24177 Specifications: - Tip height 180 mm - Center width 1000 mm - larger circulation – Ø over bed 355 mm - via flat sleds approx. 200 mm - Spindle bore 36 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm -Feeds - Travel of the cross slide approx. 200 mm - Travel of the upper slide approx. 115 mm - Drive 400 V / 5.8 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg
used
Offer 24178 Specifications: - Center height 250 mm - Center width 2000 mm - larger circulation – Ø over bed 490 mm - via flat sleds approx. 300 mm - Spindle bore 72 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 25 - 1160 rpm -Feeds - Travel of the cross slide 200 mm - Travel of the upper slide 115 mm - Drive 380 V / 5.5 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 3500 x H 1500 x D 1300 mm - Weight approx. 3000 kg
new
Zimas D290V - Lathe Special price € 2,800 instead of € 3,490 excl. VAT - 2-axis position indicator - Stepless speed adjustment with digital display - Plan feed - Camlock mount C4 - Upper slide can be rotated 360° - Tailstock adjustment +/- 5 mm for taper turning Accessories - Undermount with 1x door & 3x drawer - Three-jaw chuck 160 mm with interchangeable jaws - Fixed bezel - Centering tip - Operating tools Specifications Range: - Circumferential Ø over bed: 290 mm - Circulating Ø over cross slide: 180 mm - Turning length between tips: 700 mm - Bed width: 182 mm Headstock: - Spindle bore: 38 mm - Spindle nose: MK5 - Speed levels: infinitely variable - Speed range: 80 - 2000 rpm Feed: - Metric threads: 0.2 - 3.5 mm / 18 steps - Inch thread: 8 - 56 dpi / 21 levels - Longitudinal feed: 0.085 - 0.832 mm - Transverse feed: 0.01 - 0.10 mm Sleds a ...
used
Tip height: 150 mm Center width: 760 mm Swivel Ø over bed/support slide: 300/165 mm Spindle bore: 32 mm Spindle holder, short taper according to DIN 55027: Gr. 5 Tailstock quill taper: MK 3 12 spindle speeds: 85 - 2000 rpm 48 feeds: 0.006 - 1.77 mm 48 metric thread pitches: 0.1 - 28 mm 58 Inch Thread: 75 - 2.5 Gg/" 19 module threads: 0.1 - 1.75 module 19 Diametrical Pitch Thread: 70 - 4 DP electr. Drive: 220/380 V, 1400 rpm, 2.2 kW Weight: 800 kg Space requirement: 1800 x 770 x 1300 mm