5-axis simultaneous, X / Y / Z 750 mm / 600 mm / 520 mm, Heidenhain iTNC 530, 18,000 rpm. SK40, IKZ, 120 pos. Tool changer, touch probe

Inv. Num. : 5211 Type: DMU 80 P Producer: Deckel Maho Generated: 2000 Parameters: Control system: Heidenhein TNC 430 Switch-on hours: 87285 h Hours: 34100 h Minimum vertical spindle speed: 20 1/min Maximum vertical spindle speed: 12000 1/min X-axis travel: 800 mm Y-axis travel: 650 mm Z-axis travel: 550 mm Cone: ISO 40 Number of all tools: 30 pieces Equipment: IKZ Workpiece Probe Conveyor Spindle cooling 2020: Replacement of the PILS contactors New E/R module New X/Y Module 2019: Lock Replacement Workpiece Probe Sensor Replacement Replacing the hydraulic hose of the tool clamp 2018: New X/Y axle bolt Replacement of the Y-axis blind Replacement of the B-axis planetary gearbox New motor and B-axis measuring cable 2016: New spindle bearings System Replacement Replacing the UV105 power supply Replacement of the spindle mod ...

Control Heidenhain 426 Travel X/Y/Z: 500 x 380 x 380 mm Clamping area 500 x 400 mm Tool magazine for 24 Wkz., SK 40 Speed 15,000 min-1 NC rotary and swivel table

Control Heidenhain Mill-Plus Travel X/Y/Z: 500 x 380 x 380 mm Clamping area 500 x 400 mm Tool magazine for 24 Wkz., SK 40 Speed 8,000 rpm NC rotary and swivel table Conveyor

x-travel: 800 mmy-travel: 700 mmz-travel: 600 mmturning speeds: 12000 1 U/min: control: Heidenhain total power requirement: 59 kWweight of the machine ca.: 10,6 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8183 Type: DMU 100T Producer: DMG Created: 2001 Parameters: Control system: HEIDENHAIN Work table length: 1500 mm Work table width: 795 mm Speed: 10000 1/min X-axis travel: 1080 mm Y-axis travel: 710 mm Z-axis travel: 710 mm Machine weight: 9700 kg

Inv. Num. : 8243 Type: DMU 60 P Producer: DMG Generated: Parameters: Work table length: 1000 mm Work table width: 600 mm Number of axles: 5 pieces X-axis travel: 600 mm Y-axis travel: 525 mm Travel Z axis: 500 mm Speed: 12000 1/min Machine weight: 4000 kg

5-axis simultaneous, New spindle 2018, X / Y / Z 750 mm / 600 mm / 520 mm, Heidenhain iTNC 530, 18,000 rpm. SK40, IKZ, 120 pos. Tool changer, touch probe

x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmControl: SIEMENS 840D table - swivable +/-: +110 / -5 °-C-axis table rotating: 360° tool piece magazine with: 16 Werkzeugplätzen weight of the machine ca.: 3.9 tdimensions of the machine ca.: 2.9 x 2.0 x 2.5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8444 Type: UMC 500 Producer: HAAS Created: 2021 Parameters: Control system: HAAS Switch-on hours: 3043 h Table diameter: 400 mm Maximum table load (even): 226 kg Spindle drive power: 22.4 kW X-axis travel: 610 mm Y-axis travel: 406 mm Travel Z-axis: 406 mm Speed: 10000 1/min Maximum feed speed axis X: 16.5 m/min Maximum feed speed axis Y: 16.5 m/min Maximum feed speed axis Z: 16.5 m/min Cone: ISO 40 Number of all tools: 30 pieces Rapid traverse X/Y/Z: 22.9 m/min Machine weight: 5400 kg Equipment: Conveyor Renishaw workpiece probe Tool Holder Tools Renishaw tool probe Wi-Fi camera in the machine working room

x-travel: 762 mmy-travel: 508 mmz-travel: 508 mmB-axis (table): +120/-35 Gradc-axis: 360 Gradcontrol: HAAS für 5 Achsentool piece magazine with: 40 Plätzennumber of spindle speeds: 12000 U/mindimensions of the machine ca.: 4.3 x 2.35 x 2.8 mweight of the machine ca.: 8.5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8298 Type: UMC 750 Producer: HAAS Created: 2020 Parameters: Control system: HAAS Switch-on hours: 7037 h Hours: 5222 h Table diameter: 500 mm Maximum table load (even): 300 kg Spindle drive power: 22.4 kW Number of axles: 5 pieces Maximum spindle speed: 8100 1/min X-axis travel: 762 mm Y-axis travel: 508 mm Travel Z-axis: 508 mm Max. tool diameter: 127 mm Max. tool length: 305 mm Max. tool weight: 5.4 kg Number of Stack Positions: 30 1 Axis C: 360 st

x-travel: 762 mmy-travel: 508 mmz-travel: 508 mmB-axis (table): +120/-35 Gradc-axis: 360 Gradcontrol: HAAS für 5 Achsentool piece magazine with: 40 Plätzennumber of spindle speeds: 12000 U/mindimensions of the machine ca.: 4.3 x 2.35 x 2.8 mweight of the machine ca.: 8.5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heidenhain TNC 430, 12,000 rpm SK40, touch probe, extractor, chip conveyor, electronic handwheel. XYZ= 800x600x500 mm. Clamping devices not included.

Inv. Num. : 8434 Type: BX900T Producer: Pinnacle Created: 2019 Parameters: Control system: Heidenhain TNC 640 Switch-on hours: 13002 h Hours: 9507 h Work table length: 1700 mm Work table width: 850 mm Maximum table load (uniform): 1200 kg Speed: 15000 1/min X-axis travel: 1500 mm Y-axis travel: 900 mm Travel distances Z-axis: 1100 mm Max. machining diameter: 800 mm Number of Stacking Positions: 60 pieces Machine weight: 17000 kg Equipment: Vises (2 pieces) Heidenhain Tool Probe Workpiece probes Heidenhain VERO clamping (Schunk brand) Clamps (approx. 79 pcs.)

Inv. Num. : 8227 Type: U-620 Producer: Spinner Created: 2011 Parameters: Control system: Siemens Number of axles: 5 pieces X-axis travel: 620 mm Y-axis travel: 520 mm Travel travel Z-axis: 460 mm Maximum vertical spindle speed: 10000 1/min

Inv. Num. : 8225 Type: U5-1520 Producer: Spinner Created: 2012 Parameters: Control system: Siemens Work table length: 820 mm Work table width: 540 mm Number of axles: 5 pieces Speed: 12000 1/min X-axis travel: 1520 mm Y-axis travel: 520 mm Travel travel Z-axis: 460 mm Table diameter: 560 mm