133 offers

Manufacturer:
Manufacturer:
Your found location: Latitude 0.0 + Longitude 0.0
Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:
boring mills and machining centers / Vertical Processing Centers
12.11.2026
approved
dealer
item-No.: 162746391
New in: 2011

used

check
Location: Land-cz

Inv. Num. : 9105 Type: MIKRON VCE 800 PRO Producer: Agie Charmilles Created: 2011 Parameters: Control system: HEIDENHAIN iTNC 530 Work table length: 910 mm Work table width: 500 mm Maximum table load (uniform): 1100 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 540 mm Machine weight: 5000 kg

boring mills and machining centers / Vertical Processing Centers
12.11.2026
approved
dealer
item-No.: 162751677
New in: 2011

used

check
Location: Land-cz

Manufacturer: AWEA Model No.: A+1600 Year: 2011 Condition: Used Stock No: 9497 Control System: FANUC Series 18i-MB Switch-on hours: 1727 h Operating hours: 374 h Work table length: 1700 mm Work table width: 800 mm Maximum table load (uniform): 2000 kg Spindle drive power: 20 kW Maximum vertical spindle speed: 6000 1/min X-axis travel: 1600 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Cone: BT 50 Number of all tools: 24 pieces Machine weight: 15000 kg

boring mills and machining centers / Vertical Processing Centers
30.10.2026
approved
dealer
item-No.: 162747227
New in: 2008

used

check
Location: Land-cz

The machine is in good technical condition, after prior agreement it is possible to test it. Number of controlled axes: 3 Cast iron structure, prismatic guide surfaces Spindle taper: ISO 40 Max. speed 8000 rpm Power (continuous/30min): 7.5/11kW 2 gears Table dimensions: 1050x600mm Max. workpiece weight: 850kg X/Y/Z axis strokes: 850/600/600mm Tool change: 24pcs.

boring mills and machining centers / Vertical Processing Centers
12.11.2026
approved
dealer
item-No.: 162751142
New in: 2007

used

check
Location: Land-cz

Manufacturer: AXA Model No.: DBZ Year: 2007 Condition: Used Stock number: 9465 Work table length: 1350 mm Work table width: 600 mm Number of axes: 4 pieces X-axis travel: 2x 750 mm Y-axis travel: 550 mm Z-axis travel: 600 mm In 2022, GO was carried out. Equipment: Technical documentation Chip conveyor Round Table Workpiece feeding Workpiece Remover Handwheel 2x hydraulic power unit for vices

boring mills and machining centers / Vertical Processing Centers
12.11.2026
approved
dealer
item-No.: 162736749
New in: 2014

used

check
Location: Land-cz

Inv. Num. : 4891 Type: VHC3-XTS Produzent: AXA Erzeugt: 2014 Parametern: Steuerungssystem: Heidenhain iTNC530 Einschaltstunden: 22010 h Betriebsstunden: 7118 h Arbeitstischlänge: 2200 mm Arbeitstischbreite: 700 mm Maximale Tischbelastung (gleichmäßig): 3000 kg Anzahl der Achsen: 5 Stücke Minimale Vertikalspindeldrehzahl: 20 1/min Maximale Vertikalspindeldrehzahl: 10000 1/min Verfahrwege X-Achse: 2600 mm Verfahrwege Y-Achse: 1000 mm Verfahrwege Z-Achse: 950 mm Kegel: SK40 Ausstattung: Achse C - integrierter NC-Drehtisch mit einem Durchmesser von 800 mm Achse B - Spindelneigung /- 100° Teiler zum Teilen des Arbeitsbereichs Sonde Schraubstock

boring mills and machining centers / Vertical Processing Centers
02.11.2026
approved
dealer
item-No.: 162755037
New in: 2000

used

check
Location: Land-cz

The machine is in good technical condition and can be tested by prior arrangement. It includes a chip conveyor or a separate chip tray, a Renishaw probe, a large number of SK40 tool holders (housed in a separate cabinet, as shown in the photos), and a Heidenhain TNC426 control system. Complete documentation for the machine is included.

