We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
with 3-axis digital display, Fabr. HEIDENHAIN, with coolant device, machine light, angle milling head and counter holder
with 2-axis digital display, Fabr. HEIDENHAIN, with angle milling head, 2 dividing heads, additional clamping table, counter holder, 3-jaw chuck, various interchangeable wheels, machine light and steel transport trolley
with 3-axis digital display, Fabr. HEIDENHAIN, with coolant device and machine light
Lid FP 1, Year of construction approx. 1983 / Overhauled by Arnold approx. 2012 3 axis digital display, Travel X/Y/Z 400/150/340 mm, Table size 600 x 210 mm, T-slots: 4 T - groove width: 12 mm Spindle speeds:: 20 - 2000 rpm Speed levels working spindle: 12 Feed stages: 10 Spindle holder: MK 4 Quill stroke vertical: 60 mm Machine weight approx.: 0.8 t
Clamping surface of the fixed angle table: 195 x 605 mm Table movement longitudinal/vertical automatic and by hand: 290/300 / 330/340 mm Headstock transverse movement by hand: 150 mm Spindle holder: ISA 40 16 spindle speeds: 40 - 2000 rpm 16 feeds: 10 - 500 mm/min Spindle drive motor: 380 V, 1/1.4 kW Weight approx.: 660 kg Space requirement: 1200 x 900 x 1570 mm
Univ. Tool Milling Machine DECKEL Type FP 1 Masch. No. 37101 Year of construction approx. 1969 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle holder MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal: 60-1200 rpm. 12 steps Motor power 1.0 and 1.5 kW pole-switchable Mains connection 380 volts, 50 Hz - Spindle speed over 2 motor speeds and 6 gear stages - Feed in the X and Z axes - Coolant device with mechanical pump in the machine foot - Quill shift on the vertical milling head 60 mm - Adjacent control cabinet Space requirements L x W x H 1000 x 900 x 1750 mm Weight 690 kg good condition Accessories: -Collets -Roundtable -Vice - Counter holder H. milling
Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 51265/08 Year of construction approx. 1967Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 2100 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.6 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Spindle speed over 2 motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- adjacent control cabinetSpace requirement L x W x H 1100 x
Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 2101 - 0778 Year of construction 1979Routes manual X: 300 mm Y: 160 mm Z: 330 mmTable size 600 x 210 mmSpindle holder SK 40 - S20x2Spindle speed 40-2000 rpm. 16 stepsFeed X and Y-axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.5 and 1.9 kW pole-switchableMains connection 380 volts, 50 Hz- Stepless feed in the X and Z axis- Spindle speed over 2 motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm-
Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 2101 - 0875 Year of construction 1979Routes manual X: 300 mm Y: 160 mm Z: 330 mmTable size 600 x 210 mmSpindle holder SK 40 - S20x2Spindle speed 40-2000 rpm. 16 stepsFeed X and Y- axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.4 and 1.8 kW pole-switchableMains connection 380 volts, 50 Hz- infinitely variable feed in the X and Z axis- Spindle speed over 2 motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm-
Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 52185/08 Year of construction 1968Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 250 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.4 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Two motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- Coolant device in the machine foot- Adjacent control cabinet- Counter holder
Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 28317 Year of construction approx. 1960Travel distances X: 245 mm Y: 150 mm Z: 340 mmTable size 600 x 210 mmSpindle holder horizontal MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 0.8 and 1.1 kW pole-switchableMains connection 380 volts, 50 Hz spindle speed over 2 motor speeds and 6 gear stages- Feed in the X and Z axis coolant device with mechanical pump in the machine base
Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 34338 Year of construction approx. 1965Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 200 mmSpindle holder MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stagesMotor power 1.0 and 1.5 kW pole-switchableMains connection 380 volts, 50 Hz- 3-axis digital display HEIDENHAIN, type VRZ 753 B- Spindle speed over 2 motor speeds and 6 gear stages- Feed in the X and Z axis coolant device with
Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 33064 Year of construction approx. 1960 Travel distances X: 300 mm Y: 150 mm Z: 330 mmTable size 600 x 210 mmSpindle holder MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 1.1 and 1.4 kWNet connection 380 volts, 50 Hz- Feed in the X and Y axis- Pinol displacement on the vertical milling head- Fixed angle table- Coolant device with mechanical pump in the machine foot- adjacent
