Model
  • page

     1
  • Next
  • 2
  • 3
Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:
presses / Punching Machines
date: 21.10.2026
approved
dealer
item-No.: 162754269
New in: 1976 used
approved
Location: de

Key data: 250 t, 200 mm, 60 1/min

WEINGARTEN DE 250 Punching machines with conveyor system for sale. Table 2,000 mm x 1,200 mm

other machines and plants
date: 20.08.2026
approved
dealer
item-No.: 162750903
used
approved
Location: de

Weingarten Eccentric Press AV10 - With pliers feed - Reel and reel - When pressing, the speed can be set up with a frequency converter - Press force: 10 t - Stroke rate: 160 / min - Plunger stroke: 6-60 mm - Plunger adjustment: 40 mm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

presses / Crank Presses
date: 07.10.2026
approved
dealer
item-No.: 162750842
used
approved
Location: de

Offer is a Weingarten crank press Type. ZS 1600.32 ex location for sale. The technical data can be found in the photos.

presses / Crank Presses
date: 18.08.2026
approved
dealer
item-No.: 162749714
New in: 2001 used
approved
Location: de

Technical data Weingarten Mechanics Press 1600 to Nominal press force from 20 mm before UT 16000 kN Endurance stroke rate at idle infinitely variable 10 - 22 strokes/min Setup stroke number 5 - 10 stroke/min Plunger stroke 600 mm Maximum tool installation height 1200 mm Stroke at the bottom, adjustment at the top Minimum tool installation height 900 mm Plunger adjustability 300 mm Standard tool installation height (closed tool if power setup springs are present) 1150 mm Table top dimensions, length x width 3600 mm x 23 Plunger plates dimensions, length x width 3600 mm x 23 Passage between uprights in length 3650 mm Passage between the uprights in the width of 2300 mm Transfer height above press table 750 mm Quick Tension Plunger Plate: Swivel voltage, stationary 4 pcs. on each side Tool clamping flange thickness 70-0.2mm Clamping force  ...

presses / Crank Presses
date: 28.07.2026
approved
dealer
item-No.: 162749713
New in: 1999 used
approved
Location: de

Technical data Weingarten Mechanics Press 800 to Year of construction 1999 Nominal pressing force from 12.7 mm before UT 8000 kN Working stroke rate 10 - 40 strokes/min Setup stroke number 5 - 15 stroke/min Plunger stroke 200 mm Maximum tool installation height 1200 mm Stroke at the bottom, adjustment at the top Minimum tool installation height 900 mm Plunger adjustability 300 mm Standard tool installation height (closed tool if power setup springs are present) 980 mm Table top dimensions, length x width 3600 mm x 230 mm Plunger plates dimensions, length x width 3600 mm x 23 Passage between the uprights in length 3600 Passage between the uprights in width 2300 Standard infeed height above press table 750 mm Inlet height adjustment range 620 - 800 mm Quick Tension Plunger Plate: Hollow piston cylinder, variable 4 pcs. on each side Too ...

date: 14.05.2025
item-No.: 162712902
used
Location: nl

Key data: 80 t, 400 mm, 112 mm

Printing capacity: 80 ton Table surface: 750 x 550 mm Plunger adjustment: 80 mm Stroke length: 8 - 112 mm Stroke rate: 78 p/min. Projection: 400 mm Equipped with: - Air coupling - Safety screen Country of origin: Germany Motor power: Machine LxWxH: 2000 x 1200 x 2900 mm Machine weight approx.: 7000 kg

date: 17.11.2024
item-No.: 162729363
New in: 1963 used
Location: de
Price: 2.500 €

Single column - eccentric press WEINGARTEN type E 40 Masch. No. 643 / 62 Year of construction 1963 Pressure capacity 40 ton. Projection 250 mm Table opening 150 x 80 and Ø 200 mm Table area 560 x 460 mm Plunger area 250 x 200 mm Adjustable ram stroke 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100 / 130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 volts, 50 Hz Table height above floor 840 mm - Clutch-brake combination thanks to WEINGARTEN friction threaded clutch with OT flow protection - Electric stroke release via two-hand operation - Overload protection by crushing plate - Manual grease central lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirements L x W x H 1800 x 1500 x 2200 mm Weight 3.1 ton.

presses / Eccentric Presses
date: 26.08.2024
item-No.: 162698015
New in: 1975 used
Location: pl
Price: 43.455 €

WEINGARTEN DE 200-20 press built in 1975 in Germany is used for precision workpiece machining. The rigid construction combined with a high press force of 200 tonnes make the machine the perfect solution for mass production of various types of parts. The process of precision sheet metal pressing can be fully automated when the WEINGARTEN press is retrofitted with a sheet metal feeder. Technical specifications of the WEINGARTEN DE200-20 200 t press - press force: 200 t - maximum slider stroke: 200 mm - minimum slider stroke: 15 mm - maximum number of slider strokes: 60/min - minimum number of slider strokes: 20/min - slider adjustment: 110 mm

presses / Eccentric Presses
date: 26.03.2024
item-No.: 162685098
New in: 1971 used
Location: de
Price: 6.000 €

