Machine make / type HELLER / H 8000 Hours: 5800 Year of Make: 2020 Control: Siemens 840D SL Spindle: EPC unit (8,000 1/min, 60 kW, 1146 Nm) Tool clamping system: SK 50 Magazine / Places: Shelf / 265 Rotary table: 360,000° x 0.001° Coolant system: KNOLL, KF 600, IKZ 70 bar, (working area flushing) Working range XYZ (mm): 1250 / 1200 / 1100 Pallet size (mm): 800 X 800 Workpiece clamping: mechanical Additional options / special features: Holder for MSK attachment heads; Wireless probes Receiver (RENISHAW); Fast drill breakage control (SBBK); Interface suction; Windshield blowing device for service doors; Tool coding; Running control Conveyor; Integrated tool & tool Collision monitoring; 3 colors status lamp; Increased Tool weight 35kg; Scraper belt conveyor for Wet machining; coolant temperature controller; Feed force indicator; Tangential control;

Vertical machining center in good condition, Can be viewed under powe rupon appointment, Available for immediate purchase, Spindel hours: 3188h, Including:, Helical chip removal, Fast tool changer, Cooling through the spindle, High pressure pump 15 bar + fine filtering 125 micron, connection for measuring probe (probe not included), Full technical specifications in the attached pictures., CNC control: Heidenhain TNC 426, X-travel: 760 mm, Y-travel: 410 mm, Z-Travel: 410 mm, Table size: 890 x 400 mm, Table height: 780 mm, Max table load: 300 kg, Max spindle speed: 10000 rpm, Automatic tool changer: BT40, Tool capacity: 30, Max tool diameter: 80 mm, Max tool length: 250 mm, Machine dimensions (L/W/H/W): 2250mm/ 2100mm/ 2368mm/ 4500 kg, Spindel hours: 3188h

Control: Siemens 840D PL Spindle: 7,000 rpm (43 kW/ 822 Nm) Tool clamping system: HSK 100 Cyorjbwuiw Magazine / Places: Chain / 50 Seats Rotary table: 360,000° x 0.001° Coolant system: KNOLL, VRF 250, IKZ 50 bar, (working area flushing) Working range XYZ (mm): 1250 / 1000 / 1000 Pallet size (mm): 800 X 800 Workpiece clamping: mechanical Additional options: Infrared receiver for measuring probe (BLUM); Multi-spindle head mounting; Fast drill breakage control (SBBK); Codechip WZ; Runtime and quantity recording; IPM; Windshield blow-off device for service door; evasion strategy; Tool planning with MCIS TDI

Opportunity to purchase a Hurco VM30i 4-axis Vertical Machining Center., This machine is in excellent condition and is available to purchase immediately., Viewing under power available by appointment only., Included:, Hurco 4th Axis, Tooling, Vice, Hurco Trolley, Many software extras, Twin screen option, X axis Travel: 1,270mm, Y axis Travel: 508mm, Z axis Travel: 508mm, T-Slot Size: 5 x 18mm, Max weight on table: 1,800kg, Table surface area: 1321 x 508 mm, Spindle nose to table: 102mm, Max Spindle Speed: 12,000 RPM, Spindle Power: 15 kW, Tool Type: CAT/BT 40, Number of tools: 24, Max tool diameter: 80mm, Max tool length: 250mm, Max tool weight: 7 kg, Rapid traverse: 28 m/min, Weight: 4,320kg, Footprint: 4,086 mm X 3,312 mm x 2,543 mm (L x W x H)

DUGARD EAGLE 1000 VMC CNC vertical machining center was built in 2000 in Taiwan by C Dugard Ltd. The machine is used for precision machining of workpieces with a maximum weight of 600 kg. The machining process is performed by means of reliable components that offer the highest quality of manufactured parts for many years of use. Inside the large workspace there is among others a large work table with a length of 1200 mm and a width of 450 mm, a powerful spindle and a 20-position tool magazine. The DUGARD EAGLE 1000 CNC machining center weighs 5800 kg. Technical specifications of the DUGARD EAGLE 1000 VMC CNC milling machine - CNC control: SIEMENS - feed in the X/Y/Z axis: 1020/510/510 mm - feed rate in the X,Y,Z axis: 1-7600 mm/min - rapid traverse in the X/Y/Z axis: 30/30/18 m/min - work table dimensions (L x W): 1200 x 450 mm - maximum workpiece weight: 600 kg - maximum spind ...