boring mills and machining centers / Vertical Processing Centers
21.08.2026
approved
dealer
item-No.: 162734466
New in: 1995

used

check
Location: Land-de

Table size: 1000 x 490 mm traverse path x/y/z: 800/510/500 mm spindle retainer: ISO 40 ISA kl. / gr. Table/spindle distance: 120/620 mm spindle speeds: 40-6000 rpm number of tool stations: 22 pieces feeds: x/y 1-3200 / z 1-2000 mm / min rapid traverse: x/y 1-3.2, z 1-2 m / min. Supply: 380 V, 19 kW space: 2850 x 2150 x 2600 mm weight: 3800 kg

boring mills and machining centers / Vertical Processing Centers
22.09.2026
approved
dealer
item-No.: 162743943
New in: 2000

used

check
Location: Land-de

CNC Vertical Machining Center "BRIDGEPORT VMC 800" With track control Heidenhain TNC 410 Year of Make: 2000 Travels: X 800 Y 500 Z 500 Speed range: 0 – 10,000 rpm infinitely variable With the following accessories: Rigid angle table 1000 mm x 500 mm clamping surface Vertical tool changer with 20 magazine positions ( SK 40 ) Full protection cabin with sliding doors and interior lighting Various tool holders SK 40 Electronic handwheel Coolant device with reinforced pump 20 bar Chip conveyor Operating instructions

boring mills and machining centers / Vertical Processing Centers
12.11.2026
approved
dealer
item-No.: 162746934
New in: 2018

used

check
Location: Land-cz

Inv. Num. : 9118 Type: XT 630 5AX Producer: Bridgeport Created: 2018 Parameters: Control system: Heidenhain TNC 640 Switch-on hours: 26283 h Hours: 13817 h Table diameter: 630 mm Number of axles: 5 pieces Maximum vertical spindle speed: 15000 1/min X-axis travel: 762 mm Y-axis travel: 630 mm Travel travel Z-axis: 610 mm Cone: BT40 Machine weight: 14600 kg

boring mills and machining centers / Vertical Processing Centers
03.11.2026
approved
dealer
item-No.: 162749181
New in: 2020

used

check
Location: Land-de

Control Brother C-00 Travel X/Y/Z: 650 x 400 x 435 mm 2-fold pallet changer 800 x 400 mm Spindle speed: 16,000 min-1 Tool magazine for 40 Wkz., BT 30 IKZ 70 bar 3D probe OMP 40 Electronic handwheel Chip conveyor

boring mills and machining centers / Vertical Processing Centers
12.11.2026
approved
dealer
item-No.: 162740044
New in: 1982

used

check
Location: Land-cz

Inv. Num. : 8729 Type: TC 215 Producer: Brother Generated: Parameters: Work table length: 500 mm Work table width: 220 mm Maximum table load (even): 75 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 300 mm Y-axis travel: 220 mm Travel Z-axis: 200 mm Number of all tools: 10 pieces Machine height: 1901 mm Machine length: 2430 mm Machine width: 1200 mm Machine weight: 1300 kg Equipment: Tool Holder

boring mills and machining centers / Vertical Processing Centers
20.07.2026
approved
dealer
item-No.: 162733822
New in: 1992

used

check
Location: Land-de

Table clamping surface: 2 x 350 x 300 mm traverse path x/y/z: 700/300/250 mm spindle retainer: BT 30 ISA kl. / gr. Table/spindle distance: 450 mm spindle speeds: 6-6000 rpm number of tool stations: 10 pieces feeds: 5-10000 mm / min rapid traverse: x & y/z 25/20 m / min spindle drive: 3,1/4,1 kW Electr. Supply: 400 V kW weight: 2600 kg

boring mills and machining centers / Vertical Processing Centers
21.08.2026
approved
dealer
item-No.: 162734921
New in: 1999

