Model
(Manufacturer: MAZAK)
Key data: 820 mm, 3048 mm
Mazak Integrex E-500H-ll x 3000 CNC Multitasking Turning/Milling Center CNC Control Mazatrol Matrix Dreg diameter 820 mm Turning length 3048 mm Spindle bore diameter 91 mm Spindle nose JIS A2-11 Speed 35 - 3500 rpm Milling head speed 5000 rpm X-axis travel 870 mm Travel Y-axis +250 / -250 mm Z-axis travel 3122 mm Travel B-axis -30/+210° C-axis indexing 350° Tool Cone Capto C8 Tools in Magazine 120 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.
Control Mazatrol Fusion 640 TN Turning diameter 180 mm Turning length 100 mm Travel X/Z 320 +560 / 280 mm Speed 7000 min-1 12-speed turret Conveyor Accessories:
MAZAK SQT 15MS CNC turning center built in 1992 in Japan, is the best choice for any manufacturing facility. All of this is due to the 12-position toolhead and two powerful spindles (main spindle and sub-spindle) that maximise turning efficiency while maintaining high accuracy and precision. There is also an easy-to-use MAZATROL T32-3 CNC controller with a colour screen through which all machining parameters are programmed in just a few steps. The total weight of the machine is 4700 kg. Technical specifications of the MAZAK SQT 15MS CNC lathe General data - feed rate in X/Z axis: 180/575 mm - maximum workpiece diameter: 300 mm - maximum workpiece length: 531 mm - bar diameter: 51 mm - X-axis positioning accuracy: ± 0.002 mm - Z-axis positioning accuracy: ± 7 s - C-axis positioning accuracy: ± 0.003 mm - tool clamping force: 42140 N - tool head indexing time: 1.4 s/full st ...
MAZAK MULTIPLEX 6100Y CNC turning center which was built in 2001 in Japan can fully automate the machining of workpieces with a maximum diameter of 500 mm, while maintaining high accuracy and precision. Turning takes place inside a large work space equipped with a rigid bed and a chip conveyor integrated into the coolant chute, designed to continuously evacuate the cuttings from the work area. In the machining process, the MAZAK CNC dual-spindle lathe uses tools housed in 12-position turret heads, distinguished by their reliable operation. Each of the two tool heads is 3-axis (X,Y,Z) and supports driven tools. In addition, to simplify and streamline turning, the workpiece can be machined on both spindles simultaneously and in link” mode, holding the bar in both chucks. The MAZAK ML TPLX 6100Y automatic lathe is also offered with a wide range of equipment, including the LNS QUICK ...
Key data: 710 mm, 510 mm, 510 mm
Inv. Num. : 7053 Type: FH-580/40 Producer: MAZAK Created: 1998 Parameters: Control system: MAZATROL M PLUS Work table length: 500 mm Work table width: 500 mm Minimum spindle speed: 12000 1/min X-axis travel: 710 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Cone: ISO 40 Max. tool diameter: 150 mm Max. tool length: 350 mm Max. tool weight: 12 kg Fast feed: 30000 mm/min Number of stacking positions: 60 Machine height: 2760 mm Machine length: 4700 mm Machine width: 2550 mm Machine weight: 10490 kg Equipment: Conveyor Cooler
Inv. Num. : 7106 Type: Variaxis 630 Producer: MAZAK Created: 2008 Parameters: Control System: Mazatrol Matrix Hours: 77450 h Work table length: 500 mm Work table width: 500 mm Number of synchronized axes: 5 pieces Maximum spindle speed: 12000 1/min X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 600 mm Cone: SK 40 Number of stacking positions: 80 Machine height: 3400 mm Machine length: 5500 mm Machine width: 4000 mm Machine weight: 7000 kg Equipment: Technical Documentation
Key data: 320 mm, 180 mm