Haas VF11/40 Vertical Machining Center was installed new in February 2021 and is available immediately., Haas Flagship Model, High Powered Direct Drive Spindle, Excellent condition with Low Spindle Hours, Options Include Renishaw Probe System, Through spindle coolant, Haas HRT450 Fourth Axis, Twin FX7002 Filtermist Units and Powered Doors., All viewings are by appointment only., LOCATION: Leicester (UK), Immediately available., Max Spindle RPM: 8,100rpm, Tool Capacity: 30 (+1), X axis Travel: 3048mm, Y axis Travel: 1016mm, Z axis Travel: 762mm, Table Length: 3048mm, Table Width: 711mm, Spindle Taper: BT40, T-Slot Width: 16mm, T-Slot Center Distance: 125mm, Dimensions: 732 x 305 x 334 cm, Spindle nose to table (max): 864 mm, Spindle nose to table (min): 102 mm

HAAS VF-1 CNC machining center was built in 2015 in the United States by HAAS AUTOMATION, INC. The machine, designed for unit and small batch production, is the ideal choice for any tool workshop. All this is due to the use of a number of modern components with excellent technical parameters, which guarantee high reliability and precise machining. Workpieces weighing a maximum of 1361 kg are machined inside a large, fully illuminated work area by means of a high-speed spindle and tools taken from a 20-position magazine. The machining process is free of vibration or oscillation, thanks to an extremely stable design made from top-quality steel. All this is complemented by an intelligent CNC control with an intuitive interface. The HAAS VF1 milling center weighs 3539 kg. It is also possible to purchase additional tooling shown in the photos (tool holders, vices, TSCHORN 3D tester, measur ...

Vertical machining center equipped with glass scales, suitable for high precision machining., In very good condition with only 7200 spindle hours., Available for immediate purchase and delivery., Possibility to inspect the machine under power upon appointment., Please note:, The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection., X-travel: 635 mm, Y-travel: 510 mm, Z-travel: 460 mm, Table surface area: 790 x 560 mm, Cnc Control: iTNC530 Heidenhain, Max spindle speed: 14000 rpm, Rapid trav ...

FEHLMANN PICOMAX 60-M CNC vertical machining center was built in 2006 in Switzerland by FEHLMANN AG. The machine is designed for even the most intensive machining of workpieces with a maximum weight of 300 kg. The machining process is performed inside a large workspace, equipped with, among others, a reliable high-speed spindle and a 24-position tool magazine. Daily work, on the other hand, is facilitated by the installed HEIDENHAIN CNC control, in which advanced machining programmes are created in just a few steps. The PICOMAX 60 M CNC machining center will satisfy even the most demanding customers thanks to its excellent performance and high machining precision. The total weight of the machine is 3350 kg. Technical specifications of the FEHLMANN PICOMAX 60-M CNC milling machine - CNC controller: HEIDENHAIN iTNC 530 - feed in the X/Y/Z axis: 505/355/610 mm - feed rate in the X,Y,Z ...

Vertical CNC Machining Center in very good condition., Only 3523 cutting hours., Serviced by Mazak professionals., This machine is immediately available and viewing is possible upon appointment., CNC control: Mazatrol PC Fusion CNC 640 M Nexus, Table Size (Clamping Surface): 550 x 1300 mm, Maximum Table Load: 1200 kg, Number of T-Slots: 5, T-Slot Spacing: 100 mm, Slot Width: 18 mm, Distance from Spindle Nose to Table: 150 – 660 mm, Travel Paths X/Y/Z: 1050 x 510 x 510 mm, Rapid Traverse: 36000 mm/min, Spindle speed Range: 40 – 12,000 rpm, Cutting feed Rate: 1 – 8,000 mm/min, Tool shank: MAS BT-40, Tool positions: 30, Max. tool diameter: 80 mm, Max. tool length: 350 mm, Max. tool weight: 8 kg, Chip conveyor: yes, Machine dimensions L/W/H: 2880 x 2.835 x 2.783 m, Machine weight: 6900 kg

CHIRON FZ 18 KL CNC vertical machining center was built in 2000 in Germany by CHIRON Werke GmbH & Co. KG. The machine is used for precise, multi-axis machining of workpieces with complex geometries. For this task, the work space has been equipped with reliable components in the form of, among others, a hydraulically clamped spindle and a 40-position tool magazine. In addition, in order to ensure excellent movement dynamics, all linear axes (X,Y,Z) are driven by a high-performance servomotor with HFUC 50-100 harmonic transmission. The CHIRON FZ 18K L HIGH SPEED CNC machining center is offered with a wide range of equipment, including e.g. a 4th axis that is fully integrated into the numerical control and operated via M-codes. The total weight of the machine is 10000 kg. Technical specifications of the CHIRON FZ 18 KL milling center - feed in the X/Y/Z axis: 2000/520/630 mm - maximum  ...

