Key data: 600 kN
Angebot/Offer: ENGEL E-Victory 170/60 Year of manufacture 2018 Nur/Only:18500h Viper Robot 20
Key data: 700 kN, 103 g/PS, 30 mm
Engel ES 330/70H Clamping force: 70t Year of construction: 2000 Shot capacity: 103g Injection unit .../330 Screw diameter: 30 mm Injection pressure: 2180 bar Injection volume: 113 ccm Shot capacity: 103 g L/D ratio: 23,6 Clamping unit 70/... Clamping force: 70 t Plate size: 690 x 680 mm Distance between tie bars: 450 x 450 mm Weight: 5200 kg Control: EC100 Werkzeuge: -Trichter -2 x Hydraulikkern -EUROMAP 12
Key data: 20000 kN, 135 mm
Dosing 1: Plasticizing 1: Screw diameter mm 135 Screw diameter mm 120 | 135 | 150 Dosing Stroke Screw stroke mm 610 Maximum injection capacity cm3 6899 | 8731 | 10780 Screw speed min-1 125 Worm torque Screw torque Nm 14000 Maximum screw speed reduced torque min-1 135 Reduced torque maximum screw speed Nm 12963 Reduced screw speed maximum screw torque min-1 112 Maximum screw torque reduced screw speed Nm 15630 Plasticizing performance (3-zone) 1.2 Recovery rate (3-zone screw) 1.2 g/s 165 | 222.9 | 231,3 Plasticizing performance (barrier) 3 Recovery rate (barrier screw) 3 g/s 208.3 | 279.2 | 264,6 1) Values for polystyrene up to injection unit 2550 according to ETR 10100 1) Data for GPPS up to injection unit 2550 acc. ETR 10100 2) Values for HDPE from injection unit 3550 according to ETR 10100 2) Data for HDPE from injection unit 3550 onward acc. ETR 10100 3) Values for HDP ...
Key data: 750 kN, 35 mm
Engel - Injection moulding machine e - Max - 310/75 ( No.:4 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 42,349,940 pcs. - Operating hours: 100,778 h – In automatic: 67,929 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany
Key data: 750 kN, 35 mm
Engel - Injection moulding machine e - Max - 310/75 ( No.:3 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 41,658,321 pcs. - Operating hours: 103,302 h – In automatic: 65,611 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany
Key data: 750 kN, 35 mm
Engel - Injection moulding machine e - Max - 310/75 ( No.:2 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 34,527,644 pcs. - Operating hours: 98,349 h – In automatic: 54612 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany
Key data: 750 kN, 40 mm
Engel - Injection Molding Machine e - Max - 310/75 ( No.:1 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 40 – diameter - Actual shot value: 40,069,660 pcs. - Operating hours: 105,347 h – In automatic: 63,211 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany
Key data: 120 kN, 186 g/PS, 35 mm
Awaiting refurbishment at our headquarters in Northamptonshire is this Engel Victory VC500/120 injection moulding machine. This is a tiebarless machine so offers great versatility in the mould shop. With direct lock, this machine is able to accommodate a large range of mould sizes making it an ideal choice for trade moulding or those with a large suite of tools. Engel offers very good support for this model, with spares and technological know how easily available. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign ...
Key data: 6500 kN, 90 mm
TECHNICAL SPECIFICATIONS: Clamping Force: 650 ton Shot Weight (Max): 2375 g Distance Between Tie-Bars (H): 1100 mm Distance Between Tie-Bars (V): 960 mm Platen Size (H): 1510 mm Platen Size (V): 1440 mm Screw Diameter: 90 mm Mould Height (Max): 950 mm Mould Height (Min): 450 mm Daylight Between Platens (Max): 1850 mm Opening Stroke (Max): 1400 mm Ejector Force: 9,50 ton Ejector Stroke: 250 mm Screw L/D Ratio: 25 Screw Speed: 190 rpm Screw Torque: 5000 N·m Injection Volume: 2610 cm³ Injection Pressure: 1583 bar Injection Rate: 751 cm³/s Nozzle Force (Max): 15 ton Nozzle Stroke (Max): 700 mm Plasticising Capacity: 123.50 g/s Heating Zones: 9 Heating Capacity: 46.40 kW
Key data: 700 kN, 35 mm
used injection moulding machines ENGEL VICTORY 200-70 Tech Stock No.: 503473 Manufacturer: ENGEL Type: VICTORY 200-70 Tech Control: CC100 Year of Make: 2004 Hours: 77192 h Technical data closing page Clamping force: 700 kN Panel size h x v: 670 x 420 mm Min. installation height: 150 mm Plate spacing max.: 600 mm Opening travel: 450 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 675 kg Technical Data Spray Side Screw diameter: 35 mm Displacement: 154 cc Spray pressure: 1600 bar Screw length: 20 l/d Screw speed: 400 min Plasticizing current: 21 g/s PS Outdoor injection flow: 151 g/s hp Number of heating zones: 4 Nozzle travel: 250 mm Dimensions & Weight Machine dimensions LxWxH: 4.4m x 1.5m x 2m Total Weight: 5200KG Equipment Screen text German Screentext English ...
