38 offers

The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:

subcategories
(3rd category level)

 

thermoforming machines /Plate machines
Entry date: 12.08.2026
item-No.: 162750505

used

Fuego Plus UG
Location: Land-de

A deck press, also suitable for the production of armor plates also suitable for the production of armor plates Make: Becker&Van Hüllen Pressing force 5000 tons 10 floors heatable 3.0 meters x 1.30 meters Control New from Stadthagen

thermoforming machines /Thermo forming machines
Entry date: 03.06.2026
item-No.: 162747685
New in: 2020

used

Central-Tech Ltd
Location: 2890 Tata Land-hu
Price: 495.000 €

Rubber extrusion NBR&PVC Insulation sheet production line / available immediately The machine line can be delivered immediately, with few operating hours and in new condition. Bdeboy Exrpsmrc Ut Iec The units of the production line: 1. ¢150mm20D cold feed vacuum extruder(Standard) 2. Rubber sheet head(Pneumatic) 3. 6m infrared curing oven (width 1000mm) 4. 6m hot air curing oven(width 1140mm) 5. 6m hot air curing oven(width 1440mm) 6. 6m hot air curing oven(width 1600mm) 7. 6m hot air curing oven(width 1800mm) 8. 6m hot air curing oven(width 2000mm) 9. 6m hot air curing oven(width 2300mm) 10. 6m hot air curing oven(width 2500mm) 11. 6m hot air curing oven(width 2800mm) 12. 36m (in 3 layers12m) transmission & cooling system 13. Automatic sheet cutter & trimming machine (one) 2000 mm 14. One large Chiller with water tank 15. Gas heating 16. PLC If you are intere ...

thermoforming machines
Entry date: 24.05.2025
item-No.: 162710457
New in: 1965

used

Innovac GmbH
Location: Deutschland Land-de

Form dimensions X/Y: 475mm/250mm, max. material width: 495mm, max. infeed length: 280mm, max. negative draw depth: 100mm, max. roll diameter: 1200mm, max. material thickness: 2.3mm, max. cycle output: 48 cycles/min, forming output: approx. 6500 cups/min, machine dimensions X/Y/Z: approx. 5500mm/2200mm/2100mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.

thermoforming machines
Entry date: 24.05.2025
item-No.: 162710458
New in: 1975

used

Innovac GmbH
Location: Deutschland Land-de

An Illig thermoforming machine is available. Form dimensions X/Y: 500mm/380mm, max. film width: 540mm, draw depth range: -120mm/+120mm, max. feed length: 360mm, cycle rate: 30 cycles/min, punching area X/Y: 500mm/390mm, punching force: 50000daN, machine dimensions X/Y/Z: approx. 4500mm/2200mm/2200mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible.

thermoforming machines
Entry date: 25.04.2025
item-No.: 162707831
New in: 2010

used

GERMANPLAST SRL
Location: ponderano Land-it

AMUT - COMI FFG-760-ADV, Format area: mm. 750x550 (max. leaf width mm.900), Material: PET-PS-PP-PLA - XPS, Film thickness: mm. 0,2 - 2, Heaters: YES, Foil loading: automatic, Cycles/min: MAX AT EMPTY 60, ONE OWNER ONLY, Other details:, In production: yes, Can it be tested? yes, Availability to load it in a truck? Container?: price net of transport, machine loading and dismantling, Additional details:, 1.PRE-HEATING LEAF BLOWER ON SIDES FOR CHAINS, 2.ROBOT/MANIPULATOR AT END OF LINE WITH POSSIBILITY TO ROTATE FOR A/B TRAYS, 3.+ BASKET WITH BULKHEAD FOR CLASSIC EVACUATION, 4.LONG ROPE FOR EVAQUACING PRODUCTS, 5.CLOSING FORCE PRESS kN 300, 6.CLOSING FORCE CUTTING PRESS kN 600, 7.MAXIMUM LEAF WIDTH mm. 900, 8.MAXIMUM LEAF DIAMETER mm. 1200, 9.BOTH MACHINING OPERATIONS POSSIBLE (FORM AND DIE-CUT RESUMPTION / SIMULTANEOUS DIE-CUT FORM)

thermoforming machines
Entry date: 24.04.2025
item-No.: 162709966
New in: 2003

used

Samplast GmbH
Location: enger Land-de

Manufactured by Marbach, 77 mm cut dia. 14-Cavity Inclusive of stacker Parts For PP, PS Good Production Condition. EXW our Warehouse Enger, Germany

thermoforming machines
Entry date: 24.04.2025
item-No.: 162709967
New in: 1997

used

Samplast GmbH
Location: enger Land-de

Mold for Ø73 mm PP-Cups, 32 Cavities, Stacker Basket with Rods & Brushes & Rake, age May, 1997.