used

check
Location: Land-de

Table clamping area: 300 x 500 mm Travel x/y/z: 420/300/250 mm Spindle holder: BT 30 ISA small/gr. distance table/spindle: Spindle speeds: approx. 10 - 10000 rpm Feeds: approx. 5 - 10000 mm/min Rapid speed: x u. y/z 25/20 m/min Spindle drive: 7 kW electr. Connection: 400 V, approx. 9 kVA kW Space requirement: 2650 x 1400 x 2450 mm Weight: approx. 2800 kg

boring mills and machining centers / Vertical Processing Centers
12.11.2026
approved
dealer
item-No.: 162754302
New in: 2013

used

check
Location: Land-cz

Manufacturer: Brother Model No.: TC-32BN QT Year: 2013 Condition: Used Stock number: 9616 Work table length: 600 mm Work table width: 425 mm Maximum table load (uniform): 200 kg Maximum vertical spindle speed: 16000 1/min X-axis travel: 550 mm Y-axis travel: 400 mm Travel Z axis: 415 mm Number of all tools: 26 pieces Machine weight: 7000 kg Equipment: Chip conveyor NC Rotary Table Kitagawa CKR160RY

boring mills and machining centers / Vertical Processing Centers
01.04.2026
approved
dealer
item-No.: 162734399

used

check
Location: Land-it

FZ15KS HIGH SPEED 4 axis vertical machining center X: 550mm Y: 400mm Z: 360mm 4th axis original Peiseler CNC Siemens 840D Table surface 1050 x 450mm Toolchanger 48 posts ISO 40 Spindle speeds up to 12000 1/min with 4th axis Renishaw broken tool detector Coolant through spindle swarf conveyor Can be inspected under power in our warehouse. Mimu machine tools (Italy)

boring mills and machining centers / Vertical Processing Centers
12.11.2026
approved
dealer
item-No.: 162736257
New in: 2010

used

check
Location: Land-cz

Inv. Num. : 6148 Type: CFV 1300i Producer: Cincinnati Created: 2010 Parameters: Control system: Heidenhain iTNC 530 Hours: 59260 h Duty cycle: 26295 h Work table length: 1370 mm Work table width: 610 mm Tool magazine: 24 pieces Maximum vertical spindle speed: 9000 1/min X-axis travel: 1300 mm Y-axis travel: 540 mm Z-axis travel: 720 mm Cone: SK 40 Equipment: IKZ Conveyor New spindle 24x clamping tools 4x Hydro Vise

boring mills and machining centers / Vertical Processing Centers
12.11.2026
approved
dealer
item-No.: 162748297
New in: 2004

used

check
Location: Land-cz

Inv. Num. : 9243 Type: CFV 800 Producer: Cincinnati Generated: Parameters: Control system: Heidenhain iTNC 530 Work table length: 950 mm Work table width: 520 mm Maximum table load (uniform): 400 kg Maximum vertical spindle speed: 8000 1/min X-axis travel: 800 mm Y-axis travel: 540 mm Travel Z-axis: 560 mm

boring mills and machining centers / Vertical Processing Centers
12.11.2026
approved
dealer
item-No.: 162749239
New in: 2005

used

check
Location: Land-cz

Inv. Num. : 9328 Type: ACE VC 500 Producer: DAEWOO Created: 2005 Parameters: Control System: FANUC Series 21i-MB Work table length: 860 mm Work table width: 560 mm Maximum table load (even): 300 kg Spindle drive power: 15 kW Maximum vertical spindle speed: 8000 1/min X-axis travel: 760 mm Y-axis travel: 510 mm Travel Z axis: 570 mm

boring mills and machining centers / Vertical Processing Centers
06.10.2026
approved
dealer
item-No.: 162753047
New in: 1998

used

check
Location: Land-bg

Technical Specifications • CNC Control Unit: DIALOG 112 • Axis Travels (X, Y, Z): • X-axis: 1000 mm • Y-axis: 800 mm • Z-axis: 500 mm • Work Table: • Table dimensions: 1250 x 800 mm • Maximum table load: 1200 kg • Spindle: • Tool taper: SK 40 / HSK-A63 (depending on configuration) • Maximum spindle speed: 15,000 rpm (up to 18,000 rpm for hi-dyn versions) • Spindle drive power: approx. 10 / 15 kW • Tool Changer (ATC): • Magazine capacity: 30 positions (some variations have 60) • Max. tool weight: 12 kg

