Key data: 1100 kN
Engel Victory 330/110 Tech / production line with the Engel ER-HLI 41 robot and conveyor belt / machine in very good technical condition Year of construction: 2004 Injection unit: Screw diameter: 40 mm Spray weight: 190 g Injection pressure: 1670 bar Dosing volume: 201 ccm Clamping unit: Clamping force: 110 t Tie bar spacing: 0x0 mm Size of clamping plates: 790x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: Production line with integrated Engel ER-HLI 41 robot and conveyor belt Tie-bar-less machine Hydraulic core pull x 1 Injection unit hardened - Bimetal Machine has been serviced by the authorized service Engel Machine with original protective housing for robot and conveyor belt Metrics: Weight: 7400 kg Length/Width/Height: 5.10x1.50x2.10 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.2 kW Total power: 2 ...
Key data: 1200 kN
Angel Victory 330/120 Tech / Production line with the robot Angel Viper 12 Year of construction: 2010 Injection unit: Screw diameter: 35 mm Spraying weight: approx. 140 g Spray pressure: 1595 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 120 t Tie bar spacing: 0x0 mm Size of clamping plates: 740x630 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - Touchscreen Additional equipment: Machine in perfect technical condition, worked in clean production Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Euromap Robot Interface Air valve x 2 Hydraulic core pull x 2 Hot runner control x 9 Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter Proportional valve on the injection unit – precise injection The machine has been regularly serviced by the authorized service Engel Del ...
Key data: 1800 kN
Engel Victory 200H/60W/180 combi / production line with the robot Engel Viper 20 Year of construction: 2015 Injection unit: Screw diameter: 22 mm Injection weight: approx. 54 g Spray pressure: 2392 bar Dosing volume: 61 ccm Clamping unit: Clamping force: 180 t Tie bar spacing: 0x0 mm Size of clamping plates: 1020x980 mm Ejector: hydraulic Clamping unit: toggle lever Control: CC 300 - Touchscreen Additional equipment: 2K machine with the original robot Engel Viper 20 Tie-bar-less machine, hybrid: energy-saving, high-revving and very quiet Operating hours: approx. 20,000 h in automatic mode Euromap 67 Robot Interface Air Valve x 4 Hydraulic Core Pull x 6 Hot runner control x 36 Reinforced Injection Units - Bimetal The second injection unit is angled, screw diameter fi 15 mm (18 cm³ / 2203 bar) Main Motors - 2 x Servo Motor Controlled with Inverter Proport ...
Key data: 1800 kN
Engel Victory 1060/180 Ecodrive / hybrid machine / operating hours: approx. 11,000 in automatic mode Year of construction: 2019 Injection unit: Screw diameter: 55 mm Injection weight: approx. 495 g Spray pressure: 2000 bar Dosing volume: 523 ccm Clamping unit: Clamping force: 180 t Tie bar spacing: 0x0 mm Size of clamping plates: 880x830 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 11,000 in automatic mode Total number of operating hours: 16,350 h Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 40 Injection unit is wear-resistant and resistant to corrosion The clamping unit and injection unit are driven by servo motors Proportional ...
Key data: 2600 kN
Engel Victory 1050/260 Tech Ecodrive / hybrid machine / operating hours: approx. 26,000 in automatic mode Year of construction: 2015 Injection unit: Screw diameter: 60 mm Spraying weight: approx. 580 g Spray pressure: 1725 bar Dosing volume: 608 ccm Clamping unit: Clamping force: 260 t Tie bar spacing: 0x0 mm Size of clamping plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 26,000 in automatic mode Total number of operating hours: 30,323 h Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 40 Injection unit is wear-resistant and resistant to corrosion The clamping unit and injection unit are driven by servo motors Propor ...
Key data: 2600 kN
Engel Victory 1050/260 Tech Ecodrive / hybrid machine / operating hours: approx. 24,000 in automatic mode Year of construction: 2015 Injection unit: Screw diameter: 60 mm Spraying weight: approx. 580 g Spray pressure: 1725 bar Dosing volume: 608 ccm Clamping unit: Clamping force: 260 t Tie bar spacing: 0x0 mm Size of clamping plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 24,000 in automatic mode Total number of operating hours: 29,433 h Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 40 Injection unit is wear-resistant and resistant to corrosion The clamping unit and injection unit are driven by servo motors Propor ...