Inv. Num. : 6708 Type: MultiPlex 6200II Producer: Mazak Created: 2015 Parameters: Control system: MAZATROL Matrix 2 Duty cycle: 47641 h Hours: 20759 h Maximum turning diameter: 320 mm Maximum turning diameter over bed: 320 mm Max. turning length: 180 mm Maximum main spindle power: 15 kW Maximum spindle speed: 5000 1/min Number of all tools: 24 pieces Max. rod diameter: 51 mm Number of spindles: 2 pieces Axis X: 230 mm Axis X2: 230 mm Z axis: 440 mm Axle Z2: 495 mm Weight: 7900 kg
Control model: T - I Distance between Centres: 3000mm Swing Over Bed: 840mm Tool Turret Vertical: 8 Tool Turret Horizontal on Saddle: 4 Diameter Forkardt Chuck: 610mm (3) x Fixed Steadies up to: 430mm Powered Tailstock Rear Swarf Conveyor Hydraulic Pack Spindle Motor and Transformer Machine photos : workdrive.zohoexternal.com/external/095d10894a930f82961d3848e923ca59ea 41ff8cb0da13021715cab758adfb2b
X-axis: 3000 mm Y-axis: 800 mm Z-axis: 720 mm Rapid traverse: X/Y/Z axis: 50m/min Control: SIEMENS 840D Recording: SK40 Speed: 18,000 rpm Mileage: total approx. 5,000 hours (of which approx. 500 hours since the overhaul) Spindle motor: 321V - 116 A Work table: W 3500 x L 820 mm Dimensions: L 5250 x W 4046 mm Drives: SIEMENS The machine is a 5-axis machine, where the turntable is both vertical, as well as horizontally. - Subject to technical errors and prior sale. -
Key data: 1300 , 1100 , 1000
CNC controller: MAZATROL 640M Axes X-axis travel mm: 1.300 Y-axis travel mm: 1.100 Z-axis travel mm: 1.000 B-axis degrees: 1º Feed rates m/min: 40 Rapid traverse m/min: 40 Worktable Number of pallets: 6 Table dimensions mm: 800x800 Maximum workpiece size (D x H) mm: ø1.250x1.250º Max. workpiece weight kg: 2.200 Spindle Spindle speed rpm: 35 - 15.000 Spindle drive power kW: 37/30 (30 min/cont) Spindle torque Nm: 104/84 (30 min/cont) Tool system Tool holder: MAS-BT50 Tool magazine slots: 240 Max. Tool Diameter With free neighboring places mm: ø260 With occupied neighboring places mm: ø135 Max. Tool Length mm: 500 Max tool weight kg: 30 Equipment Electronic Handwheel Chip conveyor Signal lamp High pressure pump Tool breakage probe Workarea light Spindle active cooling unit
Motorized lathe :::SPECIFICATIONS::: CNC Version: Mazatrol Matrix Nexus Main Spindle Nose: ASA 11 Main spindle power: 30Kw Main chuck chuck diameter: 350mm Main Spindle Bar Clearance: 102mm Turning diameter: 430mm Turning length: 1500mm Main spindle speed: 3300 Number of Tool Turrets: 1 Number of first turret tool slots: 12 Number of first turret motors: 12 First turret tool holder type: VDI 50 First Turret X-Axis Travel: 270mm First Turret Y-Axis Travel: 160mm First Turret Z-Axis Travel: 1625mm Rapid feeds for linear axes X Y Z: 33m/min Tailstock: Yes Chip conveyor: belt conveyor Presetting: yes Number of motorized tool holders supplied: 2+2 Self-centering bezel: yes Make and model of self-centering bezel: Autoblock mod. SLU-X-Z 3.1 Min Diameter - Max Diameter: 20-165mm Other technical data: Bezel NOT to follow ca ...
Mazak OPTIPLEX 3015 NEO 10kW Beam Shape Laser Cutting Machine + Automation Loading and Unloading System with 8 Regall Bearing Locations CST3015 Publisher: Mazak Type: OPTIPLEX 3015 NEO 10kW Beam Shape Year of construction: 11/2022 Commissioning: 05/2013 Condition: New, Exhibition Machine Availability: Immediately, by arrangement Operating hours (as of 01.2024): – CNC Power On Time approx. 636h – Laser Power On Time approx. 287h – Auto Operation Time approx. 60h – Auto Cutting Time approx. 19h – Cutting time approx. 17h Scope of delivery complete incl. installation and commissioning (Mazak Germany): – Basic machine with laser resonator Beam Shape CFX-10000 (10kW) – Built-in nozzle camera – Conveyor belt for material scrap – Zus. Laser protection screen (side 1) – Zus. Laser protection screen (side 2) – Oil mist mist – Roller lift table (ma ...
