Schroeder-Combinator / scraped surface heat exchanger technical details: capacity/ flow rate: 20-100 ltr/h against 12 bar engine power: 3,5 KW dimensions: length x with x higth : 170 x 43 x 85 cm weight ca.: 150 kg with this device you can go with: hight viscosity and lumpy food for heating, cooling, mixing and pumping
Working width: 2550mm, max. sheet thickness: 3mm, cutting angle: 1.7°, stroke rate: 34/min, power: 4kW, weight: approx. 3000kg. The machine has been calibrated several times, but still has inaccuracies that cannot be rectified. Documentation available. On-site inspection is possible.
sheet width: 2540 mm plate thickness: 4 mm stroke: 250 mm total power requirement: 4 kVA weight of the machine ca.: 3720 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2540 mm plate thickness: 5 mm no. of strokes: 32 Hub/min table height: 820 mm total power requirement: 11 kW weight of the machine ca.: 4.440 kg dimensions of the machine ca.: 3360x1400x1440 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3020 mm plate thickness: 2,00 mm distance between columns: mm thickness - aluminium: 4,00 mm thickness at Niro-steel: 1,50 mm rear stop: 1000 upper beam stroke: 200 mm bending angle: 145 ° total power requirement: kW weight of the machine ca.: 4,00 t dimensions of the machine ca.: 4,30 x 2,60 x 1,90 m - Manual bending beam adjustment - Foot pedal - Total power requirement 32 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 2500mm, bending capacity: 3mm, connected load: 5kVA, weight: 3.5t.
Sheet thickness: 8,00 mm Folding length: 1250 mm Depth rear gauge: 1000 mm CNC Brand: _Unknown / Other CNC Model: POS 900 Make Schroder 8 mm Type MAK 4 / 1500 x 8.0 Year 1998 POS 900 - 1000 mm Sheet thickness (mm) T = 8.0 mm Folding length (mm) L = 1.520 Depth rear gauge (mm)X = 1.000Hydr. upper & lower beam Hydraulic top tool clamping 1 set tooling
sheet width: 2020 mm plate thickness: 2,00 mm distance between columns: 120 mm total power requirement: kW weight of the machine ca.: 2,00 t dimensions of the machine ca.: 3,00 x 2,00 x 2,00 m • POS 2000 2D graphic control • Positioning stop (incl. sheet support table) 130-1000mm with brushes • Bending rail 25mm • OW Geisfuss height approx. 90mm • Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1530 mm plate thickness: 4,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 1,25 t dimensions of the machine ca.: 2,10 x 1,85 x 1,20 m - controlled back gauge 750 mm - Continuous hold-down device with hard rubber strip - pneumatic sheet holding device - Rear area protection in accordance with the UVV safety package - POS 100 control - Extended, extendable support table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1020 mm plate thickness: 3,00 mm distance between columns: mm stroke: 120 mm total power requirement: kW weight of the machine ca.: 1,010 t dimensions of the machine ca.: 1,97 x 1,20 x 1,20 m • Sharpening rail • Bending rails 10 mm, 25 mm • Goats foot splint H 50 mm, length 745 mm. segmented • Manual backgauge • POS 400 control • Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1530 mm plate thickness: 2,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 0,840 t dimensions of the machine ca.: 1,90 x 1,30 x 1,20 m - manual back gauge 500mm - Hold-down device with hard rubber strip - Sheet metal holding device mechanically controlled to the rear including sheet metal slide - Rear area protection via light barrier The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3000 mm plate thickness: 2,5 mm distance between columns: 3200 mm Control: POS 800 total power requirement: 6 kW weight of the machine ca.: 4 t dimensions of the machine ca.: B3550x H1550x L2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: max. 1500 mm plate thickness: 2,5 mm serial number: 150393 weight: 1300 kg : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sheet thickness: 8,00 mm Folding length: 1250 mm Depth rear gauge: 1000 mm CNC Brand: _Unknown / Other CNC Model: POS 900 Make Schroder 8 mm Type MAK 4 / 1500 x 8.0 Year 1998 POS 900 - 1000 mm Sheet thickness (mm) T = 8.0 mm Folding length (mm) L = 1.520 Depth rear gauge (mm)X = 1.000Hydr. upper & lower beam Hydraulic top tool clamping 1 set tooling