thermoforming machines
Entry date: 24.04.2025
item-No.: 162709968
New in: 2003

used

Samplast GmbH
Location: enger Land-de

Age 2003 Consisting of :- Driven Infeed Pinch Rollers Main Motor 20 kW Blower Motor 2 kW Rotary Blade 6pcs Stationary Blade 4pcs Through-Put 300 KG/H Cutting Chamber 620 x 460 mm Hopper Opening 620 x 500 mm, With Blower Good Production Condition. EXW our Warehouse Enger, Germany

thermoforming machines
Entry date: 24.04.2025
item-No.: 162709969
New in: 2005

used

Samplast GmbH
Location: enger Land-de

Age 2003 Consisting of :- Max. Infeed width 900 mm Throughput 500 Kg/ hr Main Motor 15kW Pendulum Roller for infeed tension control Dual Roll Ingfeed, Motor 0.75kW Regrind Outfeed Blower type F-25 , Motor 2.2 kW No. of Rotor Knives 3 No. of Stator Knives 3 Sound Proof Housing

thermoforming machines
Entry date: 24.04.2025
item-No.: 162709970
New in: 2007

used

Samplast GmbH
Location: enger Land-de

Age 2007, Consisting of :-, Siemens S7 PLC Controls Indramat Servomotor Siemens SINAMICS Motor Drive Rittal Control Cabinet Cooling Unit with Temperature Display With Snap -Stacking Brush Stacking Cascade Stacking The Counter/ Stacker is in v. good production, This ILLIG SZS73 was working Inline with a Generation 3 ILLIG RDM70K Line., Effective Working Area: 740 x 340 mm, Max. Part Height: 150 mm, Formed Part Stacking Length: 800 mm

thermoforming machines
Entry date: 18.03.2025
item-No.: 162718161
New in: 2004

used

Innovac GmbH
Location: Deutschland Land-de

Connected load: 104kVA, operational hours counter: 18,775h, the chain of the chain rail system was replaced in 2018.

thermoforming machines /Lamination machines
Entry date: 14.03.2025
item-No.: 162718586
New in: 2022

used

MachinePoint
Location: Land-es

Type Of Laminator: Solventless // Working Width: 1100

thermoforming machines /Lamination machines
Entry date: 14.03.2025
item-No.: 162718587
New in: 2014

used

MachinePoint
Location: Land-es

// Working Width: 1330 mm

thermoforming machines /Thermo forming machines
Entry date: 14.03.2025
item-No.: 162718588
New in: 2020

used

MachinePoint
Location: Land-es

Material : PP, PS, APET, CPET, PLA, OPS, EPS, PVC // Forming Area (Vxh): 780x570

thermoforming machines /Thermo forming machines
Entry date: 14.03.2025
item-No.: 162718589
New in: 2013

used

MachinePoint
Location: Land-es

// Forming Area (Vxh): 704x515

thermoforming machines /Thermo forming machines
Entry date: 14.03.2025
item-No.: 162718590
New in: 2010

used

MachinePoint
Location: Land-es

Material : PET-PS-PP-PLA - XPS // Forming Area (Vxh): 750x550

thermoforming machines /Thermo forming machines
Entry date: 14.03.2025
item-No.: 162718591
New in: 2016

used

MachinePoint
Location: Land-es

Material : PS, OPS, EPS, PP, PE, PVC, PET, PLA // Forming Area (Vxh): 760x540

thermoforming machines /Thermo forming machines
Entry date: 22.10.2024
item-No.: 162731136
New in: 1987