2006 Mazak FH-6800 Palletech CNC Horizontal Machining Center Pallet Size.. 24.8 x 24.8 TRAVELS X-Axis Travels... 41.3 Y-Axis Travels... 31.5 Z-Axis Travels... 34.7 Distance from Spindle Center to Top of Pallet. 3.9 - 35.4 Distance from Spindle Nose to Pallet Center. 5.9 - 40.6 WORKPIECE SIZE Maximum Table Load... 3,315 lbs. Maximum Workpiece Height. 39.4 Maximum Workpiece Diameter... 41.3 7,000 RPM Spindle Spindle Horsepower (15 Min/Cont). 40/30 HP Spindle Torque... 868 ft/lbs Obtains Full HP 243 RPM Constant Torque Range 35 - 243 RPM Spindle RPM.. 7,000 Spindle Speed Increment.. 1 RPM Number of Ranges. 4 (2 electric, 2 mechanical - automatically shifted) Tool Clamping Force.. 4,630 ft./lbs. Spindle Cooling System... Spindle Chiller AUTOMATIC TOOL CHANGER Magazine Capacity 120 Tool-to-Tool Time 1.8 seconds Chip-to-Chip Time (Approx.).. 5 seconds Maximum Too ...
Mazak Mold Maker 2500 Milling Machine :::SPECIFICATIONS::: CNC Model: Mazatrol CNC Version: PC FUSION CNC 640M Tool holder: ISO 40 Spindle speed: 12000 Number of tools: 24 X-axis stroke: 1020mm Y-axis stroke: 510mm Z-axis travel: 460mm Rapid feeds for linear axes X Y Z: 30m/min Guides: roller High refrigerant pressure: yes Portal type: Gantry with fixed upright moving table Chip conveyor: belt conveyor Presetting: yes
Manufacturer: MAZAK Type QT30 Built in 1998 Control Mazatrol T Plus Machine weight approx. 5100 kg x-travel 390 mm y-travel 1000 mm Turning diameter 510 mm Turning length 1000 mm Chuck diameter 210 Tool turret - Places 16 Spindle bore 71 mm
Key data: 3000 mm, 800 mm, 720 mm
Mazak VTC 800/30-SR CNC 5 (6) Axis Travelling Column Vertical Machining Center CNC control Mazatrol Matrix 2 Table size 3500 x 820 mm Table load 2500 kg Number of pallets 1 Travel X-Y-Z axis 3000 - 800 -720 mm C-axis (table rotation) 0.0001° B-axis travel ± 110° Spindle speed 35 - 18,000 rpm Spindle taper HSK-A63 Spindle motor 35-26 kW Magazine capacity 30 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.
Year 1.999 CNC MAZATROL FUSIÓN 640 M Table Surface 1.460 X 460 mm Max Weight Allowed on Table 800 Kg. Longitudinal Travel (X- Axis) 1.120 mm. Transversal Travel (Y-Axis) 510 mm Vertical Travel (Z- Axis) 510 mm. Min-Max. Distance Table to Nose Head 180 – 690 mm. Rapid Traverse (X,Y,Z Axis) 36.000 mm/min Max. Working Feed 20.000 mm/min Taper CAT-40 Spindle Speeds 10.000 rpm. Engine Power 15 Kw. Automatic Tool Charger INCLUDED Positions in ATC 24 Rigid Tapping INCLUDED Length Tool Measure INCLUDED Red Connection INCLUDED Hours On 18.200 h. Machine Weight 6.000 Kg.
Key data: 610 mm, 1080 mm
Stock number: 3860 CNC LATHE Manufacturer: Mazak , Type: Integrex 300 II SY Year of construction: 2002 Specifications: Max. circumferential diameter 610 mm dia. Max. turn. About Bed 610 mm Dia. Turning length 1080 mm Main motor power 26 kw Main spindle speed range 35-3500 rpm Spindle bore 65 mm dia. C axis - main spindle movement 0.001 degrees X axis movement 580 mm Z Ash Movement 1137 mm Y axis +/- 115mm mm B Axis Movement -30° to +195° Degree B axis spindle speed 10,000 per/min B axis spindles effect 15 B axis tool system KM 63 Z Aksen rapid traverse 30 m/min Counter spindle C Axis - Counter Pindle Movement 0.001 Degree Motor Power Counter Spindle 22 Kw Control Mazatrol PC-Fusion 640MT Fabr. Spindle operating hours 6483 hours Accessories: ATC Tool magazine with 80 stations Miscellaneous tools Cooling by spindle ...
