used Universal processing centres for sale

5-axis simultaneous, X / Y / Z 750 mm / 600 mm / 520 mm, Heidenhain iTNC 530, 18,000 rpm. SK40, IKZ, 120 pos. Tool changer, touch probe

Inv. Num. : 5211 Type: DMU 80 P Producer: Deckel Maho Generated: 2000 Parameters: Control system: Heidenhein TNC 430 Switch-on hours: 87285 h Hours: 34100 h Minimum vertical spindle speed: 20 1/min Maximum vertical spindle speed: 12000 1/min X-axis travel: 800 mm Y-axis travel: 650 mm Z-axis travel: 550 mm Cone: ISO 40 Number of all tools: 30 pieces Equipment: IKZ Workpiece Probe Conveyor Spindle cooling 2020: Replacement of the PILS contactors New E/R module New X/Y Module 2019: Lock Replacement Workpiece Probe Sensor Replacement Replacing the hydraulic hose of the tool clamp 2018: New X/Y axle bolt Replacement of the Y-axis blind Replacement of the B-axis planetary gearbox New motor and B-axis measuring cable 2016: New spindle bearings System Replacement Replacing the UV105 power supply Replacement of the spindle mod ...

CNC Universal Machining Center DECKEL MAHO HSC 75 linear NEW DMG Design With track control Heidenhain iTNC 530 Year of Make: 2012 Travel distances : X 750 Y 600 Z 560 Speed range : 20 - 18,000 rpm continuously variable ( HSK 63) With the following accessories: NC rotary table 0 750 mm clamping surface Controlled B axis + 10/-110° Vertical tool changer with 60 magazine positions ( HSK 63 ) Full protection cab with interior lighting Coolant system, Coolant temperature control IKZ 80 bar (980 l tank) with paper belt filter Chip conveyor with scraper belt Laser Tool Measurement BLUM 3 D Probe Application Tuning Cycle Blowing air external, blowing air in the middle of the spindle Operating mode 3 + 4 Electronic handwheel Oil mist extraction Advanced Chip Flushing, Rinsing Gun Rotoclear 3 Pieces Height Adjustable Machine Shoes Operating instructions

1 gebr. 5-axis machining center Make: Deckel Maho Model: DMU 50 Year of Make: 2011 Control: Heidenhain iTNC 530 _____________________________________________________________________________________________________________ Specifications: Travel X - Axis 500 mm Travel Y - Axis 450 mm Travel Z axis 400 mm Swivel range -5/+110 Clamping surface Ø 630 x 500 mm Table load 200 kg Rapid traverse 30 m/min. Speed 10,000 rqm Spindle drive 13 kW Tool magazine places 16 Tool holder SK 40 Machine weight approx. 4.5 t Accessories: 2 Axis Swivel Rotary Table ( Simultaneous ) Electronic handwheel Preparation of the Infrared Probe Heidenhain Documentation The machine can be operated under power. Measurement protocol is available.

Control Heidenhain 426 Travel X/Y/Z: 500 x 380 x 380 mm Clamping area 500 x 400 mm Tool magazine for 24 Wkz., SK 40 Speed 15,000 min-1 NC rotary and swivel table

Control Heidenhain Mill-Plus Travel X/Y/Z: 500 x 380 x 380 mm Clamping area 500 x 400 mm Tool magazine for 24 Wkz., SK 40 Speed 8,000 rpm NC rotary and swivel table Conveyor

x-travel: 800 mmy-travel: 700 mmz-travel: 600 mmturning speeds: 12000 1 U/min: control: Heidenhain total power requirement: 59 kWweight of the machine ca.: 10,6 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8183 Type: DMU 100T Producer: DMG Created: 2001 Parameters: Control system: HEIDENHAIN Work table length: 1500 mm Work table width: 795 mm Speed: 10000 1/min X-axis travel: 1080 mm Y-axis travel: 710 mm Z-axis travel: 710 mm Machine weight: 9700 kg

Inv. Num. : 8243 Type: DMU 60 P Producer: DMG Generated: Parameters: Work table length: 1000 mm Work table width: 600 mm Number of axles: 5 pieces X-axis travel: 600 mm Y-axis travel: 525 mm Travel Z axis: 500 mm Speed: 12000 1/min Machine weight: 4000 kg

