Scheugenpflug DOS P016 Piston Feeder
Piston dosing system DOS P
for a wide range of requirements
The piston dosing systems from Scheugenpflug work according to the
principle of volumetric dosing, i.e. the dosed amount of material is
mechanically determined by the geometry and stroke of the associated
cylinders. The cylinder is filled with the potting material by feeding
it from the corresponding material conveyor system. If a two-component
medium is used, the volume of the two cylinders simultaneously
determines the ratio of the resin and hardener components to each
other. The dosing pistons simultaneously push the two components in
separate channels towards the exhaust valve, where they only mix in
the static mixing tube to form a homogeneous reactive medium.
The Dos P016 / 050 / 100 / 300 / TCA piston dosing systems are
high-precision volumetric dosing systems designed for processing 1K
and 2K materials and covering a wide range of requirements. Precisely
dimensioned dosing cylinders enable the application of reproducible
material volumes.
In the case of 2K materials, the parallel emptying of both cylinders
into the common mixing tube creates a constant mixing ratio at all
times and thus maximum process reliability. At the same time, even
potting media that are sensitive to pressure, moisture or shear can be
gently conveyed without having to fear changes in the material. Users
also benefit from easy and fast maintenance, a long service life and
significantly reduced maintenance costs. With optional features such
as valve monitoring, mixing tube heating or dosing head heating, these
systems can be flexibly adapted to the respective task.
Your benefits
No dependence of dosing accuracy on temperature, pressure or
viscosity
Constant mixing ratio at all times due to parallel emptying of the
dosing cylinders
Wide range of applications (material and application)
Key features
Simultaneous squeezing of the cylinders by means of a common stroke
mechanism enables a homogeneous mixing ratio
Sensory monitoring of the intake and exhaust valves as well as the
cylinder filling
Temperature control of the material by means of mixing tube heating
(optional)
Dosing needle monitoring with camera (optional)
Product
General
Materials: 1K and 2K
Viscosity: From liquid to highly viscous
Fillers: Filled and/or abrasive media
Working Principle: Volumetric Dosing
Properties
Constant mixing ratio at 2K
Independent of temperature, material delivery pressure and viscosity
of the casting resin
Exactly reproducible and highly precise results
Highest process reliability
Use case
Filling potting, sealing, bonding, application of thermal interface
materials, sealing, encapsulation (Glob Top)
DOS P016
Max. volume/shot 2K at 1:1 ratio
1K: 0.06/17 ml
2K: 0.1/32 ml
Dosing speed max.1 [ml/s]: 2
Dosing accuracy at max. stroke [%]: < 0.5
Heatable up to max.2 [°C]: 80
Outlets:
1K: 1-4, 6, 8
2K: 1-4
Weight: 14 kg
Dimensions (W x H x D)
290 x 350 x 230 mm
You can find more feeders - new and used - in our shop!
International shipping costs on request!
Germany
46325 Borken 