Key data: 700 kN, 139 g/PS, 35 mm
Year of construction: 2002 Clamping unit - Clamping force: 700 kN - Tie bar width: tie-barless - Tool installation height 250/ 700 Injection unit - Shot weight (HP): 139 g - Screw diameter: 35 mm Pump running time - approx. 81,042 h Remark: - Dispensing without sprue picker and external Peripherals - VT card 2 defective General - 4 core pulls
Key data: 2200 kN, 535 g/PS, 55 mm
Injection moulding machine ENGEL Victory 1050-220 TECH Stock No.: 503439 Manufacturer: ENGEL Type: Victory 1050-220 TECH Control: CC100 Year of construction: 2006 Hours: 92465 h Technical Data Closing Page Clamping force: 2200 kN Plate size h x w: 860 x 830 mm Min. installation height: 300 mm Plate spacing max.: 1045 mm Aperture travel: 755 mm Ejector stroke: 180 mm Ejection force: 80 kN Centering movable plate D: 160 mm Centering fixed plate D: 160 mm Technical Data Spray Side Screw diameter: 55 mm Displacement: 510 cc Spray pressure: 1615 bar Auger length: 20 l/d Auger stroke: 200 mm Screw speed: 230 min Plasticizing Current: 55 g/s PS Outdoor injection flow: 255 g/s hp Number of heating zones: 5 Nozzle travel: 350 mm Dimensions & Weight Machine dimensions LxWxH: 6.2m x 1.7m x 2.2m Total Weight: 12900KG Equipment CEE socket 16A Compact Flash ...
Key data: 2200 kN, 40 mm
Injection moulding machine ENGEL VICTORY VC 650-150 Tech Stock No.: 503440 Manufacturer: ENGEL Type: VC 650-150 Tech Control: CC100 Year of construction: 2005 Hours: 92467 h We are pleased to introduce you to our used ENGEL VICTORY VC 650-150 Tech injection moulding machine. This high-quality machine has a 40mm screw and a clamping force of 1500 kN. Perfect for precision injection molding in a wide range of applications. Please note the increased minimum installation height of 395mm. Technical Data Closing Page Clamping force: 1500 kN Panel size h x v: 750 x 750 mm Min. installation height: 395 mm Plate spacing max.: 995 mm Aperture travel: 600 mm Ejector stroke: 150 mm Ejection force: 61 kN Centering movable plate D: 160 mm Centering fixed plate D: 160 mm Tool weight: 1800 kg Technical Data Spray Side Screw diameter: 40 mm Displacement: 251 ccm Injection ...
used
ENGEL 2k 200 ton year 2009 x 2 units. Used for handles of toothbrush
Inv. Num. : 7423 Type: ES 200/50 HL ST Producer: Engel Created: 1998 Parameters: Clamping force: 50 t Plate dimensions: 510x320 mm Injection weight: 4700 kg
Key data: 3000 kN, 850 g/PS, 70 mm
Engel ES 1350/300 HL Year of construction 2001 + 2003 Hours: 77623 h + 92737 h Clamping force: 300 tons. Screw diameter: 70 mm 4 core pulls incl. Wittmann removal robot
used
Screw diameter; 30 mm Injectable volume: 99 cm3 Injection pressure: 1450 bar Trays dimensions: 920 x 400 mm Minimum mould thickness: 190 mm max: 520 mm Opening stroke: 330 mm Cores: 3
Inv. Num. : 7200 Type: VC 80/25 TECH Producer: Engel Created: 2007 Parameters: Clamping force: 25 t Panel dimensions: 470 x 280 mm Clamping force: 250 kN Screw diameter: 22 mm Machine length: 2720 mm Machine width: 1030 mm Machine height: 1760 mm Injection weight: 1800 kg
Key data: 500 kN, 50 g/PS, 25 mm
Angel E-Max 200-50 (215) General information SKU: (215) Availability: In stock Year of construction: 2008 Brand: Angel Specifications Spray weight: 50 g Clamping force: 500 kN Stand: Used Screw diameter: 25 mm Injection pressure: 2400 bar Tie bar spacing: 320 x 370 mm Clamping plate size: 520 x 470 mm Tool installation height min.: 150 mm Control: LC 200 Language: English/ Swedish Power: 14 kW Hours: 37500 h Weight: 3400 kg Dimensions: 3.8 x 1.3 m Funnel: No Euromap: Yes Air Valve: Yes
Key data: 1000 kN, 198 g/PS, 40 mm
Angel E-max 440-100 (216) General information Item number: (216 MB) Availability: In stock Year of construction: 2009 Brand: Angel Specifications Spray weight: 198 g Clamping force: 1,000 kN Stand: Used Screw diameter: 40 mm Spray pressure: 2000 bar Tie bar spacing: 410 x 460 mm Clamping plate size: 650 x 600 mm Tool installation height min.: 150 mm Control: LC 200 Language: English,Swedish Power: 18 kW Operating hours: 36000 h Weight: 4400 kg Dimensions: 4.7 x 1.3 m Funnel: No Euromap: Yes Air Valve: Yes
Injection molding machine Engel ES 1350/250 HL ST with dryer
Key data: 1800 kN, 460 g/PS, 55 mm