used

Gebr. Schwarte GbR
Location: Land-de
Price: VB 26.800 €

Vacuum forming machine for the production of PS, PVC, PET, blister, tray packaging. The thermoformer works separately forming and punching. The machine is in very good condition and was only used as a back-up machine for 16 years. It has been cleaned and extensively tested. so that it is immediately ready for use. Currently, a tool for trays in the size 125x176 mm is installed (forming tool 3-fold, negative, top), tool size approx. 188x408mm. We are also happy to put you in touch with a very good toolmaker who can produce format tools according to your wishes. Equipment of the machine: Moulding area 350 x 500 mm Film width max. 540 mm Moulded part height max. 100 mm positive - Top heating longitudinal row control - Underheating longitudinal row control - Strip steel cut heating - Forming station pneumatic, undertable as cooling plate - Needle chain transport with servo  ...

thermoforming machines /Thermo forming machines
Entry date: 27.09.2024
item-No.: 162731898
New in: 1999

used

MJS-LINE GmbH
Location: Land-ch

M. No.: 322 Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

thermoforming machines /Thermo forming machines
Entry date: 20.06.2024
item-No.: 162699755
New in: 2023

used

Hidrobrasil GmbH
Location: 45892 Gelsenkirchen Land-de

# HIDROBRASIL 50 T Heating Press with Sliding Table (600x600mm) If the press does not exactly meet your requirements, please request an individual offer exactly according to your wishes with one click: HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices! 50 T top piston heating press, in double column brackets suitable for continuous shift operation, with these basic data: - With a heating level - Idle speed up to 10 mm/sec (adjustable via rotary control) - Opening speed up to 40 mm/sec - Starting pressing speed 8 mm/sec - Table size/heating plate size 522 mm deep, x522mm wide - Plunger size/heating plate size 498 mm deep, x498mm wide - 2 heating plates, electrically heated, up to 200 degrees - Oil temperature monitoring - Circulating oil cooling on the hydraulics - Pressure Holding Valve 0 to 3600 sec - Pressure adjustment from  ...

thermoforming machines
Entry date: 29.02.2024
item-No.: 162687315
New in: 2023

new

IKG Industriekälte GmbH & Co. KG
Location: 74363 Güglingen Land-de
Price: 8.445 €

The ENR series are air-cooled chillers for industrial use for outdoor and indoor installation. The ENR 016 has axial fans, scroll compressors, internal P3 pump, condensers with finned aluminum fins and self-cleaning coaxial evaporator for maximum operational safety. Cooling capacity 13.5 Kw We have a lot of chillers available directly from stock used and new. contact us for a non-binding offer.

thermoforming machines /Thermo forming machines
Entry date: 18.12.2023
item-No.: 162692640
New in: 1992

used

MJS-LINE GmbH
Location: Land-ch

Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

thermoforming machines
Entry date: 04.09.2023
item-No.: 162329806
New in: 2000

used

MJS-LINE GmbH
Location: Land-ch

THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) M. No.: 403 Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 Tools: Item No. // Tool no. // Cavities // Machine 3589 // 458 // 12 // TFT 507 // 452 // 6 // TFT  ...

thermoforming machines /Thermo forming machines
Entry date: 27.07.2023
item-No.: 161944906
New in: 1988

used

MASZYNERIA SP. Z O.O.
Location: Land-pl
Price: 116.670 €

COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine was manufactured in Italy in 1988. The thermoforming line, consisting of, among others, a heating station, a bulge photocell and a moulded parts conveyor, is designed for the fully automatic production of oversized parts using the thermoforming method. The COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine is equipped with a gauge measuring the thickness of the platen in order to avoid accidentally taking two platens from the package at the same time. The platens, by means of transport grippers actuated by pneumatic cylinders, reach the individual work stations, i.e. the preheating station, consisting of two opposing panels, the plasticising preheating station and the forming unit. In the forming unit, the thermoforming process takes place, during which a BOTTINI GIANNI press with an upper and lower moving table peripherall ...