CINCINNATI ARROW 1250 CNC vertical machining center was built in 2001 in the United Kingdom by CINCINNATI MACHINE U.K. LIMITED. The machine, distinguished by its high reliability, productivity and precision, is used for the economic machining of workpieces. The machining process is performed inside a large work space, equipped with, among others, a 21-position tool magazine and a high-speed spindle. Its high-quality design eliminates any vibrations generated during milling, guaranteeing the highest possible stability during even the most intensive challenges. The offered CINCINNATI ARROW 2 1250 CNC machining center has undergone regular maintenance and servicing. The machine is after an spindle overhaul and the replacement of guides and screws in the X and Y axes. The total weight of the machine is 6000 kg. Technical specifications of the CINCINNATI ARROW 1250 CNC milling machine - C ...

DOOSAN DNM 4500 CNC machining center was built in 2022 (purchased as new in 2023) in South Korea by DN SOLUTIONS. The machine, designed for precision machining of workpieces with a maximum weight of 600 kg, is equipped with a number of reliable components that ensure uninterrupted operation for many years of intensive production. The machining processes, i.e. drilling, threading and milling, are performed inside a large work area by means of cutting tools and a powerful spindle with direct drive. All this is complemented by the intelligent SIEMENS CNC controller, in which advanced machining programmes are created in just a few steps. Throughout its entire service life, the machine has worked for just 83 hours. The DOOSAN milling center weighs 5000 kg. Technical specifications of the DOOSAN DNM 4500 CNC milling machine - CNC controller: SIEMENS SINUMERIK 828D - feed in the X/Y/Z axis ...

OKUMA MA-600HII CNC machining center was built in 2012 by the Japanese brand OKUMA Corporation. This highly efficient machine is used for advanced workpiece machining in 4 axes. The machining process is performed fully automatically inside a large working area by means of precision cutting tools and a reliable high-speed spindle. The automatic pallet changing system allows workpieces to be loaded and unloaded simultaneously during machining, reducing machine downtime to a minimum. The extensive equipment also includes, among others, a capacious tool magazine and an intelligent CNC controller with an intuitive interface. The MA-600HII CNC horizontal machining center weighs 24500 kg. Technical specifications of the OKUMA MA-600HII CNC milling machine - CNC controller: OSP-P300MA - number of axes: 4 (X,Y,Z,B) - feed in the X/Y/Z axis: 1000/900/1000 mm - rapid traverse in the X,Y,Z ax ...

KITAMURA MYCENTER HX630G CNC machining center was built in 2017 by the Japanese brand Kitamura Machinery Co., Ltd. The machine, designed for precision machining of workpieces with a maximum weight of 1500 kg, was created as a response to the needs of modern business. In order to meet all production requirements, state-of-the-art technical solutions, combined with extensive equipment, guarantee excellent repeatability of the manufactured parts over many years of intensive operation. The machining process is performed fully automatically inside a large working area, which includes a capacious tool magazine and a reliable spindle with a special DCS (Dual Contact Spindle) system. This system ensures optimum spindle rigidity through simultaneous contact between the taper and the flange. Furthermore, the automatic pallet exchange system allows workpieces to be loaded and unloaded simultaneo ...

MATEC 30 HV CNC machining center was built in 2001 in Germany by Matec Maschinenbau GmbH. The machine, designed for precision machining of oversized workpieces, is equipped with a number of reliable components with excellent specifications. This includes a tilting work head, a 24-position tool magazine and a chip extraction unit. All this is complemented by the intelligent BOSCH CNC control, in which advanced machining programmes are created in just a few steps. The MATEC CNC vertical machining center weighs approximately 15000 kg. Technical specifications of the MATEC 30 HV CNC milling machine - CNC controller: BOSCH TYP 3 OSA - feed in the X/Y/Z axis: 3000/600/800 mm - maximum spindle rotational speed: 9000 rpm - minimum spindle rotational speed: 20 rpm - spindle drive power: 16 kW - tilting work head - rotation angle of work head: ± 90° every 1° - 24-position tool magazi ...

AVIA X-5 1250/630 CNC vertical machining center was built in 2015 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A. The machine is used for, among others, precision milling, drilling and threading of workpieces with complex geometries in 5 axes. All these machining operations are performed by a high-speed electro-spindle located on a tilting working head. The tilting head, in turn, offers the possibility to use shorter tools and select the optimum cutting angle. The AVIA X-5 5-axis CNC machining center is offered with an extensive range of equipment, including a rotary table, measuring probes and a intelligent HEIDENHAIN CNC controller. The total weight of the machine is 10000 kg. Technical specifications of the AVIA X-5 1250/630 CNC milling machine - number of axes: 5 (X,Y,Z,B,C) - feed in the X/Y/Z axis: 1250/700/725 mm - B axis rotation range: -110°/+45° - C axis rota ...