Key data: 500 kN, 35 mm
Stock No.: 503475 Manufacturer: ENGEL Type: Victory 200-50 Tech Control: CC200 Year of Make: 2010 Hours: 41678 h Technical data closing page Clamping force: 500 kN Panel size h x v: 500 x 450 mm Min. installation height: 200 mm Plate spacing max.: 600 mm Opening travel: 400 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 600 kg Technical Data Spray Side Screw diameter: 35 mm Displacement: 135 cc Spray pressure: 1065 bar Screw stroke: 100 mm Screw speed: 480 min Outdoor injection flow: 204 g/s hp Number of heating zones: 4 Nozzle travel: 230 mm Dimensions & Weight Machine dimensions LxWxH: 3.35m x 1.3m x 1.8m Total Weight: 2900KG Equipment Screen text German Screentext English CEE socket 16A Core pull hydraulic 1x Machine with water battery Machine without materi ...
Key data: 500 kN, 25 mm
Injection moulding machines ENGEL VICTORY 200-50 Tech Stock No.: 503479 Manufacturer: ENGEL Type: VICTORY 200-50 Tech Control: CC300 Year of Make: 2021 Hours: 8286 h Technical data closing page Clamping force: 500 kN Panel size h x v: 500 x 450 mm Min. installation height: 200 mm Plate spacing max.: 600 mm Opening travel: 400 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 600 kg Technical Data Spray Side Screw diameter: 25 mm Displacement: 69 cc Spray pressure: 2090 bar Screw length: 25 l/d Screw stroke: 140 mm Screw speed: 480 min Worm torque: 240 N Injection flow to the outside: 104 g/s hp Number of heating zones: 4 Nozzle travel: 230 mm Dimensions & Weight Machine dimensions LxWxH: 3.4m x 1.3m x 2.17m Total Weight: 2900KG Equipment Sprue removal device include ...
Key data: 500 kN, 30 mm
Stock No.: 503478 Manufacturer: ENGEL Type: VICTORY 200-50 Tech Control: CC300 Year of Make: 2019 Operating hours: 14125 h Technical data closing page Clamping force: 500 kN Panel size h x v: 500 x 450 mm Min. installation height: 200 mm Plate spacing max.: 600 mm Opening travel: 400 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 600 kg Technical Data Spray Side Screw diameter: 30 mm Displacement: 99 cc Spray pressure: 1450 bar Screw length: 25 l/d Screw stroke: 140 mm Screw speed: 480 min Worm torque: 240 N Injection flow to the outside: 149 g/s hp Number of heating zones: 4 Nozzle travel: 230 mm Dimensions & Weight Machine dimensions LxWxH: 3.4m x 1.65m x 2.5m Total Weight: 2900KG Equipment Sprue removal device included Screen text German Screentext English C ...
Key data: 280 kN, 22 mm
Stock No.: 503476 Manufacturer: ENGEL Type: Victory 80-28 Tech Control: Year of Make: 2010 Hours: 35056 h Technical data closing page Clamping force: 280 kN Panel size h x v: 500 x 450 mm Min. installation height: 150 mm Plate spacing max.: 550 mm Opening travel: 400 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 450 kg Technical Data Spray Side Screw diameter: 22 mm Displacement: 38 cc Spray pressure: 1590 bar Screw length: 19 l/d Screw stroke: 100 mm Screw speed: 360 min Injection flow to the outside: 78 g/s hp Number of heating zones: 4 Nozzle travel: 230 mm Dimensions & Weight Machine dimensions LxWxH: 3.2m x 1.35m x 1.85m Total Weight: 2900KG Sprue removal device included Screen text German Screentext English CEE socket 16A Levelling elements Interface EU ...
