Control: Bosch CC300 X: 4600 mm Y: 2000 mm Z: 3000 mm Table: 2000 x 2500 mm Max load on table: 25 t
Inv. Num. : 8023 Type: ECOCUT 1.3 Producer: Scharmann Created: 1981 Parameters: Control system: Siemens System 8 Y-axis travel: 1600 mm Travel Z axis: 1000 mm Travel W: 600 mm Spindle speed: 12-3000 1/min Spindle diameter: 125 mm Spindle power: 30/20 kW Cone: ISO 50 Equipment: Technical documentation
Complete system with all the accessories necessary for installation and operation, see below! x = 7000 y = 1600 z = 800 / w = 600mm General overhaul 2007, production year 1991: New Siemens Sinumerik 840D control system, new drive motors, guide guides renovated, new control cabinets. ECOCUT 1 was then operated for only a few months Rapid traverse 12000 mm / min / w axis 6000 mm / min Turntable TDV 2 max. workpiece weight 6t / clamping surface 1000x1000 Turntable TDV 3 max. workpiece weight 12t / clamping surface 1250x1600 Accessories: 2 angle milling heads / chain tool changing system / plate field / complete housing / Knoll hopper feeder / extraction / coolant system with belt filter. With all BWF fixators for the installation of machine bed and plate
Inv. Num. : 4003 Type: FB 100 S Producer: SCHARMANN Created: 1969 Parameters: Digital display range: NEVAL C 80 Digital Measurement: Rod Runner NEVAL Work table length: 1100 mm Work table width: 950 mm X-axis travel: 1000 mm Y-axis travel: 1045 mm Z-axis travel: 1000 mm Machine height: 2555 mm Machine length: 4285 mm Machine width: 2915 mm Machine weight: 17 t
Mobile milling machine for attachment, e.g. a lathe. As good as new, almost unused condition More data according to photos
SCHARMANN HEAVYCUT 2 WFT 150 CNC Floor type Boring Mill Year 1978 Spindle Diameter: 5.9 (150mm) Milling Spindle Diameter: 11.02 (280mm) Spindle Taper: CAT 50 Ram Cross Section: 11.81 x 11.81 (300x300mm) Vertical Head Travel, Y-Axis: 137.79 (3500mm) Column Travel, X-Axis: 712.59 (18000mm) Quill Travel, Z-Axis: 23.43 (595mm) Ram Travel, W-Axis: 27.6 (700mm) Z & W Axis, Combined: 51.03 (1296mm) Spindle Speeds: 5.5-1000 RPM Spindle Feed Range: 0.003-240 IPM Rapid Traverse: 396 IPM Spindle Motor: 70 HP/ 105 HP EQUIPPED WITH: Heidenhain TNC 407 CNC Controls Ram and Spindle Travel Sliding Way Covers On X-Axis Bed Right Angle Head With 1 Degree Manual Indexing Hardened Ways Re-pained recently
Scharmann boring mill Ecocut 1.1 TDV 3 / Retrofit in 2015, Year of construction 1983 / Retrofit 2015 by Scharmann Control Siemens 840 D, Travel X/Y/Z/W 2000/1450/1400/600 mm, Table clamping surface 120 x 1600 mm, Enclosure open at the top installed in 2015, Feeds up to 6 m/min, spindle speed up to 3,000 rpm - 30 KW, Machine does not need a foundation ! due to the self-designed polymer bed, max workpiece weight 12,000 kg, Machine weight 24,350 kg, complete documentation, Additional equipment: A CNC-controlled face plate is integrated in the drill quill. With this device, contours up to Ø600 can be rotated Services provided during retrofitting The machine was electrically and mechanically overhauled by Scharmann, most recently in 2015. During the overhaul, the entire electrical system was replaced and the control system was ...