BRIDGEPORT VMC 600/22 Digital CNC machining center was built in 2000 by the English brand Bridgeport Machines Inc. The machine, equipped with among others 4th axis and a 22-position magazine, is used for precision machining of workpieces with a maximum weight of 500 kg. The machining process is performed by a reliable spindle with an optimised speed range, which is driven by a powerful motor. This power allows full utilisation of the cutting tools in any, even the most intensive, production process. All this is complemented by the HEIDENHAIN CNC control, which allows advanced programmes to be created in just a few steps. The BRIDGEPORT CNC vertical machining center weighs 2500 kg. Technical data of the BRIDGEPORT VMC 600/22 Digital CNC milling machine - CNC controller: HEIDENHAIN TNC 426PB - feed in the X/Y/Z axis: 600/410/520 mm - rapid traverse in the X/Y/Z axis: 40/40/20 m/min  ...

DECKEL MAHO DMC 103 V CNC machining center was built in 1999 in Germany by DECKEL MAHO GmbH. The machine designed for efficient 3-axis machining of workpieces is an excellent choice for any industrial plant. The machining process is performed inside a fully illuminated workspace using reliable cutting tools and a high-speed spindle. The design of the machine perfectly dampens any vibrations and oscillations generated during machining, guaranteeing maximum stability during even the most intense challenges. All of this is complemented by the intuitive SIEMENS CNC control, which allows advanced programmes to be created in just a few steps. The offered DECKEL MAHO CNC vertical machining center has worked 20938 hours to date. Technical specifications of the DECKEL MAHO DMC 103 V CNC milling machine - CNC controller: SIEMENS SINUMERIK 810D - number of axes: 3 - feed in the X/Y/Z axis: 10 ...

DMG MORI CMX 70 U CNC machining center was built in 2018 in Poland by FAMOT Pleszew Sp. z o.o.. The machine, designed for precision five-axis workpiece machining, is distinguished by the use of reliable components and modern technical solutions. Supported at 4 points, the cast mineral bed, perfectly dampens any vibrations while ensuring proper heat extraction from the workspace. Inside the machine’s large, fully illuminated workspace, there is, among others, a tilting rotary table, a 30-position tool magazine and a reliable spindle with an optimum speed range. In turn, the linear axes (X,Y,Z) use a direct measuring system in the form of measuring scales to achieve the best accuracy and repeatability. All this is complemented by a touchscreen operator panel with intuitive SIEMENS CNC control. All these technical solutions, combined with the extensive range of equipment, guarantee uninte ...

AVIA VMC 1000 CNC machining center was built in 2017 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A.. The machine, distinguished by its extensive machining capabilities and state-of-the-art technical solutions, will meet any, even the most demanding challenges. Workpieces with a maximum weight of 1000 kg are machined by an extremely fast spindle with thermo-stabilisation, which, combined with precision cutting tools, guarantees excellent milling results. On the other hand, the machine’s high-quality construction with sliding doors offers maximum stability in machining by effectively eliminating any vibrations generated during milling. The AVIA CNC vertical machining center is offered with an extensive range of equipment, including toolholders, digital axis servo drives and the intuitive SIEMENS numerical control with ShopMill 3D overlay. The total weight of the machine is 5300 k ...

DECKEL MAHO DMU 60P CNC machining center was built in 1999 in Germany by DECKEL MAHO GmbH. The machine with its extremely sturdy construction was designed for the most intensive 5-axis workpiece machining. Inside the large working area, there is, among others, a 24-position tool magazine and an electro-spindle, which rotates at a maximum speed of 12000 rpm. All of this is complemented by an advanced HEIDENHAIN CNC control with an intuitive interface, where machining programmes are created in just a few steps. The DECKEL MAHO milling center has had only one owner to this date. Technical parameters of the DECKEL MAHO DMU 60P milling center - number of axes: 5 - feed in the X/Y/Z axis: 600/650/550 mm - maximum electro-spindle rotational speed: 12000 rpm - minimum electro-spindle rotational speed: 20 rpm - electro-spindle drive power: 15 kW - tool holder: SK-40 - operating hours: 7 ...