Key data: 280 kN, 22 mm
Stock No.: 503477 Manufacturer: ENGEL Type: Victory 80-28 Tech Control: CC200 Year of Make: 2010 Hours: 39533 h Technical data closing page Clamping force: 280 kN Panel size h x v: 500 x 450 mm Min. installation height: 150 mm Plate spacing max.: 550 mm Opening travel: 400 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 450 kg Technical Data Spray Side Screw diameter: 22 mm Displacement: 38 cc Spray pressure: 1590 bar Screw length: 19 l/d Screw stroke: 100 mm Screw speed: 360 min Injection flow to the outside: 78 g/s hp Number of heating zones: 4 Nozzle travel: 230 mm Dimensions & Weight Machine dimensions LxWxH: 3.2m x 1.35m x 1.85m Total Weight: 2900KG Sprue removal device included Screen text German Screentext English CEE socket 16A Levelling elements Interfa ...
ENGEL victory 2050H/650V/350 Combi Year of Make: 2015 Control type: Engel CC 300 Operating hours: 31000 h 1.Injection unit Screw diameter: 70 mm Max. displacement: 1155 ccm Spec. Spray pressure: 1480 bar 2. Injection unit Screw diameter: 50 mm Max. displacement: 392 cc Spec. Spray pressure: 1280 bar Clamping unit Clamping force: 3500 kN Opening travel: 1640 mm Min. tool installation height : 550 mm Max. plate spacing: 1650 mm Mounting plates: 1200 x 1100 mm Accessories: Robot Viper 40 RC 300 Core Pull Ejector Side 2 x Core pull nozzle side 2 x Air core pull 2 x Tool heater 24 x Cascade control 8-way Robot Engel Viper 40 RC 300 Z – axis : 3320 mm X axis : 1200 mm Y axis : 1500 mm B – Axis : Servo + 90° - 180 ° C - Axis : Air 0 - 90°
ENGEL victory 1050/180 tech Year of Make: 2014 Engel CC 200 Control Operating hours: 34000 h Injection unit Screw diameter: 45 mm Injection weight in hp: 310 g Max. displacement: 341 cc Spec. Spray pressure: 2400 bar Clamping unit Clamping force: 1800 kN Opening travel: 750 mm Tool installation height min./max. : 500/750 mm Max. plate spacing: 1250 mm Accessories: Euromap 67 Robot Interface Hydr. Cascade 4 x Core Slide 3 x Tool heater 20-fold
Key data: 40 , 90 , 30
Injection molding machines in very good condition for sale Engel 200/40 TECH Year of production: 2007 Control system - CC 200 1. Capping unit: - Closing force: 400 kN - Plate dimensions: 550 x 430 mm - Minimum mold height: 180 mm - Maximum opening width: 530 mm 2. Injection Unit: - Screw diameter: 30 mm - Injection volume: 99 cm³. - Injection size: 91 г - Injection pressure: 1451 bar 3. Electro-hydraulic equipment: - Pump motor power: 15 kW 4. Dimensions and Weight: - Net weight with control cabinet: 2.7 т - Dimensions (L x W x H): 3.26 m x 1.2 m x 1.8 m
Currently undergoing the refurbishment process by our expert in-house team of engineers is this 2011, tie-bar-less Engel Victory 1050/220 Spex injection moulding machine, complete with full cell including Viper Robot and integrated Conveyor. Fitted with a 55mm plasticising unit. A very versatile machine with proven technology and good support from the people at Engel UK. Machines awaiting refurbishment can be reserved with a small deposit and the refurbishment is then prioritised and scheduled. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault fre ...