x-travel: 300 mm y-travel: 340 mm z-travel: 250 mm total power requirement: 1,5 kW weight of the machine ca.: 0,8 t Heidenh. 3 axes aktiv digital display Year of construction unknown The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Refurbished lid FP 1 for sale. - 3-axis digital display - Cooling/lubrication pump in the machine base - Overhauled 2024 - Incl. tool table and machine vice If you have any questions, please: 01728101136
x-travel: 300 mm y-travel: 200 mm z-travel: 340 mm Spindle Speed: 40-2000 U/min. weight of the machine ca.: 650 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Univ. tool milling machine DECKEL type FP 1 Masch. Nr. 52185/08 Year of construction 1968 Travel distances X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 250 mm Spindle holder SK 40 - S20 x 2 Spindle speed 40-2000 rpm 16 stages Motor power 1.0 and 1.4 kW pole-switchable Mains connection 380 volts, 50 Hz - Feed in the X and Z axis - Two motor speeds and 8 gear stages - Pinol shift on the vertical milling head 60 mm - Fixed angle table coolant device in the machine foot - adjacent control cabinet counter holder with counter bearing for horizontal milling SK 40 Space requirement L x W x H 1200 x 1100 x 1600 mm Weight approx. 1000 kg Very good condition; used
Univ. tool milling machine DECKEL type FP 1 Masch. Nr. 2101 - 0778 Year of construction 1979 Travel paths manual X: 300 mm Y: 160 mm Z: 330 mm Table size 600 x 210 mm Spindle holder SK 40 - S20x2 Spindle speed 40-2000 rpm. 16 steps feed X and Y-axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.5 and 1.9 kW pole-switchable mains connection 380 volts, 50 Hz - infinitely variable feed in the X and Z axis - Spindle speed over 2 motor speeds and 8 gear stages - Pinol shift on the vertical milling head 60 mm - Vertical milling head swivel and 100 mm horizontally extendable - Fixed angle table 600 x 210 mm - Coolant device in the machine base - Adjacent control cabinet - Original chip tray for placing on the machine foot - Electrical plan available , space requirement L x W x H 1350 x 1100 x 1700 mm , weight 770 kg , good condition; used
Univ. tool milling machine DECKEL type FP 1 Masch. Nr. 2101 - 0875 Year of construction 1979 Travel paths manual X: 300 mm Y: 160 mm Z: 330 mm Table size 600 x 210 mm Spindle holder SK 40 - S20x2 Spindle speed 40-2000 rpm. 16 steps feed X and Y-axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.4 and 1.8 kW pole-switchable mains connection 380 volts, 50 Hz - infinitely variable feed in the X and Z axis - Spindle speed over 2 motor speeds and 8 gear stages - Pinol shift on the vertical milling head 60 mm - Vertical milling head swivel and 100 mm horizontally extendable - Fixed angle table 600 x 210 mm - Coolant device in the machine base - Adjacent control cabinet - Original chip tray to be placed on the machine foot - Electrical diagram available Space requirement L x W x H 1350 x 1100 x 1700 mm Weight 770 kg Very good condition; used
Univ. tool milling machine DECKEL type FP 1 Masch. No. 33064 Year of construction approx. 1960 Travel distances X: 300 mm Y: 150 mm Z: 330 mm Table size 600 x 210 mm Spindle holder MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm 12 steps Spindle speed horizontal 60-1200 rpm 12 steps Motor power 1.1 and 1.4 kW Mains connection 380 volts, 50 Hz - Feed in the X and Y axes - Pinole shift on the vertical milling head - Fixed angle table - Coolant device with mechanical pump in the machine base - adjacent control cabinet with cable plug connection Space requirement L x W x H 1100 x 900 x 1600 mm Weight approx. 900 kg Good condition Machine newly painted in the original shade of grey; used
Univ. tool milling machine DECKEL type FP 1 Masch. No. 28317 Year of construction approx. 1960 Travel distances X: 245 mm Y: 150 mm Z: 340 mm Table size 600 x 210 mm Spindle holder horizontal MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm 12 steps Spindle speed horizontal 60-1200 rpm 12 steps Motor power 0.8 and 1.1 kW Pole switchable Mains connection 380 volts, 50 Hz - Spindle speed over 2 motor speeds and 6 gear stages - Feed in the X and Z axis - Coolant device with mechanical pump in the machine foot - Pinol shift on the vertical milling head 60 mm - Vertical milling head +/- 90 swivelling - Metal substructure made of angle iron with machine feet Space requirement L x W x H 1100 x 900 x 1650 mm Weight 650 kg Good condition; used
Univ. tool milling machine DECKEL type FP 1 Masch. No. 34338 Year of construction approx. 1965 Travel distances X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle holder MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm 12 steps Spindle speed horizontal 60-1200 rpm 12 steps Motor power 1.0 and 1.5 kW Pole switchable Mains connection 380 volts, 50 Hz - 3-axis digital display HEIDENHAIN, type VRZ 753 B - Spindle speed over 2 motor speeds and 6 gear stages - Feed in the X and Z axis - Coolant device with mechanical pump in the machine foot - Pinol shift on the vertical milling head 60 mm - swivel, rotary and tiltable angle table - adjacent control cabinet Space requirement L x W x H 1000 x 900 x 1750 mm Weight 690 kg good condition; used