Spindle diameter 75 mm x trail 1000 mm y way 1000 mm z axis 2380 mm W axis (spindle length) 500 mm Table: 900 x 710-360° mm Loading of the round table max. 1100 kg Output spindle speed 18 x 1400 RPM Spindle box drive 11/13 kW Rapid traverse 10 m / min Weight CCA 5 t L/B / H 3.8 x 1.8 x 2.6 m Control conventional control name conventional price includes loading on truck
Spindle diameter 120 mm X-axis 1200 mm Y axis 1200 mm Z axis 600 mm W axis 1000 mm Table load 6000 kg
Technical data: Table load: 20 to. Table length: 2,000mm Table width: 2,000mm Table height: 930mm Table shift: 1,500mm Total power: 8.1 kW
spindle diameter:160 mm x-travel:10000 mm y-travel:4000 mm dimension of the ram:325 x 325 mm w-axis:700 mm bore spindle stroke:800 mm V-axis:2000 mm B-axis (table):360° mm bore spindle turning speed range:10 - 1000 U/min spindle cone ISO:50 with CNC HEIDENHAIN TNC 430 rotary table 3000 x 2500 mm, 40 to. table load Angular Milling Head floor plates with T-slots
x-travel:2000 mm y-travel:1600 mm z-travel:1140 mm b-axis:0.0001° x 360° ° number of pallets:4 table surface area:1000 x 1450 mm max. table load:6.000 kg turning speed range:4 - 10000 U/min power capacity at 100 % load:40 kW kW tool taper:HSK100 DIN69893A machine weight ab.:63.000 kg space required L x W X H:12320 x 11000 x 4700 mm incl. 50 x HSK100 tool tapers
Manufacturer: Scharmann Model: FB 140 Condition: Used Type of Machine: Horizontal Table Boring Machine Plate Size: 1630 × 1300 Table Size: - Control System: Digital Display Spindle Hub: 140 Tool Holder Spaces: - Travel (X, Y, Z): 2000 × 1400 × 1400 Max Weight: 10000 kg Additional Notes: Equipped with Plan Disc Ø700. Find more here - / Contact us at -
x-travel: 4500 mm y-travel: 2800 mm weight of the machine ca.: 33 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 75 mm x-travel: 850 mm y-travel: 900 mm z-travel: 950 mm spindle taper ISO: SK 40 table-size: 1000 x 800 mm total power requirement: 16 kW weight of the machine ca.: 10,5 t dimensions of the machine ca.: 4,0 x 2,3 x 2,75 m Included - 3-axis digital display - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: . mm x-travel: 2500 mm y-travel: . mm : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 3000 mm width: 2000 mm number of T-slots: 7 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1600 y-travel: 1300 mm z-travel: 1450 mm Control: Siemens 840C Tool changer: 100pos number of spindle speeds: 10-4000U/min tool taper: Iso50 A-axis: -100°/+10° c-axis: 360.000° 0 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 80 mm x-travel: 1200 mm y-travel: 1000 mm z-travel: 815 mm Spindle travel: 450 mm spindle taper ISO: 40 Radial face slide diameter: 498 mm table surface area: 1000x800 mm digital readout: coolant: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 125 mm x-travel: 950 mm y-travel: 900 mm spindle taper ISO: 50 z-travel: 900 mm Table dimensions: 750x750 mm Radial face slide: 500 mm turning speeds: 15-855 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 80 mm x-travel: 1100 mm y-travel: 750 mm z-travel: 1350 mm surface area: 1000 x 1000 mm total power requirement: 6 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 5x3x3 m • 3-axis-D.R.O. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 130 mm x-travel: 2000 mm y-travel: 1400 mm z-travel: 1400 mm spindle taper ISO: 50 table surface area: 1000x800 mm table load: 12 t number of spindle speeds: 8-1650 U/min digital readout: total power requirement: 12 kW weight of the machine ca.: 9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 125 mm x-travel: 8000 mm y-travel: 3000 mm spindle bore: 240 mm w-axis: 1650 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 132 mm x-travel: 2000 mm y-travel: 1350 mm z-travel: 2340 mm table surface area: 2000x1500 mm spindle stroke: 1000 mm turning speeds: 3,5-1000 U/min Radial face slide: 600 mm Radial face slide: 3,5-100 U/min Feed: 2250 mm/min spindle taper ISO: 50 Table load: 15000 kg total power requirement: kW weight of the machine ca.: 24,5 t dimensions of the machine ca.: 6,3x5x3,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: . mm x-travel: . mm y-travel: . mm table length: 2000 mm table width: 2000 mm table load: 25 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 150 mm : 500 mm weight of the machine ca.: 0,75 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