ENGEL victory 1050/180 tech Year of construction: 2016 Control type: Engel CC 300 Operating hours: 14200 h in fully automatic mode Injection unit Screw diameter: 55 mm Injection weight in PS: 460 g Max. displacement: 510 ccm Spec. Spray pressure: 1615 bar Clamping unit Clamping force: 1800 kN Aperture travel: 750 mm Tool installation height min./max. : 500/750 mm Max. plate spacing: 1250 mm Accessories: Euromap 67 Robot Interface Ecodrive Bimetal cylinder Core pull 4 x Tool heater 8 x 2. Servo motor for parallel movement
ENGEL electric 180 ton (45mm screw) year `2014
ENGEL 50 ton machines. Year 2007, 2010, 2017 each 1 unit
Key data: 1800 kN, 460 g/PS, 55 mm
ENGEL victory 1050/180 tech Year of construction: 2016 Control type: Engel CC 300 Operating hours: 14200 h Injection unit Screw diameter: 55 mm Injection weight in PS: 460 g Max. displacement: 510 ccm Spec. Spray pressure: 1615 bar Clamping unit Clamping force: 1800 kN Aperture travel: 750 mm Tool installation height min./max. : 500/750 mm Max. plate spacing: 1250 mm Accessories: Euromap 67 Robot Interface Ecodrive Bimetal cylinder Core pull 4 x Tool heater 8 x 2. Servo motor for parallel movement
Key data: 500 kN, 88 g/PS, 30 mm
Clamping force:5,000 N Screw diameter:30 mm Total height:1,950 cm Total weight: 3,400 kg Spray weight: 88 g Total length: 4,500 cm Total width: 1,250 cm Displacement 98 cm³ Engine power 15 kW. Heating Capacity: 6.9 k W Ejector force: 2,540 N Ejector stroke: 100 mm Input power: 15 kW (20.39 hp) Panel width: 550 mm Panel length 320 mm Screw diameter 30 mm Displacement 98 cm³ Specific injection pressure 1450 bar Screw speed 20-480 1/MIN Heating capacity 6.9 kW Nozzle contact force 28 kN Opening travel 330 mm, Ejector travel 100 mm, Ejector force 25.4 kN Oil tank 160 L
Key data: 500 kN, 88 g/PS, 30 mm
Clamping force:5,000 N Screw diameter:30 mm Total height:1,950 cm Total weight: 3,400 kg Spray weight: 88 g Total length: 4,500 cm Total width: 1,250 cm Displacement 98 cm³ Engine power 15 kW. Heating Capacity: 6.9 k W Ejector force: 2,540 N Ejector stroke: 100 mm Input power: 15 kW (20.39 hp) Panel width: 550 mm Panel length 320 mm Screw diameter 30 mm Displacement 98 cm³ Specific injection pressure 1450 bar Screw speed 20-480 1/MIN Heating capacity 6.9 kW Cda3icllsq Nozzle contact force 28 kN Opening travel 330 mm, Ejector travel 100 mm, Ejector force 25.4 kN Oil tank 160 L
Key data: 3500 kN, 70 mm
warehouse no.: 503394 manufacturer: ENGEL type: ES 1800-350 HL controller: CC100 year of construction: 2004 operation hours: 69000 h clamping force: 3500 kN size of mould plates h x v: 1050 x 980 mm min. mould height: 350 mm max. open daylight: 1300 mm opening stroke: 950 mm screw diameter: 70 mm swept volume: 1039 ccm injection pressure: 1441 bar equipment included: screen text german machine incl. belt conveyor machine incl. Handling machine incl. safety fencing machine without material hopper Anti vibration mounts technical data robot-system: ENGEL ER-HLI 81 year of construction: 2004 measures of machine lxbxh: 7.98m x 2.22m x 2.57m total weight: 30750KG
Electric Injection Molding Machine ! Clamping unit Clamping force [kN] 600 Dimensions of mounting plates (hxv) [mm] 720 x 600 Injection Unit Screw diameter [mm] 35 Injection volume [cm3]: 154 Injection weight [g] 140 Injection pressure [bar] 2400 Dimensions & Weight Net weight with control cabinet [t] 5,7 Dimensions (L x W x H) [m] 4.7 x 1.4 x 2.7
Clamping unit Clamping force [kN] 2750 Dimensions of mounting plates (hxv) [mm] 1050 x 900 Min./ max. mould height [mm] min 350 Maximum opening width [mm] 1200 Injection Unit Screw diameter [mm] 55 Injection volume [cm3] 556 Injection weight [g] 130 Injection pressure [bar] 1763 Electrical-hydraulic equipment Pump motor rated power [kW] 37 Heater power [kW] 19,8 Dimensions & Weight Net weight with control cabinet [t] 19
Injection moulding machine ENGEL CL 2550/550 Year of production - 2005 Robot name – ENGEL ERC53/1-F Clamping force [tons]- 550 Maximum distance between plates [mm]-1650 Min. mould height [mm]-310 Max. mould height [mm]-800 Column spacing (mm) -915x860 Mounting plate size(mm)-1345x1280 Ejector stroke (max) [mm]-250 Screw diameter [mm]-80 Injection weight [g]- 1800 Oil quantity [liter]-1000 Mold Injection Sequence -2 Robot machine ready to work Number of hydraulic cores S/R- 1/1
Key data: 350 kN, 18 mm
Manufacturer: ENGEL, type Insert Insert 80H/35 Construction: Rotary table Clamping force: 35 t Year of manufacture: 2011 - neat condition, maintained, no oil leakage. Commissioning: 23.11.2011 Hours: 36,077 hours Injection unit: 18 mm Control: CC200
