Model
(Manufacturer: WEINGARTEN)
Single-column eccentric press WEINGARTEN type ARP 100Masch. No. 122481 year of construction 1984Pressure capacity 100 ton. Projection 400 mmTable size 920 x 660 mmPlunger area 700 x 450 mmRear stand width 735 mmStroke adjustment 20 - 160 mmPlunger adjustment 80 mmInstallation height at 160 mm stroke max. 355 mm (without table intermediate plate)Installation height at 20 mm stroke max. 425 mm (without table intermediate plate)Stroke rate 60 strokes/min. Table surface table intermediate plate 920 x 610 mmPlate thickness table intermediate plate 90
Single-column eccentric press WEINGARTEN type E 40Masch. No. 643/62 Year of construction 1963Pressure capacity 40 ton. Projection 250 mmTable opening 150 x 80 and 200 mmTable area 560 x 460 mmPlunger area 250 x 200 mmPlunger stroke adjustable 8-88 mmPlunger adjustment 63 mmInstallation height 320 mmPin hole 40 mmStroke rate 100/130 strokes / min. Motor power 2.2 / 3 kWNetz connection 400 volts, 50 HzTable height above floor 840 mm- Clutch-brake combination by WEINGARTEN friction threaded coupling with TDC
There are two identical eccentric presses available, nominal force: 1000kN, stroke speed: 30-85/min, stroke adjustment: 20-125mm, weight: 8t, year of construction machine 1/ 2: 1978/ 1981, with documentation.
Stroke speed: 57-86/min, ram adjustment: 63mm, including documentation.
Weingarten AR 63 ton Capacity: 63 ton Max adjustable stroke: 8 > 100 mm Drawning speed: 56/84 str/min Dimension of the table: 620 x 500 mm Dia table hole: 250 mm Punchholder dia: 40 mm Course adjustment: 63 mm Weight: 4 ton
pressure: 25 t throat: 220 mm stroke: 8-80 mm dayligth: 355 mm no. of strokes: 140 Hub/min ram adjustment: 50 mm ram surface: 220x180 mm table surface area: 160 mm hole in the table: 90 mm total power requirement: 7,5 kW weight of the machine ca.: 2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 415 mm stroke: 8-140 mm no. of strokes: 48 Hub/min ram - range of adjustment: 80 mm table surface area: 920x670 mm ram surface: 700x450 mm table height: 800 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 1500x2000x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 315 mm stroke: 8 - 112 mm table surface area: 725 x 570 mm ram surface: 410 x 315 mm ram adjustment: 80 mm no. of strokes: 55 / 82 Hub/min tool shank hole (depth x diameter): 85 x 50 mm dayligth: 355 mm total power requirement: 7,5 kW weight of the machine ca.: 6 t dimensions of machine L x W x H: 2,00 x 1,00 x 2,87 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Single column - eccentric press WEINGARTEN Type E 40 Masch. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. Projection 250 mm Table opening 150 x 80 and 200 mm Table area 560 x 460 mm Plunger area 250 x 200 mm Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Pin hole 40 mm Stroke rate 100/130 strokes / min. Engine power 2.2 / 3 kW Mains connection 400 volts, 50 Hz Table height above floor 840 mm - Clutch-brake combination by WEINGARTEN friction threaded coupling with OT flow protection - Electric stroke release via two-hand operation - Overload protection by crushing plate - Manual grease central lubrication - Front crankshaft support bearing - Control cabinet adjacent- UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 ton.; used
Single Column - Eccentric Press WEINGARTEN Type ER 63 Masch. No. 52A / 63 Year of construction 1963 Pressure capacity 63 ton. Projection 280 mm Table surface 630 x 530 mm Ram stroke adjustable 8-100 mm Ram adjustment 63 mm Stroke rate 65 strokes / min. Engine power 4 kW mains connection 380 Volt, 50 Hz - Clutch-brake combination by WEINGARTEN friction threaded clutch - Electrical stroke release via foot switch - Wheel countershaft - Overload protection by crushing plate - Front crankshaft support bearing Space requirement L x W x H 1500 x 1100 x 2500 mm Weight 4.5 ton. good condition; used
Single column - eccentric press WEINGARTEN Type ERV 40 Masch. Nr. 537 / 65 Year of construction 1965 Compressive force 40 ton. Projection 230 mm Table size 570 x 470 mm Plunger area 250 x 200 mm Clamping pin hole 40 mm Installation height max. approx. 520 mm stroke adjustment 8 - 88 mm plunger adjustment range 63 mm stroke rate 70 strokes per minute drive power 3 kW mains connection 380 volts, 50 Hz - table height adjustment - overload protection by crushing plate - clutch-brake combination by WEINGARTEN friction threaded coupling - electric 2-hand control and foot switch - central lubrication via hand pump space requirement L x W x H 1600 x 1150 x 2300 mm Weight approx. 2.6 ton.; used
pressure: 25 t throat: 220 mm stroke: 8 - 80 mm mm total power requirement: 2,2 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 0,9 x 1,5 x 2,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Single-column eccentric press WEINGARTEN Type ER 63 Masch. No. 52A / 63 Year of construction 1963 Pressure capacity 63 ton. Projection: 280 mm, table surface: 630 x 530 mm, ram stroke adjustable: 8-100 mm, ram adjustment: 63 mm , stroke rate: 65 strokes / min. Motor power 4 kW Mains connection 380 volts, 50 Hz - Clutch-brake combination by WEINGARTEN friction threaded coupling - Electric stroke release via foot switch - Wheel counterweight - Overload protection by crushing plate - Front crankshafts Support bearing Space requirement L x W x H 1500 x 1100 x 2500 mm Weight 4.5 ton. good condition; used