boring mills and machining centers / Vertical Processing Centers
12.10.2026
approved
dealer
item-No.: 162736649
New in: 2006

used

check
Location: Land-de

CNC Machining Center Vertical DECKEL-MAHO - DMC 635 V Built in 2006 in good condition. Control iTNC 530 Heidenhain Duty Cycle: 35172 Hours: 5903 Specifications: x-travel 635 mm y-travel 510 mm z-travel 460 mm Main Spindle: Speed range - main spindle 20 - 8,000 min/-1 Drive power - main spindle 13 / 9 kW Tool holder SK 40 DIN 69871 Max. torque 83 / 57 Nm Clamping force 8 kN Workbench: Table clamping surface 790 x 560 mm Number of T-slots 4 + 1 T-slots - spacing 100 mm T-slots - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg Table height above floor 720 mm Distance between spindle nose and table 120 - 580 mm Tool changer: Number of tool slots 20 pos. Max. tool width 80 / (130) mm max. tool length 250 mm max. tool weight 6.0 kg max. total weight 80 kg Tool - Tool change time 1.6 sec Changeover time span - span 6.0 sec Feeds: Rapid traverse 30 m/mi ...

boring mills and machining centers / Vertical Processing Centers
14.10.2026
approved
dealer
item-No.: 162753884
New in: 2005

used

check TOP SELLER
Location: Land-de

CNC Vertical Machining Center DECKEL MAHO DMC 104 V linear With track control Heidenhain iTNC 530 Year of Make: 2005 Travel: X 1040 Y 600 Z 500 Speed range: 0 – 12,000 rpm infinitely variable With the following accessories: Rigid angle table 850 mm x 600 mm clamping surface Vertical tool changer with 30 magazine positions ( SK 40 ) NC Dividing head with tailstock Electronic handwheel Full protection cabin with sliding doors and interior lighting Operating mode 3 + 4 IKZ 40 bar Chip conveyor Rotoclear Swarf Spray Gun Spiral chip auger Coolant Setup 3 Height Adjustable Machine Shoes Operating instructions

boring mills and machining centers / Vertical Processing Centers
22.09.2026
approved
dealer
item-No.: 162736869
New in: 2010

used

check
Location: Land-de

CNC Vertical Machining Center "DECKEL MAHO DMC 635 eco" With path control Siemens 810 Powerline Year of Make: 2010 Travel: X 635 Y 510 Z 460 Speed range: 20 – 8,000 rpm infinitely variable With the following accessories: Rigid angle table 790 mm x 560 mm clamping surface Vertical tool changer with 20 magazine positions Electronic handwheel Tool length measurement Heidenhain TT 140 Full protection cabin with sliding doors and interior lighting Coolant Setup Signal light 4 colour Conveyor Chip rinsing gun 3 Height Adjustable Machine Shoes Operating instructions

boring mills and machining centers / Vertical Processing Centers
30.10.2026
approved
dealer
item-No.: 162751864
New in: 2005

used

check
Location: Land-cz

The machine is in good technical condition; testing is possible by prior arrangement. A probe is included.

boring mills and machining centers / Vertical Processing Centers
30.10.2026
approved
dealer
item-No.: 162752540
New in: 2007