FADAL VMC 2016L CNC machining center was built in 1997 in the United States. The machine, designed for precision machining of workpieces, has a large, fully illuminated work area, with automatic tool changer (ATC) and a reliable spindle. Excellent dynamics and feed repeatability are ensured by precision guideways along which the X,Y,Z axes are guided. All this is complemented by the intuitive CNC control where machining programmes are created in just a few steps. All this makes the VMC 2016L CNC vertical machining center the perfect solution for any production facility. Technical specifications of the FADAL VMC 2016L CNC milling machine - CNC controller: FADAL CNC 32MP - feed in the X/Y/Z axis: 500/400/700 mm - work table dimensions (L x W): 750 x 410 mm - number of T-slots: 3 - maximum spindle rotational speed: 7500 rpm - automatic tool changer (ATC) - maximum tool diameter: 7 ...

YCM FP100A CNC machining center was built in 2014 in Taiwan. Equipped with state-of-the-art technology and components from renowned brands, the machine is used for precision 3D machining of heavy workpieces weighing up to 1000 kg. During machining, the reliable spindle built in IDD (Isolated Direct Drive) technology moves on roller guides from Japanese company IKO, which minimises the effects of bending torque and also ensures high positioning accuracy. In addition, the use of precision ceramic bearings guarantees quiet operation and long life of the spindle. The FP100 A milling center is offered with a comprehensive range of equipment, including a 30-position magazine with automatic tool changing and an intuitive CNC control by HEIDENHAIN. The controller’s excellent optimisation and multitude of functions significantly simplify operation and enable advanced machining programmes to  ...

FADAL VMC 3016 CNC machining center, built in 1994 in the United States is used for precision machining of workpieces with a maximum weight of 453 kg. The machine, distinguished by its extensive machining capabilities and high productivity, has a large, fully illuminated workspace with a powerful spindle and a 21-position tool magazine. The movement of the X, Y and Z axes along precise guideways results in excellent dynamic and repeatable feed rates. This is completed by an intuitive CNC control with many useful functions, in which machining programmes are created in just a few steps. The VMC 3016 CNC vertical machining center weights 3765 kg. Technical specifications of the FADAL VMC 3016 CNC milling machine - CNC controller: FADAL CNC 32MP - feed in the X/Y/Z axis: 760/400/500 mm - rapid traverse in the X,Y axis: 18 m/min - rapid traverse in Z axis: 15 m/min - cutting speed in  ...

HAAS UMC-750SS CNC vertical machining center built in 2018 in the United States is used for precision machining of complex workpieces with a maximum weight of 300 kg. The machine features a large work area which includes a direct-drive spindle, a 500 mm diameter rotary tilting table with a precision pilot hole and a measuring probe from the renowned RENISHAW brand. In addition, each tool taken from the 40-position magazine is continuously measured to ensure continuity of the machining process. The UMC-750SS CNC machining center is offered with extensive equipment, which includes e.g. a belt chip conveyor and a perfectly optimised HAAS NGC CNC controller with many useful functions. To this date, the machine has run a small amount of time and has been used for prototyping, tooling production and small batch machining. The HAAS UMC 750 SS milling center weighs 8200 kg. Technical speci ...

SAMAG MFZ 2-2 CNC milling machine was built in 2005 in Germany. This specially designed machine for the automatic machining of workpieces made of metallic materials has been equipped with two high-performance spindles and two work tables with a rotary axis, allowing for simultaneous machining of a part and loading/unloading of another. This solution maximises production efficiency and shortens production times, making the machine significantly distinguishable from other milling machines on the market. The machining, characterised by high quality and precision, is performed in automatic mode or in the setting up mode, using rotary tools taken from a capacious magazine. During its service life, the SAMAG twin-spindle milling machine has worked around 40000 hours and has been continuously serviced. The total weight of the machine is approximately 22 tonnes. Technical specifications of ...

DMG MORI CMX 1100 V CNC machining center was built in 2019 in Japan by DMG MORI CO.,LTD. The machine, designed for machining workpieces with a maximum weight of 1000 kg, is distinguished by the use of state-of-the-art components and technical solutions which guarantee excellent machining results for many years of continuous operation. The machining process is performed inside a fully illuminated workspace by means of reliable components in the form of cutting tools and a high-speed spindle. The ‘C’ shaped cast iron bed perfectly dampens any vibrations and oscillations generated during machining, while ensuring the highest possible process stability. The CMX 1100 V CNC vertical machining center on offer also has a wide range of optional equipment, consisting of, among others, measuring probes from the renowned RENISHAW brand, a divider and the advanced MAPPS FANUC CNC control. Over ...

YCM FP66A CNC machining center was built in 2013 in Taiwan. The machine, equipped with components from renowned brands and state-of-the-art technology, is used for precision 3D machining of workpieces with a maximum weight of 500 kg. The machining process is performed by a powerful spindle, rotating at a maximum speed of 16000 rpm, and cutting tools taken from a 30-position magazine. The spindle moves in the X,Y,Z axis on roller guides of the Japanese company IKO with ball-and-screw systems, directly driven by digitally controlled servomotors. This solution ensures high positioning accuracy and repeatability over a long period of use. The FP66 A CNC vertical machining center also features a high-quality cast-iron gantry structure, which, correlated with the extra-wide base resting on the ground, minimises the effects of bending torque resulting from the hanging mass of the spindle. Th ...