CNC lathe MULTIPLEX 6200-II Manufacturer: Mazak Year: 2015 Control Mazatrol ... MATRIX 2 Turning diameter ... 320mm Rotation length... 180mm Counter spindle Spindle bore ... 51mm Machine weight... 7900kg L x W x H ... 3570x1795x2090mm Circumferential diameter above bed ... 320mm Spindle speed ... 1-5000rpm The machine is in good condition, possible to test under electricity.
Manufacturer MAZAK Model FJV 35-60 Year 2003 CNC MAZATROL FUSION 640M Table Table dimensions 2.240 x 750 mm. Max weight allowed on table 3.000 kg. Number a weight of T slots 5×18 mm. Distance between T slots 150 mm. Speed range 22 – 6.000 rpm Distance from table to floor 830 mm. Travels Longitudinal travel (X Axis) 2.000 mm. Cross travel (Y Axis) 800 mm. Vertical travel (Z Axis) 585 mm. Min-max dist. spindle nose to table 200-785 mm. Distance between columns 880 mm. Freeds Rapid feed X axis 24.000 mm/min. Rapid feed Y axis 32.000 mm/min. Rapid feed Z axis 18.000 mm/min. Max working feed 18.000 mm/min. Main spindle Spindle speed (min-max) 40-10.000 r.p.m. Speed ranges 2 Spindle taper ISO-50 Spindle power 40 HP Spindle torque 529 Nm Automatic tool changer (ATC) Tool taper CAT-50 ATC type Chain Change type Random shortest path Magazine capacity 30 Ma ...
Key data: 1120 mm, 510 mm, 510 mm
Machine Details Stock-No. 1105-03949 Type of machine Machining Center - Vertical Make MAZAK - CNC Type VTC 200 B Year of manufacture 2004 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time immediately Freight basis EX WORK Price Technical details X-Travel 1460 mm y-travel 510 mm Z-Travel 510 mm Additional information With CNC control Mazatrol PC Fusion CNC 640M, 30-fold tool changer, With CNC control Mazatrol PC Fusion CNC 640M, ATC for 30 tools Technische Daten / technical details: Travel X / X-Travel 1120 mm Travel Y / Y-Travel 510 mm Travel Z / Z-Travel 510 mm table size 1460x510 mm max. table load / max. workpiece weight 800 kg tool shank / spindle taper SK40 Spindle speed stepless 40-10000 rpm Number of tool places in ATC 30 max. tool Ø / max. tool Ø 80 mm ditto with free places besides 110 mm max. tool len ...
Mazak Machining Center V414 built in 1992, incl. tool holder. The machine was taken out of service 8 months ago and is currently not energized. Until then, the machine was fully functional. Costs for loading and transport are borne by the buyer.
Technical information Swing over bed 420 mm Distance centre tot centre 1000 mm Max longitudinal travel Z-axis 1028 mm Max cross travel X-axis 335 mm Spindle coneA2-6 Dia of spindle bore 56 mm Power on the spindle20/25 hp Number of speeds16 - 4000 rpm CommandMazatrol Cam T3 Total power needed18,5 kW - 32,9 kVa Length 3734 mm Width 1893 mm Height 2401 mm Weight 4400 kg Toolchanger yes Number of tools 16x - rotating yes milling tools C-axis Robo flex automatic loading system tooling included Measuring arm included MAZATROL CAM T-3 CNC Accessories Tailstock, Evoquator, Tool Attachments, Presetting Machine weight 4700 kg Axis C Yes
Key data: 720 mm, 1235 mm, 3300 1/min
Machine Details Stock-No. 1105-03948 Type of machine CNC Turning- and Milling Center Make MAZAK Type Quick Turn Smart 350 Year of manufacture 2012 Type of control CNC Storage location HAGUENAU Country of origin Japan Delivery time immediately Freight basis EXW (Incoterms 2000) loaded on Price Technical details turning diameter 420 mm turning length 1280 mm control MAZATROL SMART Dialog Swing Dia. 720 mm rapid power traverse in X-and Z direction 20 m/min Chucking diameter 250 mm Bar Material Dia. 102 mm Spindle Drive 30 kW Spindle Speed: 3300 spindle nose JIS A2-8 tailstock quill taper MT MK5 Tailstock Quill Stroke 110 mm tailstock quill diameter 100 mm Tailstock Travel 1300 mm total power requirement 50 kVA weight of the machine approx. 7 t dimensions of the machine approx. 4.5x1.7 m Accessories manual tool eye Additional information Machine IN GOOD C ...