thermoforming machines /Thermo forming machines
Entry date: 21.05.2021
item-No.: 153054774
New in: 1988

used

MJS-LINE GmbH
Location: Land-ch

M. No.: 3284 Equipment / Additional information: (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe ...

thermoforming machines /Thermo forming machines
Entry date: 04.05.2021
item-No.: 152692900
New in: 2021

used

TechModus LT
Location: 09133 Vilniaus Land-de
Price: 10.000 €

complete set: DEMAG 50T ERGOTECH COMPACT 50-200 1999 (-) ENGEL 75T ES330/75 VICTORY 2001 (working hours 81694) working good tech. condition T557211 for both machines 10 000 EUR

thermoforming machines /Thermo forming machines
Entry date: 07.05.2024
item-No.: 162702480
New in: 1994

used

SAMPLAST GmbH
Location: 32130 Enger Land-de
VS

Used POLYTYPE BDM 501, 6-Color Round Cup Printer, age 1994 Consisting of :- Automatic Elevator Tray-feeder Cross Conveyor to main Print unit Universal screw Denester CUBITRON Corona Pretreatment System 8-mandrel Indexing Turret, with Mandrel Holders for Cups 6 x individually hinged dry-offset Print Heads Each Print Head consisting of Print cylinder, radial and axial Print adjustment with micro-register during operation of the Printer 2 x Form Rubber Rollers dia. 71 and 100 mm 2 x Oscillating rollers 2 x Idler Rollers 1 x Ink Transfer roller (Ductor Roller) 1 x Ink Fountain Ductor Rollers water cooled Ink Washing System on Print Heads UVITERNO Dual Lamp UV Curing-On-Mandrel Dual Belt Take-off with Air Assist Short conveyor to counter Stacker station Return Elevator Tray Feeder Max. Cup dia. 135 mm Max. Height of Cups 130 mm, Min. height of cups 35 mm Max. Printing ...

thermoforming machines /Thermo forming machines
Entry date: 07.05.2024
item-No.: 162702487
New in: 1999

used

SAMPLAST GmbH
Location: 32130 Enger Land-de
VS

POLYTYPE BDM 611/ 916, 8-Color Cup Printing Line, age 1999 Consisting of: Elevator Tray Feeder Cross Conveyor feeder Universal screw Denester ARCOTEC CG30 Corona Pretreatment System with Arcotec Leak Tester 8-mandrel Indexing Turret, with Mandrel Holders for Cups UVITERNO Model Mono-Jumbo 8015, 9 kW, UV Curing-On-Mandrel Positive Blow-off, final dual Timing Belt take-off Conveyor to counter Stacker station with Ejector Tray. Max. Cup dia.130 mm Min. Cup dia. 60 mm Max. Height of Cups 150 mm Min. height of cups 35 mm Max. Printing Length : 362 mm Taper 2 - 10 degs Max. speed depending on size & shape of Cups: 36,000/ hr Siemens S5 PLC Controls Siemens CORTOS OP25 display with Touch-pad Controls.

thermoforming machines
Entry date: 06.05.2024
item-No.: 162702570
New in: 2011

used

SAMPLAST GmbH
Location: 32130 Enger Land-de

Fully Automatic Superformer Sf1 Carton Erector + Inline Superliner SL220-PFF integrated Flap-Folder & Carton Liner, age Dec. 2011 : OK-Corp Superformer Sf1 Carton Erector + Inline Superliner SL220-PFF with integrated Carton top Flap Folder & PE Film Carton Liner from a Roll of Film,. Full Stainless Steel Construction, age Dec-2011. Automatically Erects Cartons, tapes the bottom, Lines the Cartons with film from a Roll. Speeds upto 15 Cartons per/ min Siemens S7 PLC Controls Max/ Min. Carton sizes: Case-sizes.png

thermoforming machines /Thermo forming machines
Entry date: 06.05.2024
item-No.: 162702584
New in: 2007

used

SAMPLAST GmbH
Location: 32130 Enger Land-de

ILLIG SZS73 Counter Stacker, age 2007 Effective Working Area: 740 x 340 mm Max. Part Height: 150 mm Formed Part Stacking Length: 800 mm Siemens S7 PLC Controls Siemens SINAMICS Motor Drives Rittal Control Cabinet Cooling Unit with Temperature Display. This ILLIG SZS73 was working Inline with a Generation 3 ILLIG RDM70K Line. With Snap -Stacking Brush Stacking Cascade Stacking The Counter/ Stacker is in v. good production Condition, it is clean and in a very good Optical condition as well

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)