OKK VM5-II CNC machining center built in 2002 in Japan, is used for precision machining of workpieces. The machine features a large workspace, which includes among others a 30-position tool magazine and a reliable spindle, operating at a maximum speed of 8000 rpm. The design, made from high-quality raw materials, ensures exceptional rigidity and stability, even during the most intensive challenges. The OKK VM5-2 CNC vertical machining center weighs 6806 kg. Technical specifications of the OKK VM5-II CNC milling machine - CNC controller: FANUC Series 16i-M - feed in X/Y/Z axis: 1020/510/510 mm - work table dimensions (L x W): 1049 x 561 mm - maximum spindle rotational speed: 8000 rpm - 30-position tool magazine - tool holder: BT 40 - number of T-slots: 5 - installed power: 47 kVA - power supply: 3x 380 V; 50 Hz - dimensions (L x W x H): 3330 x 2830 x 3000 mm - weight of mach ...

Specifications: Capacity: Swing over bed Swing over bed with interference from front cover Swing over cross slide Maximum bar capacity Standard turning diameter Maximum turning diameter (main spindle) Maximum turning length Main Spindle: Maximum speed Spindle nose Spindle bearing diameter Spindle through hole diameter Minimum spindle indexing angle (C-axis) Travels: X-axis travel Y-axis travel Z-axis travel Feed Rate: X & Z-axes rapid traverse rate Y-axis rapid traverse rate Tailstock advance/retract traverse rates Maximum jog feedrate of tailstock Turret: Number of turret tool stations Shank height for angled tool Shank diameter for boring bar (main spindle) Rotary tool machining capacity Maximum rotary tool speed Tailstock: Travel Spindle diameter Spindle taper Cutting time Operation time Power On hours 36.22 23.58 29.21 3.15 10 ...

HARDINGE BRIDGEPORT DT 480 P3 Stock number 8075228 X-axis travel 18.90 Y-axis travel 15.75 Z-axis travel 16.93 Spindle speed 10,000 RPM Spindle taper BT 30 Tool magazine capacity 20 ATC Control Fanuc Additional axis 4th Axis Ready Coolant Standard Coolant System

TECHNICAL DETAILS - Number of spindles : 2 - Number of turrets : 1 - Number of axes : 6 MAIN SPINDLE - Spindle nose : A2-8 - Max. bar diameter : 80 [mm] - Spindle power : 18,5 [kW] - Spindle speeds : 4.000 [rpm] - Max. turning diameter : 366 [mm] - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260 x 795 [mm] - Y stroke : +/- 50 [mm] - Live tools speed : 6.000 [rpm] - Live tools power : 5,5 [kW] COUNTER-SPINDLE - Spindle nose : A2-5 - Max. bar diameter : 43 [mm] - Max. turning diameter : 190 [mm] - Spindle power : 11 [kW] - Spindle speeds : 6.000 [rpm] - C axis indexing precision : 0,001 [°] - Travel : 734 [mm] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 41 [kVA] WEIGHT & DIMENSIONS : 1730 - Machine floor space : 4.414 x 2.370 [mm] - Machine height : 2.115 [ ...

5 axis X-Axis 800 mm Y-Axis 800 mm Z-Axis 600 mm Interference circle diameter 1070 mm Distance Spindle Up to 823,5 mm Machine-Table Load 1000 Kg Maximum rapid travel X/Y/Z at TCP max 75 m/min Cutting-Tool Interface HSK-A63 Motor Spindle Power at CDF 25% max 50kW Engine Spindle Torque at CDF 25% max 187 Nm Machine weight 13000 kgs Wiring diagram: 2526-95-64934955 Resy Filtration system Model : 14-P00449-3 Serial : KBF- 452/500 Erowa pallet changer Model RobotEasy Serial number ERE1364 Year 2014 Weight 1300kgs Hyfra Pedia chillers Model sigma 7-s

ISEL SM Alpha Omega – 5-axis CNC machining center with 2 spindles For sale is a precise and versatile ISEL SM Alpha Omega 5-axis CNC milling machine, built in 05/2015, equipped with two high-frequency spindles. This machine is ideal for applications in medical technology, precision engineering, micromachining, and mold and prototype construction. Specifications: Model: ISEL SM Alpha Omega Year of manufacture: 05/2015 Item number: 274507 SSZ6000 Axes: 5 (X, Y, Z, A, B) Travel: X-axis: 1800 mm Y-axis: 1700 mm Z-axis: 800 mm Spindles: Quantity: 2 high-frequency spindles Speed: up to 60,000 rpm Power: up to 6 kW Tool holder: HSK25 / HSK32 Dimensions (WxDxH): approx. 2800 x 2550 x 2950 mm Weight: approx. 1400 kg Solid steel/granite sandwich construction for high rigidity and vibration damping Highly dynamic linear motors in X and Y axes Turn/swivel  ...

