This hydraulic baler is specially designed for the production of
bales,
which have the optimal dimensions, adapted to normal maritime
containers.
The vertical press with 1 box has a capacity of 2 to 4 bales/hour from
300 to
450 kg depending on material.
Attach packaging material
As soon as the previous bale is removed from the baler, the operator
places a new bale.
Packaging material on the lower press plate. The operator brings the
press into the
Starting position, ready to fill.
Filling and pressing cycle
The filling of the box is done manually via 2 filling doors. When the
press box is full
the doors are closed and the press starts the cycle. The Press
Plate
comes down and compacts the material under the barbs.
Next, the press plate rises back up allowing the operator to refill
the press
can. The number of cycles per bale depends on the quantity and density
of the bale.
Material. On average, 2 to 3 cycles per bale are calculated.
After the last filling, the operator places a packing on press box for
packing
from the top of the bales. This packaging can only be attached to this
time.
are used to prevent damage caused by gravity hooks.
The press makes a final press stroke. When the maximum pressing force
is reached, the
the box is automatically hoisted by 2 hydraulic cylinders.
Packing and tying bales
The operator can now further pack and tie the free bale. Following
the pressure plate is lifted to release the pressure on the bale and
the bale
is manually pushed out of the press.
Security Measures
The filling doors of the press are provided with safety contacts,
which prevents the press from
can be operated when the doors are open.
The movements 'Top plate up' and 'Press box down' are activated with a
2-
Hand control due to the safety of the operator.
The press is also equipped with an adjustable convex mirror so that
the
Machine operator can see the back of the machine from its position at
the
Control panel. The operator must ensure that no one is behind the
press when 2-
Hand control is enabled.
Germany