pressure: 100 t throat: 415 mm stroke: 8-140 mm no. of strokes: 48 Hub/min ram - range of adjustment: 80 mm table surface area: 920x670 mm ram surface: 700x450 mm table height: 800 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 1500x2000x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Single Stand - Eccentric Press WEINGARTEN Type ERV 40 Masch. No. 537 / 65 Year of construction 1965 Compressive force 40 ton. Projection 230 mm Table size 570 x 470 mm Ram surface 250 x 200 mm Clamping pin bore 40 mm Installation height max. approx. 520 mm Stroke adjustment 8 - 88 mm Ram travel 63 mm Stroke rate 70 strokes per minute Drive power 3 kW Mains connection 380 Volt, 50 Hz - Table height adjustment - Overload protection by crushing plate - Clutch-brake combination by WEINGARTEN Friction threaded coupling - electric 2-hand operation and foot switch - Central lubrication via hand pump Space requirement L x W x H 1600 x 1150 x 2300 mm Weight approx. 2.6 ton.; used
pressure: 25 t throat: 220 mm stroke: 8-80 mm dayligth: 355 mm no. of strokes: 140 Hub/min ram adjustment: 50 mm ram surface: 220x180 mm table surface area: 160 mm hole in the table: 90 mm total power requirement: 7,5 kW weight of the machine ca.: 2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 t throat: 440 mm stroke: 20 - 120 mm table surface area: 1050 x 750 mm no. of strokes: 42 u. 62 Hub/min ram surface: 800 x 500 mm tool shank hole (depth x diameter): 85 x 50 mm hole in the table: 355 mm weight of the machine ca.: 11,2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 150 t throat: 550 mm stroke: 10 - 140 mm table surface area: 1180 x 980 mm no. of strokes: 40 Hub/min dayligth: 500 mm ram surface: 1040 x 800 mm ram adjustment: 70 - 150 mm tool shank hole (depth x diameter): 435 x 55 mm required power: 15 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 3 x 1,7 x 3 m - with additional brake - slide weight compensation - motorized slide adjustment - central grease lubrication (manual) - table mounting plate - safe for manual inlay work The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 t throat: 440 mm stroke: 20 - 180 mm table surface area: 1200 x 800 mm hole in the table: 450 mm ram adjustment: 110 mm tool shank hole (depth x diameter): 65 x 110 mm distance table/ram: 400 mm dist. between columns - front to rear: 800 mm total power requirement: 15 kW dimensions of the machine ca.: 1,82 x 2,4 x 3,72 m weight of the machine ca.: 15,6 t ram surface: 750 x 520 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3100 mm total power requirement: 12 kW weight of the machine ca.: 15 t dimensions of the machine ca.: 4 x 2,5 x 2,7 m Machine was complete reconditioned in 1987. Original Year of manufacture is 1958. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 300 mm stroke: 8-112 mm no. of strokes: 60 Hub/min ram adjustment: 80 mm table surface area: 700x550 mm ram surface: 400x300 mm table height: 870 mm hole in the table: Ø 280 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,0 t dimensions of the machine ca.: 1500x2000x2700 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 125 t throat: 330 mm stroke: 20-120 mm no. of strokes: 50 Hub/min ram - range of adjustment: 100 mm table surface area: 800x640 mm ram surface: 500x400 mm hole in the table: Ø 330 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: 1500x2000x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 t throat: 340 mm stroke: 20-120 mm no. of strokes: 45 Hub/min ram - range of adjustment: 100 mm table surface area: 800x620 mm ram surface: 500x400 mm hole in the table: Ø 360 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 2200x2000x3600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 300 mm stroke: 8-112 mm table surface area: 700x550 mm ram surface: 390x300 mm hole in the table: Ø 260 mm weight of the machine ca.: 7 t dimensions of the machine ca.: 1500x1900x2800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 410 mm stroke: 8-112 mm no. of strokes: 55/82 Hub/min ram - range of adjustment: 80 mm table surface area: 950x700 mm ram surface: 700x450 mm hole in the table: Ø 280 mm table height: 800 mm total power requirement: 11 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: BxTxH 1600x2200x3000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 320 mm stroke: 8-112 mm no. of strokes: 60 Hub/min ram - range of adjustment: 80 mm : 355 mm table surface area: 720x550 mm ram surface: 400x310 mm sheet thickness - max.: 11 mm weight of the machine ca.: 9,5 t Overall size: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 280 mm stroke: 8-100 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm table surface area: 620x500 mm ram surface: 310x260 mm hole in the table: Ø 250 mm table height: 850 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 4 t dimensions of the machine ca.: 1200x1900x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 260 mm stroke: 8-100 mm ram - range of adjustment: 63 mm no. of strokes: 115 Hub/min : 316 mm table surface area: 630x490 mm ram surface: 315x260 mm hole in the table: Ø 140 mm total power requirement: 4 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 500 t distance between columns: 1600 mm stroke: 60 mm max. ram stroke: 60 1 / min ram adjustment: 100 mm total power requirement: kW weight of the machine ca.: 40 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 400 mm stroke: 8-112 mm ram adjustment: 80 mm no. of strokes: 52/78 Hub/min table surface area: 750x550 mm ram surface: 400x300 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