Travel X-Y-Z 850-700-500 mm Spindle HSK 63, 18,000 rpm, 86/173 Nm, 10/20 KW (100/20%) NC swivel rotary table 440 mm, 450 kg, A +91 / - 139 °, C 360° Equipment: HEIDENHAIN TNC 640 HEIDENHAIN Hand Control Panel HEIDENHAIN Probe HEIDENHAIN electr. Heat compensation BLUM LC 50 Tool Measurement & Fracture Control Dynamic Efficiency (ACC, AFC) Dynamic Precision (CTC, AVD, LAC) KinematicOpt MIMS 36-fold tool magazine ZM 216 Additional Magazine NC – Swivel rotary table Memory module 1 6/3-fold memory Memory module 2 6/3-fold memory Expansion of memory module 1 to 12/4-fold Expansion of memory module 2 to 11/4-fold Sealing air for scales Blow-off device Blowing air through spindle center Internal coolant supply 80 bar with bed flush HS flex: 10 pallets 400x400 mm, 2 pallets 500x400 mm

Control 840D SL Slimline Multi Touch Technical details x-travel 600 mm y-travel 560 mm z-travel 510 mm Indel: Max. speed 12,000 rpm/-1 Drive power - main spindle 13 / 9 kW Max. torque 82 / 54 Nm Distance between spindle nose and table 120 - 630 mm Workbench: Table clamping area 900 x 560 mm max. table load 600 kg T-slots 5 Working height 850 mm Tool magazine: Number of tool locations 30 pos. Tool holder SK 40 max. tool diameter 80 mm max. tool diameter. with a free neighboring box. 130 mm max. tool length 300 mm max. tool weight 8.0 kg Tool-tool changeover time 2.4 sec Changeover time chip - chip 6.7 sec Feeds: Rapid traverse 30 m/min Feed force 5 kN Feed speed max. 30,000 mm/min Total power requirement 32 kVA Machine weight approx. 5.0 t Space requirements approx. 4.0 x 5.0 x 3.0 m Machine can be demonstrated under working condition. Low service life!  ...

Spindle speeds up to 10,000 rpm, High-pressure system through the spindle with 15 bar, Tool magazine with a capacity of 21 holders, Chip conveyor belt, X-axis movement 700 mm Y-axis movement 400 mm Z-axis movement 330 mm Max. weight of the workpiece 300 kg Table: Outer length 850 mm Outer width 410 mm The machine is energized.

X-axis movement: 800 mm, Y-axis movement: 600 mm, Z-axis movement: 500 mm, Clamping surface - diameter: 280 mm, Control: Siemens S 840 D. operating hours 104,716, Weight: 8.5T, Dimensions: 2.7x2.21x2.93 m.

This HAAS VF-2 Vertical Machining Center from 1992 is an excellent choice for users looking for a reliable CNC machine. With a spindle horsepower of 30HP and a maximum spindle speed of 7500 RPM, this machine can handle drilling and milling tasks with ease. It comes equipped with CAT 40 spindle taper, Newer CNC control, and electric power source.

X-axis: 1,020 mm Y-axis: 610 mm Z-axis: 600 mm Table dimensions: 1,150 x 580 mm Spindle Holder: BT-40 Spindle speeds: 100 - 10,000 rpm. Tool changer: 30 positions Control: Heidenhain TNC410 Equipped with: - Internal spindle cooling (IKZ) 9 bar - 4th axle of Hofmann WRMH-300R - Approx. 20 tools - Tilting table for the 4e axis - Operating instructions and documents Country of origin: UK Motor power: 11 kW Machine weight: 4,400 kg Machine LxWxH: 280 x 240 x 270 cm

WE OFFER AN NICE WORKING CONDITION 5 AXIS SIMULTANIUS ROBODRIL WITH COMPLETE TOOLS AND ACCESSORIESS AN NICE OPORTUNETEY . MACHINE IS IN THE PRODUCTION WRKING DAILY ORDERS WITH MACHINE COMES 21X TOOLHOLDERS 1X RENISHAW 1X TOOL TOUCH MEASURING 4-5 axis rotary Machine type: 5AXIS MILLING -SIMULTANIUS Manufacturer: ROBODRILL-FANUC Model: ALPHA-D21L iB5ADV Year of construction:2021 Condition: EXCELLENT (used) Functionality: fully functional Operating hours:4,495 h ON DATE : 20.02.2025 TECHNICAL DETAILS Travel distance X-axis: 700 mm Travel distance Y-axis: 400 mm Travel distance Z-axis: 400 mm SPINDLE SPEED: 24.000RPM