Angebot/Offer: Engel e-mac 310/75 >>>> Manufacturer: Engel >>>> >>>> Type: E-MAC 310/75 >>>> >>>> Serial No. 189970 >>>> >>>> Year: 2013 >>>> >>>> Controll Version: CC200 >>>> >>>> Clamping force: 75 ton >>>> >>>> Screw diameter: 35 mm >>>> >>>> Max volume: 154 cm3 >>>> >>>> Size of mould platens: 650x600 mm >>>> >>>> Mould opening stroke: 350 mm
ENGEL electric emax 200/100 (100 ton) injection molding machines -Year : 2008 & 2010 -Quantity : 2
ENGEL DUO2550/700 -Clamping force ; 700 ton -Screw diameter : 80mm -Manufactured year : 2014
used
Key data: 800 kN
Vertical injection moulding machine, clamping force max 800 kN, max. injection pressure 220.5 bar. Screw speed 48 - 480 rpm, rotary table, operating hours 47271, control CC200/EC200, weight 9,800 kg Auch + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827
Key data: 4200 kN
Machine in production !1
B&A REF: 8966 TON: 380 SHOT WEIGHT: 1190 SCREW DIAMETER: 70MM STROKE VOLUME: 1308CM3 INJECTION PRESSURE: 2400AR PLATEN SIZES: 1280 X 1280MM DBTB: 920 X 920MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: MM MOULD OPENING STROKE: 750MM MAX DAYLIGHT: 750MM EJECTOR STROKE: 700MM CONTROLS: CC 200 TOUCH AIR VALVES: 1 MOTOR: ELECTRIC HEATING CAPACITY: 44KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: ELECTRIC
used
B&A REF: 9017 TON: 180 SHOT WEIGHT: 360 SCREW DIAMETER: 50MM STROKE VOLUME: 392CM3 INJECTION PRESSURE: 2000AR PLATEN SIZES: 760 X 760MM DBTB: 520 X 520MM MIN MOULD HEIGHT: 250MM MAX MOULD HEIGHT: 600MM MOULD OPENING STROKE: 460MM MAX DAYLIGHT: 1060MM EJECTOR STROKE: 150MM CONTROLS: CC 200 AIR VALVES: 1 HEATING CAPACITY: 15.3KW ROBOT INTERFACE: EUROMAP 67
Key data: 800 kN
Engel e-motion 170/80 TL / New, unused production line with two robots Engel Viper 20 and Engel Viper 6 and an assembly line with optics / Electric machine Year of construction: 2020 Injection unit: Screw diameter: 30 mm Spraying weight: approx. 145 g Spray pressure: 2000 bar Dosing volume: 157 ccm Clamping unit : Clamping force: 80 t Tie bar spacing: 0x0 mm Size of clamping plates: 670x600 mm Ejector: hydraulic Clamping unit: toggle lever Control: CC 300 - Touchscreen Additional equipment: New, unused production line with two Engel Viper 20 and Engel Viper 6 robots and an assembly line with optics Tie-bar-less, electric machine: high-speed, energy-saving and very quiet Total number of operating hours: 0 h Euromap 67 Robot Interface Air Valves Air Core Pulls Control with hot runners x 20 Injection unit is wear-resistant and resistant to corrosion Central l ...
Key data: 800 kN
Engel e-victory 170/80 Ecodrive / production line with the robot Engel Viper 20 / hybrid machine Year of construction: 2017 Injection unit: Screw diameter: 30 mm Spraying weight: approx. 145 g Spray pressure: 2000 bar Dosing volume: 157 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 0x0 mm Size of clamping plates: 670x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 15,000 in automatic mode Total number of operating hours: 22,581 h Euromap 67 Robot Interface Air Valves Hydraulic core pull x 2 Control with hot runners Injection unit is wear-resistant and resistant to corrosion The clamping unit and injection unit are driven by servo motors Parallel Movements ...
Key data: 1000 kN
Engel e-motion 310/100 / Electric machine / production line with the Engel ERC 13/1-F robot Year of construction: 2007 Injection unit: Screw diameter: 30 mm Injection weight: approx. 102 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 0x0 mm Size of clamping plates: 810x690 mm Ejector: electric Clamping unit: toggle lever Control: CC 200 - Touchscreen Additional equipment: Machine in perfect technical condition, worked in clean production Tie-bar-less, electric machine: high-speed, energy-saving and very quiet Euromap Robot Interface Control with air valve Hydraulic core pull x 1 Control with hot runners Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Central lubrication The machine has been regularly serviced by the authorized service Engel Rob ...
Key data: 1000 kN
Engel Insert 80V/80V/100 2F/2-K Tie-bar-less machine, vertical / Perfect technical condition Year of construction: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Spray pressure: 1214 bar Dosing volume: 54 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 Additional equipment: Tie-bar-less machine with two vertical injection units, with rotary table Air valve x 6 Hydraulic core pull x 2 Hot runner control x 12 Infrared Protective Curtains Thermoplastic and rubber injection units are available for this machine Turntable diameter: 1200 mm The machine was regularly serviced by the authorized service Engel in Germany Metrics: Weight: 9400 kg Length/Width/Height: 4.85x1.47x2.30 m Drive: Pumps/motor: 30 kW All offered machines are started by our serv ...