Mazak machining center mod. FH 480 Year 1995 X = 560 Y = 560 Z = 510 Cutting speed 32,000 mm./min 12,000 rpm CNC Mazatrol M Plus
Inv. Num. : 7055 Type: MULTIPLEX 6100 Producer: MAZAK Created: 2006 Parameters: Control system: MAZATROL 640 T Duty cycle: 99006 h Maximum turning length: 700 mm Max. turning diameter: 230 mm Maximum spindle speed: 6000 1/min Spindle power: 7.5 kW Clamping diameter: 6 mm Rod diameter: 51 mm Travel X: 200 mm Travel Z: 365/420 mm Length: 3000 mm Width: 1650 mm Height: 2090 mm Weight: 6400 kg Equipment: Owner
MAZAK SUPER TURBO X510 Hi PRO Supercharged laser cutting machine manufactured in 1999 in Japan, is designed for precision cutting of sheet metal made of structural steel, stainless steel and aluminium. The compact design with high stability makes the machine ideal for small factories as well as for series production. The MAZAK SUPER TURBO-X510 Hi-PRO Supercharged laser cutting machine has a large work table with a length of 3050 mm and a width of 1525 mm on which ball supports are used to facilitate the loading and unloading of workpieces. Workpieces with a maximum thickness of 20 mm are machined with the utmost precision using a stable 2 kW laser beam, guaranteeing excellent machining results. The machine is equipped with, among others, a MAZATROL CNC controller and SiCam 14.10 software for programming the cut shapes and generating the necessary files. The total weight of the machine ...
MAZAK Laser Cutting Machine STX3015 4kW TOP CONDITION – OVERHAULED IN 2023 Year of construction: 10/2015 very well preserved, overhauled MAZAK laser machine with 4000W Panel format: 3000mm x 1500mm minimum installation area of 2.9m x 7.3m Small parts conveyor belt LAN/USB connection automatic nozzle change automatic focus position adjustment Quick piercing into thick materials Plasma sensor for stainless steel cutting Piercing sensor for piercing Burning sensor for monitoring when cutting structural steel Completely encapsulated machine cover no foundation necessary FE: up to 22mm VA: up to 15mm ALMG: up to 10mm Plastic possible incl. software incl. warranty incl. suction incl. commissioning + training =optional with fully automatic loading and unloading=
Machine Details Stock-No. 1105-03904 Type of machine Machining Center - Vertical Make MAZAK Type VCS 530 C II Year of manufacture 2014 Type of control CNC Storage location FRANCE Country of origin JAPAN Delivery time immediately Freight basis EX WORKS Technical details X-Travel 1740 mm Y-Travel 530 mm Z-Travel 510 mm control MATRIX 2 Table dimensions 2 350 X 500 mm distance spindle nose and table 180 - 690 mm distance spindle center to column: 610 mm table load 1200 kg Rapid Travel X/Y/Z 42 m/min feed range 1 - 8000 mm/min turning speed range: 40 - 12000 min-1 spindle taper CAT 40 tool magazine: 30 seats Tool diameter 80 mm Workpiece weight max. 8 kg tool length - max. 350 mm connected load 40 kVA voltage 400 / 50 V / Hz Additional information VERY NICE MACHINE WITH CONVOYER WITH CONTROL MAZAK MATRIX 2 COOLING TROUGHT THE SPINDLE
MAZAK HYPER GEAR 510 laser cutting machine manufactured in Japan in 2006, guarantees its user the highest quality laser cutting of workpieces with a maximum weight of 930 kg. The CO2 laser HYPERGEAR 510 has an indestructible construction made of the highest quality raw materials with a large working table, which ensures excellent rigidity and stability during machining. The laser cutting machine is equipped with a reliable PANASONIC YB-L400A8M5E laser source, which generates a 4 kW laser beam, as well as a large control panel with installed MAZATROL Preview CNC controller for controlling all machine functions. The MAZAK laser weighs 14800 kg. Technical data of the laser cutting machine MAZAK HYPER GEAR 510 - laser power: 4 kW - work table dimensions (L x W): 3000 x 1500 mm - feeds in X/Y/Z axis: 3070/1545/100 mm - maximum sheet metal weight: 930 kg - maximum sheet metal dimension ...