Univ. tool milling machine DECKEL type FP 1 Masch. Nr. 51265/08 Year of construction approx. 1967 Travel distances X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 2100 mm Spindle holder SK 40 - S20 x 2 Spindle speed 40-2000 rpm 16 stages Motor power 1.0 and 1.6 kW pole-switchable Mains connection 380 volts, 50 Hz feed rate in the X and Z axis - Spindle speed over 2 motor speeds and 8 gear stages - Pinol shift on the vertical milling head 60 mm - Fixed angle table - adjacent control cabinet Space requirement L x W x H 1100 x 1100 x 1600 mm Weight 650 kg Good condition; used
Univ. tool milling machine DECKEL type FP 1 Masch. No. 2101 - 0875 Year of construction 1979 Manual travel X: 300 mm Y: 160 mm Z: 330 mm Table size 600 x 210 mm Spindle holder SK 40 - S20x2 Spindle speed 40-2000 rpm. 16 steps Feed X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.4 and 1.8 kW pole-switchable Mains connection 380 volts, 50 Hz - Infinitely variable feed in the X- and Z-axis - Spindle speed over 2 motor speeds and 8 gear stages - Quoil displacement on the vertical milling head 60 mm - Vertical milling head swivels and 100 mm horizontally extendable - Fixed angle table 600 x 210 mm - Coolant device in the machine base - Adjacent control cabinet - Original chip tray for placing on the machine base - Electrical plan available Space requirements L x W x H 1350 x 1100 x 1700 mm Weight 770 kg very good condition; used
Universal tool milling machine DECKEL FP 1 with 3 axis active digital display Heidenhain TNC 113 Year of construction: 1987 Travel: X 300 Y 160 Z 340 Speed range: 40 – 2000 rpm With the following accessories: Universal table 600 mm x 250 mm clamping surface Movable vertical milling head Extendable drill quill Infinitely variable feed via potentiometer 1 machine vice 1 counter holder with counter bearing 1 pc. milling mandrel long 0 22 mm Various tool holders S 22 x 2 Bellows Z Axis Machine light Automatic central lubrication pump Chip collection plate Coolant system Operating instructions THE MACHINE IS IN VERY GOOD CONDITION !!
x-travel: 300 mm y-travel: 340 mm z-travel: 250 mm Control: total power requirement: 1,5 kW weight of the machine ca.: 0,8 t Heidenh. 3 axes aktiv digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Univ. Tool milling machine DECKEL Type FP 1 Masch. No. 28317 Year of construction approx. 1960 Travel X: 245 mm Y: 150 mm Z: 340 mm Table size 600 x 210 mm Spindle holder horizontal MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm 12 steps spindle speed horizontal 60-1200 rpm. 12 steps Motor power 0.8 and 1.1 kW pole switchable Mains connection 380 volts, 50 Hz - spindle speed over 2 motor speeds and 6 gear stages - feed in the X- and Z-axis coolant device with mechanical pump in the machine foot - Pinol shift on the vertical milling head 60 mm- Vertical milling head +/- 90 pivotable - Metal substructure made of angle iron with machine feet Space requirement L x W x H 1100 x 900 x 1650 mm Weight 650 kg good condition; used
Univ. Tool milling machine DECKEL Type FP 1 Masch. No. 34338 Year of construction approx. 1965 Travel routes X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle holder MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm 12 steps Spindle speed horizontal 60-1200 rpm. 12 stages Motor power 1.0 and 1.5 kW pole switchable Mains connection 380 volts, 50 Hz - 3-axis digital display HEIDENHAIN, type VRZ 753 B - spindle speed over 2 motor speeds and 6 gear stages - feed in the X- and Z-axis coolant device with mechanical pump in the machine foot - Pinole shift on the vertical milling head 60 mm- swivel, rotate and tiltable angle table - adjacent control cabinet Space requirement L x W x H 1000 x 900 x 1750 mm Weight 690 kg good condition; used
Univ. Tool milling machine DECKEL Type FP 1 Masch. No. 51265/08 Year of construction approx. 1967 Travel routes X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 2100 mm Spindle holder SK 40 - S20 x 2 Spindle speed 40-2000 rpm 16 steps Motor power 1.0 and 1.6 kW pole switchable Mains connection 380 volts, 50 Hz feed in the X and Z axes - Spindle speed over 2 motor speeds and 8 gear stages - Pinole shift on the vertical milling head 60 mm - Fixed angle table - adjacent control cabinet Space requirement L x W x H 1100 x 1100 x 1600 mm Weight 650 kg good condition; used
Univ. Tool milling machine DECKEL Type FP 1 Masch. No. 33064 Year of construction approx. 1960 Travel X: 300 mm Y: 150 mm Z: 330 mm Table size 600 x 210 mm Spindle holder MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm 12 steps Spindle speed horizontal 60-1200 rpm 12 stages Motor power 1.1 and 1.4 kW Mains connection 380 volts, 50 Hz feed in the X and Y axes - Pinol shift on the vertical milling head - fixed angle table - Coolant device with mechanical pump in the machine foot - adjacent control cabinet with cable plug connection Space requirement L x W x H 1100 x 900 x 1600 mm Weight approx. 900 kg good condition Machine new Painted in original grey tone; used