used

check
Location: Land-cz

The machine is in good technical condition; testing is possible by prior arrangement. Spindle speed: 12,000 rpm. Travel ranges: Z 510 mm, Y 510 mm, X 835 mm. Feed rate: 30 m/min. Tool holder: SK 40. Tool magazine capacity: 30 stations. Table load capacity: 800 kg. Table dimensions: 1000 x 560 mm. Overall dimensions including chip removal system: approx. 4300 x 2500 mm (footprint). Machine weight: approx. 4450 kg. Coolant system with belt filter unit, 20 bar. Maintenance/repair history: -Tool changer adjustment: 11/2025 -Coolant rail: 11/2024 -Coaxial valve, power chain: 10/2024 -X-axis ball screw replacement, new motor belt, new lubrication dispenser: 10/2024 -HDD: 7/2023 -X-axis cover plate: 2/2023 -Rotary union: 4/2022 -Gripper set: 5/2022 -Spindle braking resistor: 5/2022 -Spindle refurbishment by Vopss: 10/2020

boring mills and machining centers / Vertical Processing Centers
06.10.2026
approved
dealer
item-No.: 162753402
New in: 2016

used

check
Location: Land-de

CNC Vertical Machining Center DECKEL MAHO DMC 850 V With track control Heidenhain TNC 640 Year of Make: 2016 Travel: X 850 Y 520 Z 475 Speed range: 0 – 20,000 rpm infinitely variable With the following accessories: Rigid angle table 1160 mm x 575 mm clamping surface Vertical tool changer with 30 magazine positions ( HSK 63 ) 3 D Probe Heidenhain TS 649 Electronic handwheel LED light strip Polycarbonate Safety Lenses Full protection cabin with sliding doors and interior lighting Operating mode 3 + 4 Sealing air for linear measuring systems Spindle Oil Cooler Chip conveyor Chip flushing Swarf Spray Gun Coolant device (reinforced coolant pump) 4 Height Adjustable Machine Shoes Operating Instructions

boring mills and machining centers / Vertical Processing Centers
11.11.2026
approved
dealer
item-No.: 162755721
New in: 2018

used

check TOP SELLER
Location: Land-de

CNC Vertical Machining Center DECKEL MAHO DMF 260 / 7 NEW DMG Design With track control Heidenhain TNC 640 Year of manufacture: 2018 Travel: X 2600 Y 700 Z 700 Speed range: 20 – 20000 rpm infinitely variable ( SK 40 ) With the following accessories: Rigid angle table 2920 mm x 750 mm clamping surface With integrated NC rotary table 0 750 mm Controlled swivel milling head ( B axis ) Vertical tool changer with 60 magazine positions ( SK 40 ) Electronic handwheel 3D Probe Renishaw 2 x BLUM Laser A3 Operating mode 4 3 D Quick Set IKZ 40 bar Chip conveyor 2 x Rotoclear (rotating lens) Full protection cabin with sliding doors and interior lighting Partition wall Oil mist extraction Coolant Setup Control cabinet cooling unit RITTAL 4 Height Adjustable Machine Shoes Operating Instructions

boring mills and machining centers / Vertical Processing Centers
30.10.2026
approved
dealer
item-No.: 162751866
New in: 2008

used

check
Location: Land-cz

The machine is in good technical condition; it can be tested by prior arrangement.

boring mills and machining centers / Vertical Processing Centers
22.09.2026
approved
dealer
item-No.: 162752155
New in: 2022

used

check
Location: Land-de

CNC Vertical Machining Center "DECKEL MAHO M 1" With rail control Siemens 828 D Shop Mill Year of construction: 2022 Commissioning: 9/2023 Travel: X 550 Y 550 Z 510 Speed range: 20 – 12,000 rpm infinitely variable With the following accessories: Rigid angle table 850 mm x 650 mm clamping surface Vertical tool changer with 24 magazine positions ( SK 40 ) IKZ 20 bar Electronic handwheel 3 D Probe Renishaw PP 40 Tool Length Measurement Renishaw TS27R Full protection cabin with sliding doors and interior lighting Coolant Setup Chip conveyor Oil mist extraction Coolant spray gun 3 Height Adjustable Machine Shoes Operating Instructions THE MACHINE IS IN TOP CONDITION!

