-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg
Inv. Num. : 8399 Type: QRM 300/4 Producer: SMERAL Generated: Parameters: Maximum sheet metal plate width: 300 mm Maximum sheet thickness when cutting: 4 mm Machine weight: 630 kg The straightening apparatus was completely repaired (rollers reground and new electrics).
Pressing force 250 t The dimensions of the desktop 1575 x 1150 mm Max. ram stroke 250 mm Stroke rate 20 /min Installation height 750 mm Plunger adjustment 100 mm Slab dimensions 1380x850 mm Main motor power 28 kW Machine dimensions L x W x H 2800x1240x4250 mm Machine weight 23400 kg
Inv. Num. : 7613 Type: QOPJ 250/ 1400 Producer: SMERAL Created: 1990 Parameters: Maximum sheet metal plate width: 250 mm Maximum sheet thickness: 2 mm Machine weight: 577 kg
SMERAL LZK 2500 Hot Forging press Fully refurbished in 2024 Capacity: 2500 Ton Speed: 65 SPM, continuous mode Ram/Slide Stroke: 320.00mm Ram/Slide Adjustment: 10.00mm Shut Height (Ram/Slide Down, Adjustment Up): 905.00mm Stroke of Upper Knockout: 50.00mm Stroke of Lower Knockout: 70.00mm Ram/Slide Width: 1320.00 mm Ram/Slide Height: 1100.00 mm Bed Width: 1340.00 mm Bed Depth: 1400.00 mm Power: 130kW Machine Length: 4055.00 mm Machine Width: 4000.00 mm Machine Height: 6710.00 mm Weight: 140000 kg Condition: like new refurbishing report: 1. Mechanical part • Complete disassembly of the press. • Measurement and troubleshooting of all parts. • The main parts of the press are tested (without destruction) in order to identify any defects. Frame: The frame was inspected and non-destructive testing of the most loaded areas was carried out. Damage to the table pl ...
Capacity: 1 200 T, Total stroke: 500 mm, Stroke of main crank shaft: 318 mm, Stroke of mobile die: 215 mm, Stroke/min: 27, Bar diameter: 50-90 (150) mm, Max diameter of peace: 152mm, Max weight of piece: 5 kg, Main motor power: 75 KW, Area of machine : 6400 x 4420 mm, Hight of machine: 3830 mm, Weight: 128.0 T
-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg
year 1985 Capacity 2500 / 2750 Ton 24900 / 27400 kN Speed 65 SPM, continuous mode Ram/Slide Stroke 12.60in, 320.00mm Ram/Slide Adjustment 0.39in, 10.00mm Shut Height (Ram / Slide Down, Adjustment Up) 35.60in, 905.00mm Stroke of Upper Knockout 2.00in, 50.00mm Stroke of Lower Knockout 2.80in, 70.00mm Ram/Slide Width 52.00 in, 1320.00 mm Ram/Slide Height 43.00 in, 1100.00 mm Bed Width 53.00 in, 1340.00 mm Bed Depth 55.00 in, 1400.00 mm power Existing Additional 28 Strokes per minute in manual mode, height shown is above floor, total height is 291 in ( 7390 mm), new quick change hydraulic type bolster Machine Length 160.00 in, 4055.00 mm Machine Width 157.00 in, 4000.00 mm machine height 264.00 in, 6710.00 mm Weight 320000 lbs, 145455 kg Condition Excellent Currently disassembled an ...
Inv. Num. : 6606 Type: LDC 250 Producer: SMERAL Created: 1980 Parameters: Compressive force: 250 t Maximum stroke rate upper table: 38 1/min Ram stroke: 200 mm Adjustment of the plunger: 120 mm
Inv. Num. : 4164 Type: LKT 250 Producer: SMERAL Created: 1977 Parameters: Pressing force: 250 t Table: 1575 x 1150 mm plunger stroke: 250 mm Stroke: 20/min Plunger adjustment: 100 mm Installation height: 750 mm Shock dimensions: 1380 x 850 mm Motor power: 28 kW Dimensions 2800 x 1240 x 4450 mm Machine weight: 23400 kg
Capacity: 1000 tons Stroke: 140 mm Table plate size: 910x920 mm Ram adjustment: 15 mm Main motor power: 28 kw Total power: 30 kW Dimensions (length x width x height): 2100x2500x4700 mm Height above floor: 3800 mm Total weight: 31000 kg
-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg
pressure: 63 t throat: 315 mm stroke: 10 - 105 mm no. of strokes: 71 - 140 Hub/min ram adjustment: 70 mm table size: 800 x 620 mm ram head dimension: 450 x 280 mm total power requirement: kW weight of the machine ca.: 5850 kg dimensions of the machine ca.: 1,425 x 1,79 x 2,55 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 t throat: 265 mm stroke: 8 - 95 mm table size: 660 x 520 mm ram head dimension: 400 x250 mm ram adjustment: 80 mm no. of strokes: 70 - 142 Hub/min total power requirement: kW weight of the machine ca.: 4500 kg dimensions of the machine ca.: 1,245 x 1,585 x 2,37 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 t throat: 225 mm stroke: 8 - 85 mm table size: 560 x 450 mm ram head dimension: 360 x 220 mm ram adjustment: 55 mm no. of strokes: 80 - 160 Hub/min total power requirement: kW weight of the machine ca.: 2500 kg dimensions of the machine ca.: 1,135 x 1,365 x 2,145 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 t throat: - mm stroke: 8 - 90 mm table size: 630 x 430 mm ram adjustment: 60 mm no. of strokes: max. 65 Hub/min total power requirement: kW weight of the machine ca.: 2480 kg dimensions of the machine ca.: m - tiltable - table mounting plate - mechan. Overload protection in plunger (break plate) - pneum. clutch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 t throat: - mm stroke: 8 - 90 mm table size: 630 x 430 mm ram adjustment: 60 mm no. of strokes: max. 65 Hub/min total power requirement: kW weight of the machine ca.: 2480 kg dimensions of the machine ca.: m - tiltable - table mounting plate - mechan. Overload protection in plunger (break plate) - pneum. clutch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 t throat: 400 mm stroke: 20 - 160 mm table surface area: 1200 x 800 mm ram adjustment: 100 mm no. of strokes: 60 Hub/min ram surface: 860 x 520 mm total power requirement: 15 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 1,7 x 2,5 x 3,23 m The machine should b partially overhauled new painting new seals The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