5-axis simultaneous, New spindle 2018, X / Y / Z 750 mm / 600 mm / 520 mm, Heidenhain iTNC 530, 18,000 rpm. SK40, IKZ, 120 pos. Tool changer, touch probe

x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmControl: SIEMENS 840D table - swivable +/-: +110 / -5 °-C-axis table rotating: 360° tool piece magazine with: 16 Werkzeugplätzen weight of the machine ca.: 3.9 tdimensions of the machine ca.: 2.9 x 2.0 x 2.5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8444 Type: UMC 500 Producer: HAAS Created: 2021 Parameters: Control system: HAAS Switch-on hours: 3043 h Table diameter: 400 mm Maximum table load (even): 226 kg Spindle drive power: 22.4 kW X-axis travel: 610 mm Y-axis travel: 406 mm Travel Z-axis: 406 mm Speed: 10000 1/min Maximum feed speed axis X: 16.5 m/min Maximum feed speed axis Y: 16.5 m/min Maximum feed speed axis Z: 16.5 m/min Cone: ISO 40 Number of all tools: 30 pieces Rapid traverse X/Y/Z: 22.9 m/min Machine weight: 5400 kg Equipment: Conveyor Renishaw workpiece probe Tool Holder Tools Renishaw tool probe Wi-Fi camera in the machine working room

x-travel: 762 mmy-travel: 508 mmz-travel: 508 mmB-axis (table): +120/-35 Gradc-axis: 360 Gradcontrol: HAAS für 5 Achsentool piece magazine with: 40 Plätzennumber of spindle speeds: 12000 U/mindimensions of the machine ca.: 4.3 x 2.35 x 2.8 mweight of the machine ca.: 8.5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8298 Type: UMC 750 Producer: HAAS Created: 2020 Parameters: Control system: HAAS Switch-on hours: 7037 h Hours: 5222 h Table diameter: 500 mm Maximum table load (even): 300 kg Spindle drive power: 22.4 kW Number of axles: 5 pieces Maximum spindle speed: 8100 1/min X-axis travel: 762 mm Y-axis travel: 508 mm Travel Z-axis: 508 mm Max. tool diameter: 127 mm Max. tool length: 305 mm Max. tool weight: 5.4 kg Number of Stack Positions: 30 1 Axis C: 360 st

x-travel: 762 mmy-travel: 508 mmz-travel: 508 mmB-axis (table): +120/-35 Gradc-axis: 360 Gradcontrol: HAAS für 5 Achsentool piece magazine with: 40 Plätzennumber of spindle speeds: 12000 U/mindimensions of the machine ca.: 4.3 x 2.35 x 2.8 mweight of the machine ca.: 8.5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Heidenhain iTNC 530 Travel: X-axis F/H 2,600 / 2,030 mm Y-axis 750 mm Z-axis F/H 695 / 800 mm Total clamping area 3,080 x 750 mm T-slots 7 pieces Table load: approx. 2,500 kg Integrated rotary table Ø 750 mm Interference circle diameter 1,100 mm Workpiece weight approx. 800 kg Mount: HSK 63 Tool magazine (incl. standby): 230 times Spindle speed: 50 - 12,000 rpm Equipment - Oil mist extraction - Internal cooling (IKZ) 25 bar - SKM 900 inclined bed filter system. -Conveyor - 3D probes - Electronic handwheel - Standby Magazine

Heidenhain TNC 430, 12,000 rpm SK40, touch probe, extractor, chip conveyor, electronic handwheel. XYZ= 800x600x500 mm. Clamping devices not included.

Inv. Num. : 8434 Type: BX900T Producer: Pinnacle Created: 2019 Parameters: Control system: Heidenhain TNC 640 Switch-on hours: 13002 h Hours: 9507 h Work table length: 1700 mm Work table width: 850 mm Maximum table load (uniform): 1200 kg Speed: 15000 1/min X-axis travel: 1500 mm Y-axis travel: 900 mm Travel distances Z-axis: 1100 mm Max. machining diameter: 800 mm Number of Stacking Positions: 60 pieces Machine weight: 17000 kg Equipment: Vises (2 pieces) Heidenhain Tool Probe Workpiece probes Heidenhain VERO clamping (Schunk brand) Clamps (approx. 79 pcs.)

Inv. Num. : 8227 Type: U-620 Producer: Spinner Created: 2011 Parameters: Control system: Siemens Number of axles: 5 pieces X-axis travel: 620 mm Y-axis travel: 520 mm Travel travel Z-axis: 460 mm Maximum vertical spindle speed: 10000 1/min

Inv. Num. : 8225 Type: U5-1520 Producer: Spinner Created: 2012 Parameters: Control system: Siemens Work table length: 820 mm Work table width: 540 mm Number of axles: 5 pieces Speed: 12000 1/min X-axis travel: 1520 mm Y-axis travel: 520 mm Travel travel Z-axis: 460 mm Table diameter: 560 mm