boring mills and machining centers / Vertical Processing Centers
22.06.2026
approved
dealer
item-No.: 162736653
New in: 2011

used

check
Location: Land-de

Control Heidenhain TNC 620 Travel X/Y/Z: 1035/560/510 mm, Spindle speed: 12,000 min-1, Tool magazine for 30 Wkz., SK 40, Cooling by the spindle 12 bar, Conveyor

boring mills and machining centers / Vertical Processing Centers
03.11.2026
approved
dealer
item-No.: 162748596
New in: 2006

used

check
Location: Land-de

Control Heidenhain iTNC 530 Travel X/Y/Z: 2200 x 560 x 720 mm Spindle speed 18,000 min-1 Clamping area 2600 x 600 mm Max. table load 2200 kg Swivel head IKZ 25 bar Tool magazine for 30 Wkz, SK 40 Choice of C- or A-axis Measuring Probe Heidenhain TS 640 Chip conveyor Paper Belt Filter

boring mills and machining centers / Vertical Processing Centers
30.07.2026
item-No.: 162749835

used

Location: Land-es

Manufacturer DMG Model DMC 100U duoBlock® Year 2007 CNC control HEIDENHAIN iTNC 530 Routes and advances Strokes (X/Y/Z) 1,000/1,000/1,000 mm. Fast forward axes (X/Y/Z) 60,000 mm./min. Max. working advance axes (X/Y/Z) 10,000 mm./min. NC rotary table Pallet changer for 2 pallets INCLUDED 2 Pallets INCLUDED Quick change system INCLUDED Pallet dimensions 1,000x800mm Maximum weight on pallet changer 1500 kg Table rotation (C-axis) 0.001º (Continuous) Table rotation speed 10.3 r.p.m. Head Horizontal Automatic Swivel Head / Vertical (A-axis) 0.001º (continuous) Head Cone HSK 63 Main Motor Power 26.9 kW Engine revolutions 24,000 rpm Automatic Tool Loader Type Loader Tools Horizontal Chain Tool warehouse positions. 120 Additional equipment Internal Cooling 80 Bar INCLUDED Compact cooling system INCLUDED Coolant tank with paper filer INCLUDED Chip Evacuator IN ...

boring mills and machining centers / Vertical Processing Centers
21.07.2026
item-No.: 162743005

used

Location: Land-es

boring mills and machining centers / Vertical Processing Centers
23.10.2026
item-No.: 162754336

used

Location: Land-es

Manufacturer DMG Model DMU 160P Year 2002 CNC HEIDENHAIN iTNC-530 Table Dimensions of the Work Table 1,500 x 1,250 mm. Maximum weight allowed on table 4,000 kg. Table Rotation (C-Axis) 0.001º (Continuous) Routes and advances Longitudinal course (X-axis) 1,600 mm. Cross Span (Y-Axis) 1,250 mm Vertical course (Z Axis) 1,000 mm. Horizontal Automatic Swivel Head / Vertical (A-axis) 0.001º (continuous) Fast Axis Feed 60,000 mm/min SK-40 Spindle Cone DIN 69871 Speed range 20-18,000 rpm Main Motor Power 28 kW Equipment Automatic tool loader INCLUDED Positions in tool loader 60 Coolant tank capacity 200 l. HEIDENHAIN optical rulers INCLUDED Chip conveyor INCLUDED HEIDENHAIN HR-410 Portable Steering Wheel 3D-Rot INCLUDED Measuring probe piece HEIDENHAIN TS-631 M function for coolant Internal/external INCLUDED Prepared for internal cooling INCLUDED Mode 4 op ...

boring mills and machining centers / Vertical Processing Centers
12.11.2026
approved
dealer
item-No.: 162750870
New in: 2011

used

check
Location: Land-cz

Manufacturer: DOOSAN Model: DNM 400 A Year: 2011 Condition: Used Stock number: 9438 Control system: FANUC Work table length: 920 mm Work table width: 435 mm Maximum table load (uniform): 600 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 435 mm Travel Z-axis: 510 mm Machine height: 2509 mm Machine length: 2093 mm Machine width: 1962 mm Machine weight: 5000 kg

boring mills and machining centers / Vertical Processing Centers
30.10.2026
approved
dealer
item-No.: 162752544
New in: 2012

used

check
Location: Land-cz

The machine is in good technical condition and available for testing by prior arrangement. It features a FANUC i control system, cast-iron construction, linear guideways, X/Y/Z axis travels of 1270/670/625 mm, a 1300 x 670 mm table with T-slots, a table load capacity of 1000 kg, and a 30-position tool changer. Extensive accessories included: 4th axis (rotary table), hydraulic vise, RENISHAW tool and workpiece probes, oil skimmer, 3-color signal light, belt-type chip conveyor, Filtermist 6002 mist collector, tool holders, etc.