Eccentric press vineyard type AR160 tons With protective shield. YOC 1971 2 rotational speeds via mechanical gearbox Switchable. Central lubrication. Low-wear steep-threaded coupling. Table dimensions : 800x1000 mm Visits : possible at any time. Total weight approx. 10.5 tons

presses / Eccentric Presses
date: 09.10.2023
item-No.: 161183448
used
TOP SELLER
Location: de

Type / type: N 25 Year of make: 1977 Manufacturer / make: Weingarten Rated pressure: 25 t Number of strokes: 140 / min Radius slide center to frame: 200 mm Window in frame: 240 mm distance table slide: 250 mm Stroke adjustment / adjustment of stroke: 8 ... 80 mm Ram adjustability/adjustment of ram: 50 mm Ram size / surface of ram: 355 x 220 mm Table size / surface of bed: 560x 400 mm Hole in table: 160 mm Power of main motor:3 kW Weight / weight: 2,23 t

date: 16.10.2023
item-No.: 144479387
New in: 1978 used
Location: de

Weingarten Excenter Press

presses
date: 09.10.2023
item-No.: 123413738
used
Location: at

see picture in the appendix

presses
date: 23.06.2025
item-No.: 162706432
New in: 1970 used
Location: de

Press force: 125t, max. material thickness: 13mm, stroke rate: 44/66 strokes/min, ram stroke: 20mm-120mm, ram adjustment: 100mm, min. overall height X/Y: 300mm/400mm, max. overall height X/Y: 350mm/450mm, stopping time: 0.29s, safety distance: 390mm. On-site inspection is possible.

presses
date: 23.06.2025
item-No.: 162706434
New in: 1961 used
Location: de

Pressing force: 100t, max. sheet thickness: 12mm, stroke rate: 55/min, ram stroke: 8mm-112mm, ram adjustment: 80mm, installation height range: 355mm-407mm, stopping time: 0.33s, safety distance: 470mm. On-site inspection is possible.

presses
date: 23.06.2025
item-No.: 162708543
New in: 1970 used
Location: de

Press capacity: 30 ton Throat depth: 160 Ram stroke adjustable: 20 - 45 mm Slide adjustment: 10 / 60 mm Shut height (stroke down, adjustment up): 220 mm Table surface area : 470 x 300 mm Slide area: 250 x 190 mm Number of strokes: 80 - 240 s.p.m. Required power: 4 kW Dimensions L x W x H: 1.400 x 1.800 x 2.000 mm Weight of machine approx.: 2,67 ton

presses
date: 25.05.2025
item-No.: 162710282
New in: 1956 used

pressure:150 t throat:350 mm stroke:6 - 122 mm no. of strokes:45 /min distance table/ram, max. stroke up, adjustment up:440 mm table surface area:820 x 600 mm hole in the table:350 mm table height over floor:800 mm ram surface:500 x 350 mm ram adjustment:75 mm power requirement:10,0 kW weight:7,1 t dimensions (WxDxH):1,5 x 2,1 x 2,9 m

presses
date: 25.05.2025
item-No.: 162710283
New in: 1954 used

pressure:150 t throat:350 mm stroke:6 - 122 mm no. of strokes:45 /min distance table/ram, max. stroke up, adjustment up:440 mm table surface area:820 x 600 mm hole in the table:330 mm table height over floor:820 mm ram surface:500 x 350 mm ram adjustment:75 mm power requirement:10,0 kW weight:7,3 t dimensions (WxDxH):1,6 x 2,2 x 2,9 m

presses
date: 25.05.2025
item-No.: 162710284
New in: 1961 used

pressure:075 t throat:230 mm stroke:6 - 100 mm no. of strokes:105 /min distance table/ram, max. stroke up, adjustment up:354 mm table surface area:700 x 420 mm hole in the table:250 mm table height over floor:800 mm passage to the back:310 mm ram surface:264 x 270 mm ram adjustment:60 mm power requirement:5,5 kW weight:3,6 t dimensions (WxDxH):1,2 x 1,6 x 2,3 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1

presses
date: 25.05.2025
item-No.: 162710290
New in: 1961 used

pressure:063 t throat:280 mm stroke:8 - 100 mm no. of strokes:65 /min distance table/ram, max. stroke up, adjustment up:415 mm table surface area:620 x 500 mm hole in the table:230 mm table height over floor:800 mm ram surface:310 x 255 mm ram adjustment:63 mm power requirement:5,5 kW weight:3,95 t dimensions (WxDxH):1,2 x 1,8 x 2,4 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:mechanical

presses
date: 25.05.2025
item-No.: 162710293
New in: 1962 used

pressure:060 t throat:220 mm stroke:6 - 94 mm no. of strokes:115 /min distance table/ram, max. stroke up, adjustment up:340 mm table surface area:680 x 400 mm hole in the table:120 x 70 mm table height over floor:750 mm passage to the back:290 mm ram surface:240 x 240 mm ram adjustment:57 mm power requirement:3,7 kW weight:2,8 t dimensions (WxDxH):1,5 x 1,5 x 2,2 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic

presses
date: 25.05.2025
item-No.: 162710294
New in: 1962 used

pressure:080 t throat:300 mm stroke:8 - 112 mm no. of strokes:60 /min distance table/ram, max. stroke up, adjustment up:467 mm table surface area:710 x 560 mm hole in the table:240 x 115 mm table height over floor:800 mm ram surface:400 x 315 mm ram adjustment:80 mm power requirement:7,5 kW weight:5,1 t dimensions (WxDxH):1,4 x 1,9 x 2,7 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:mechanical

presses
date: 25.05.2025
item-No.: 162710307
New in: 1970 used

pressure:080 t throat:360 mm stroke:8 - 112 mm no. of strokes:78 /min distance table/ram, max. stroke up, adjustment up:467 mm table surface area:900 x 650 mm hole in the table:250 mm table height over floor:800 mm passage to the back:330 mm ram surface:650 x 400 mm ram adjustment:80 mm power requirement:11,0 kW dimensions (WxDxH):1,2 x 2,2 x 2,9 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:mechanisch

presses
date: 25.05.2025
item-No.: 162710325
New in: 1960 used

pressure:500 t distance between columns:2400 mm stroke:400 fix mm no. of strokes:13 - 23 /min Distance table/ram, max. stroke up, adjustment up:1600 mm table surface area:2300 x 1800 mm column travel -side:1600 mm ram surface:2170 x 1800 mm ram adjustment:300 mm total power requirement:110,0 kW Weight:135,0 t Dimensions (WxDxH):3,35 x 4,85 x 7,0 m clutch:pneumatic overload protection in ram:hydraulic ram adjustment:motoric

presses
date: 25.05.2025
item-No.: 162710342
New in: 1970 used

Pressure:063 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 /min distance table/ram, max. stroke up, adjustment up:415 mm table surface area:700 x 500 mm hole in the table:250 mm table height over floor:800 mm passage to the back:320 mm ram surface:450 x 280 mm ram adjustment:63 mm weight:4,5 t Dimensions (WxDxH):1,6 x 2,0 x 2,8 m overload protection in ram:mechanical

presses
date: 25.05.2025
item-No.: 162710358
New in: 1964 used

pressure:063 t throat:250 mm stroke:8 - 100 mm no. of strokes:56 / 84 /min distance table/ram, max. stroke up, adjustment up:415 mm table surface area:710 x 500 mm hole in the table:320 mm table height over floor:800 mm passage to the back:320 mm ram surface:450 x 280 mm ram adjustment:63 mm weight:4,1 t dimensions (W x D x H):1,35 x 2,0 x 2,6 m overload protection in ram:mechanical

presses
date: 23.06.2025
item-No.: 162710721
New in: 1976 used
Location: de

Pressing force: 400t, table length: 890mm, table width: 780mm, stroke: 180mm, ram stroke: 30-300mm, ram adjustment: 125mm, stroke rate: 55/min, safety distance: 400mm, drive power: 15kW. Machine dimensions X/Y/Z: approx. 2800mm/1000mm/3000mm, weight: approx. 14000kg.

presses
date: 23.06.2025
item-No.: 162710733
New in: 1975 used
Location: de

A Weingarten single-column eccentric press is available. Press force: 200kN, stroke rate: 40rpm, throat: 550mm, rear-front passage: 800mm, table ram distance: 400mm, ram stroke: 40mm-180mm, ram adjustment: 110mm, ram dimensions X/Y: 1200mm/800mm, table dimensions X/Y: 1200mm/1000mm, mortise diameter: 50mm, mortise depth: 85mm, motor power: 15kW, machine weight: approx. 13200kg. On-site inspection is possible.

presses / Punching Presses
date: 23.06.2025
item-No.: 162705377
New in: 1977 used

pressure: 25 t throat: 200 mm stroke: mm pressure: 25 t no. of strokes: 140 Hub/min window in frame: 240 mm adjustment of stroke: 8...80 mm ram - range of adjustment: 50 mm surface of ram: 355 x 220 mm table-size: 560 x 400 mm hole in table: 160 mm total power requirement: 3 kW weight of the machine ca.: 2,23 t dimensions of the machine ca.: m - distance table slide: 250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

other metal working machines
date: 23.06.2025
item-No.: 162714149
New in: 1978 used

Müller/ Weingarten Find more here - / Contact us at -

date: 24.05.2025
item-No.: 162711351
New in: 1962 used
Price: 9.800 €

Single column - eccentric press WEINGARTEN type EV 63Masch. No. 738 / 61 Year of construction 1962Pressure capacity 63 ton. Projection 260 mmTable surface 630 x 530 mmTable opening 210 mmPlunger area 315 x 260 mmPlunger stroke adjustable 8-100 mmPlunger adjustment 63 mmInstallation height max 450 mmStroke rate 115 strokes / min. Compressed air requirement min. 4.5 barMotor power 4 kWNetz connection 380 volts, 50 HzTable height above floor approx. 750 to 900 mm- Electrical stroke release via foot switch or two-hand operation-

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)