Auction 509 / Pos-No.: 52 Designation: CNC High Speed Milling Machine Make: Digma Type: 500GC Year of Make: 2000 Serial No.: 05-180 Description: Travels X/Y/Z - 500/400/350 mm, control, type Andronic 400, 30-fold tool changer, spindle speed 30,000 rpm, travels X/Y/Z - 600/400/350 mm, graphite extraction system, sep. Control cabinet, with cooling, workbench, metal/wood, with base, 8 pull-outs, contents of machine accessories, mobile workbench, wood/metal, approx. 1,200 x 700 mm, 6 pull-outs, contents of machine accessories Good day this item is part of an insolvency online auction. The starting price is € 6,000.00 net (plus 18% buyer's premium, plus gross VAT).

CNC control Winmax 9 Travel x/y/z 1060 mm / 610 mm / 610 mm Max. spindle speed / tool holder 10,000 rpm / SK 40 Work area 1,200 x 610 mm Tool changer 24 – speed Tool holder / power consumption of the main spindle SK40 / 15 kVA Machine weight / power consumption 30 kVA Remarks: Machining center with upgrade to Winmax 9

Stock number: 3922 PROCESSING Manufacturer: EMCO, Type: MILL E-600 Machines NO.: M-06204707, Year of manufacture: 2007 Specifications: Table size 700 x 500 mm Large table load 500 kg Longitudinal movement (X) 600 mm Transverse movement (Y) 500 mm Vertical movement (Z) 500 mm Size distance spindle/table 700 mm Spindle cone 40 iso Stepless spindle speeds 10000 rpm Total power 16 KVA Tool changer 20 places Control Fanuc Oi-MC Fabr. Controlled in axes 3 Operating hours spindle 3167 hours Accessories: Cooling by spindle Chip conveyance. Cooling water system. Length: 2040 mm, Height: 3000 mm, Width: 2500 mm, Weight: 3800 kg

X 600 mm Y 500 mm Z 500 mm B -5 / +110 ° C 360° Spindle 24,000 rpm, 26/16 KW, 100 / 67 Nm, HSK 63 CNC CELOS 60-fold tool magazine 8-fold pallet changer EROWA PH 150-8 (320x320mm) NC - Swivel Table Infrared probes BLUM Laser Inner + outer air cooling Inner + outer coolant device Conveyor similiar to new condition!

CNC control Ultimax Travel x/y/z 1060 mm / 610 mm / 610 mm Max. spindle speed / tool holder 10,000 rpm / SK 40 Work area 1,200 x 610 mm Tool changer 24 – speed IKZ 30 bar Tool holder / power consumption of the main spindle SK40 / 15 kVA Machine weight / power consumption 30 kVA 4. NC - Axis

Stock number: 3912 PROCESSING Manufacturer: EXCELL, Type: 810 Machine NO.: ES 8031, Year of manufacture: 0 Specifications: Table size 900 x 480 mm Large table load 400 kg Longitudinal movement (X) 810 mm Transverse movement (Y) 510 mm Vertical movement (Z) 560 mm Size distance spindle/table 700 mm Spindle Taper 40 Iso Spindle motor 9 Kw Tool changer 25 places Control Fanuc OM Fabr. Accessories: Cooling water system. Operating instructions Length: 2200 mm, Height: 2600 mm, Width: 3500 mm, Weight: 5400 kg

For sale: Powerful Doosan vertical machining center type Mynx 7500/40, equipped with the well-known control system of the Fanuc i-series including Fanuc Manual Guide i dialog area. This model, with a net weight of 13,500 kilograms, has an X, Y and Z axis displacement of 1,525 x 762 x 625 mm each. The table size is 1,600 x 750 mm. The machine is fully equipped with block guides. The pivot shot is an ISO 40 shot. The machine has a so-called arm changer with 32 positions and is also equipped with cooling through the spindle. As an extra, the machine is equipped with an integrated fourth Nikken axle with counter center. The machine also has a right-hand discharge chip conveyor. On request, you can purchase additional tool holders for the machine. The machine is in excellent condition and for more information please send an email to chrismachinematch.nl

Sell our old vertical milling machining center as a spare parts dispenser, unfortunately I can not say what the machine has exactly, I only know that the control unit is defective