boring mills and machining centers / Vertical Processing Centers
12.11.2026
approved
dealer
item-No.: 162742199
New in: 2011

used

check
Location: Land-cz

Inv. Num. : 8871 Type: Emcomill E 1200 Producer: EMCO Created: 2011 Parameters: Control system: Fanuc Switch-on hours: 28317 h Operating hours: 12114 h Work table length: 1340 mm Work table width: 650 mm Maximum table load (uniform): 1500 kg X-axis travel: 1200 mm Y-axis travel: 610 mm Travel Z axis: 500 mm Machine height: 3060 mm Machine length: 3200 mm Machine width: 3350 mm Machine weight: 10000 kg 2025: New Z-axis motor Spindle overhaul

boring mills and machining centers / Vertical Processing Centers
30.10.2026
approved
dealer
item-No.: 162754936
New in: 2017

used

check
Location: Land-cz

The machine is in good technical condition; testing is possible by prior arrangement. In our facility, the machine was used exclusively for machining graphite electrodes.

boring mills and machining centers / Vertical Processing Centers
03.11.2026
approved
dealer
item-No.: 162748358
New in: 1998

used

check
Location: Land-de

Control Fanuc OM Travel distances X/Y/Z: 450 x 300 x 400 mm Table size 600 x 300 mm Spindle speed 8,000 min-1 Tool magazine for 16 Wkzg. SK 30

boring mills and machining centers / Vertical Processing Centers
12.11.2026
approved
dealer
item-No.: 162749749
New in: 2008

used

check
Location: Land-cz

Manufacturer. FANUC Model: Robodrill 4AX Year: 2008 Condition: Used Stock number: 9359 Number of axes: 4 pieces Maximum vertical spindle speed: 24000 1/min X-axis travel: 700 mm Y-axis travel: 400 mm Travel travel Z-axis: 330 mm Workpiece diameter: 300 mm Machine weight: 2100 kg

boring mills and machining centers / Vertical Processing Centers
12.11.2026
approved
dealer
item-No.: 162736660
New in: 2007

used

check
Location: Land-cz

Nv. Num. : 7401 Type: QM-40 SA Producer: Feller Created: 2007 Parameters: Control system: FANUC Maximum spindle speed: 20,000 1/min Number of axles: 3 X-axis travel: 1000 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Number of stacking positions: 24 pieces Machine weight: 6300 kg Equipment: BLUM 3D Workpiece Probe 2022/11: GO Interchangeable Arms Spindle change 2021: Installation of the BLUM workpiece probe 2020: Replacement of drive bearings and bolts on X/Y beams Replacement of caliper lubrication dispensers, new brake caliper covers Replacement of the spindle center cooling reducer

boring mills and machining centers / Vertical Processing Centers
12.11.2026
approved
dealer
item-No.: 162751670
New in: 2008

used

check
Location: Land-cz

Manufacturer: FERMAT Model: VMF 1000 CNC Year: 2008 Condition: Used Stock number: 9494 Control System: FANUC Series Oi-MC Switch-on hours: 25998 h Work table length: 1300 mm Work table width: 600 mm Spindle drive power: 15 kW Speed: 10000 1/min X-axis travel: 1006 mm Y-axis travel: 598 mm Z-axis travel: 600 mm Machine weight: 5000 kg

boring mills and machining centers / Vertical Processing Centers
12.11.2026
approved
dealer
item-No.: 162741436
New in: 2006

used

check
Location: Land-cz

Inv. Num. : 8854 Type: MINIMILL HE Producer: HAAS Created: 2006 Parameters: Control system: HAAS Work table length: 914 mm Work table width: 305 mm Maximum table load (uniform): 227 kg Spindle drive power: 7.5 kW Maximum vertical spindle speed: 6000 1/min X-axis travel: 406 mm Y-axis travel: 326 mm Z-axis travel: 381 mm Cone: ISO 40 Number of all tools: 10 pieces Machine height: 2565 mm Machine length: 2119 mm Machine width: 2077 mm Machine weight: 2018 kg

boring mills and machining centers / Vertical Processing Centers
30.10.2026
approved
dealer
item-No.: 162747855
New in: 2022

used

check
Location: Land-cz

The machine is in good technical condition, after prior agreement it is possible to test it. 25 micron filter, chip conveyor belt, cooling through the spindle center, pressure 300 psi, wireless probe for tools and workpieces, side tool changer, ISO 40 taper, 30+1 tools, synchronized thread cutting, rotary gauge, 1x clamping vice, 20x tool holders

boring mills and machining centers / Vertical Processing Centers
12.11.2026
approved
dealer
item-No.: 162745148
New in: 2001

used

check
Location: Land-cz

Inv. Num. : 9047 Type: VF 0 Producer: HAAS Created: 2001 Parameters: Work table length: 660 mm Work table width: 356 mm Maximum table load (uniform): 1361 kg Maximum vertical spindle speed: 7500 1/min X-axis travel: 508 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Machine weight: 3630 kg

boring mills and machining centers / Vertical Processing Centers
30.10.2026
approved
dealer
item-No.: 162753181
New in: 2005

used

check
Location: Land-cz

The machine is in good technical condition; it can be tested by prior arrangement.

boring mills and machining centers / Vertical Processing Centers
12.11.2026
approved
dealer
item-No.: 162750875
New in: 2012

used

check
Location: Land-cz

Manufacturer: HAAS Model: VF 2SS Year: 2012 Condition: Used Stock number: 9440 Control system: HAAS Work table length: 914 mm Work table width: 356 mm Maximum table load (uniform): 680 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Machine weight: 3539 kg Equipment: 4. Axis

boring mills and machining centers / Vertical Processing Centers
12.11.2026
approved
dealer
item-No.: 162750880
New in: 2013

used

check
Location: Land-cz

Manufacturer: HAAS Model: VF 2SS Year: 2013 Condition: Used Stock number: 9441 Control system: HAAS Work table length: 914 mm Work table width: 356 mm Maximum table load (uniform): 680 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Machine weight: 3539 kg Equipment: 2x double 4th axle

boring mills and machining centers / Vertical Processing Centers
12.11.2026
approved
dealer
item-No.: 162750883
New in: 2014

used

check
Location: Land-cz

Manufacturer: HAAS Model: VF 2SS Year: 2014 Condition: Used Stock number: 9442 Control system: HAAS Work table length: 914 mm Work table width: 356 mm Maximum table load (uniform): 680 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Machine weight: 3539 kg Equipment: 4. Axis

boring mills and machining centers / Vertical Processing Centers
12.11.2026
approved
dealer
item-No.: 162750731
New in: 2007

used

check
Location: Land-cz

Manufacturer: HAAS Model: VF 2SS HE Year: 2007 Condition: Used Stock number: 9426 Work table length: 914 mm Work table width: 356 mm Maximum table load (uniform): 1361 kg Tool magazine: 24 pieces Maximum vertical spindle speed: 8000 1/min X-axis travel: 762 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Cone: ISO 40 Equipment: Pallet system

boring mills and machining centers / Vertical Processing Centers
30.10.2026
approved
dealer
item-No.: 162750023
New in: 2012

used

check
Location: Land-cz

The machine is in good technical condition; testing is possible by prior arrangement. It includes equipment and, where applicable, accessories (holders, tools, etc.). Complete, verifiable service history.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE since 1996