47 offers

Manufacturer:
Manufacturer:
Your found location: Latitude 0.0 + Longitude 0.0
Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:
presses / Bending Presses
01.10.2026
item-No.: 162745838
New in: 2010

used

Location: Land-de

Press brake Amada Astro HDS 1030 / NTR BJ 2010

presses / Bending Presses
01.10.2026
item-No.: 162748371
New in: 2013

used

Location: Land-de

Press brake Amada Astro II BJ 2013

presses / Bending Presses
27.05.2025
item-No.: 162732377
New in: 2001

used

Location: Land-cz

Control Thrust... 80t Bending length ... 2620mm controlled axes ... 4 Plunger stroke... 200mm Machine weight ... 5750kg The machine is in good condition, possible to test under power.

presses / Bending Presses
14.10.2026
approved
dealer
item-No.: 162753830
New in: 1991

used

check
Location: Land-de

Offer 26338 Technical data: - max. Working length 3340 mm - Column passage 2600 mm - Max. pressing force 100 t - Projection 400 mm - Max. stroke 100 mm - max. Installation height 370 mm - Table height approx. 960 mm - Feed speed / rapid traverse 85 mm/s - Press speed 10 mm/s - Retraction speed 80 mm/s - Drive power 9.5 kW - Space requirement approx. W 3500 x H 2350 x D 1950 mm - Weight approx. 6.8 t - with: - CNC control DELEM DA 58 - Back gauge 0 - 600 mm

presses / Bending Presses
11.09.2026
approved
dealer
item-No.: 162737431

used

check
Location: Land-de

Offer 25227 Specifications: - Pressure capacity 150 t - Working width 3600 mm - Passage between the uprights 3150 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Feed speed 70 mm/sec. - Working speed 7 mm/sec. - Retraction speed 60 mm/sec. - Ram stroke 120 mm - Adjustment range fixed stops 120 mm - Motor power approx. 7.5 kW - Oil filling approx. 300 l - Space requirement approx. W 3850 x H 2300 x D 1600 mm - Weight approx. 8700 kg - with: - Swivel arm – control panel with ATL 550 control - For crimping depth + backgauge -Mot. Backgauge - Crowning device - Lasersafe FIESSLER - 4-fold universal die, split sharpening tool + deer's foot tool - Two-hand control panel, foot switch,

presses / Bending Presses
23.06.2025
item-No.: 162712293
New in: 1995

used


pressure: 120 tchamfer lenght: 3100 mmstroke: 130-180 mmtotal power requirement: 11 kWweight of the machine ca.: 7200 kgdimensions of the machine ca.: 3500x1500x2300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
10.11.2026
approved
dealer
item-No.: 162750098
New in: 1994

used

check
Location: Land-de

Offer 26226 Technical data: - Pressure capacity 220 t - Working width 3050 mm - Passage between the uprights 2550 mm - Table height 950 mm - Projection 450 mm - Installation height 550 mm - Drive 400 V / 18.5 kW - Floor recess - Space requirement approx. W 3500 x H 2950 x D 2000 mm - Weight machine approx. 17500 kg - Two-hand control panel with foot switch - Back gauge adjustable from the front by handwheel - Various bending tools

presses / Bending Presses
23.06.2025
item-No.: 162704095
New in: 2010

used


pressure: 56 tchamfer lenght: 2200 mmdistance between columns: 2100 mmthroat: 200 mmtotal power requirement: kWweight of the machine ca.: 6100 kgdimensions of the machine ca.: 2800x1800x2400 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
12.11.2026
approved
dealer
item-No.: 162738835
New in: 1997

used

check
Location: Land-cz

Inv. Num. : 8630 Type: EHP 50 Producer: Darley Created: 1997 Parameters: Control system: DELEM Compressive force: 50 t Maximum bending length: 2000 mm Machine weight: 2600 kg

presses / Bending Presses
10.11.2026
approved
dealer
item-No.: 162750714
New in: 2016

used

check
Location: Land-de

Offer 26235 Technical data: - Working width 4100 mm - Pressure capacity 170 t - Passage between the uprights 3600 mm - Projection 400 mm - Max. installation height approx. 400 mm - Plunger stroke 225 mm - Working height approx. 920 mm - Motor power approx. 18 kW - Oil filling approx. 300 l - Space requirement approx. W 4800 x H 2750 x D 2300 mm - Weight approx. 12500 kg - with: - Swivel arm – control panel with ESA control - for 4 axes Y1 + Y 2 , X , Z - Mot. Backgauge with mot. controlled height adjustment - Cambering - Safety – light barrier - 4-fold Univ. matrix + divided. Deer foot tool 4000 mm - Sharpening tool 4000 mm - Deer foot tool 3000 mm - V – Die 3000 mm - E.- Footswitch, - Support arms can be moved sideways

presses / Bending Presses
29.06.2026
approved
dealer
item-No.: 162748686

new

check
Location: Land-de

Press brake – 200 T – Open width 1,600 mm For sale is a hydraulic press brake from the manufacturer DURENDUS with a maximum press force of 200 t. The machine has an open width of 1,600 mm, a maximum installation height of 1,200 mm and a stroke of 1,000 mm, making it suitable for bending, forming and straightening work in industrial use. Technical data + information: Press brake – 200 T – Open width 1,600 mm General information - Reference ID: ME-2026-A-180_DE-2026-ME-215-01 - Type: 2-column frame press - Manufacturer: DURENDUS - Press force: 200 T (adjustable) - Open width: 1,600 mm - Open height: 1,200 mm - Usable area ram: 1,500 mm - Table height from the floor: 850 mm - Overall dimensions (W × D × H): approx. 1,300 × 2,700 × 3,900 mm - Total weight: approx. 5,300 kg Hydraulic cylinders - Stroke: 0–1,000 mm - Working pressure: 270 bar - Cylin ...

presses / Bending Presses
01.10.2026
item-No.: 162748960
New in: 2011

used

Location: Land-de

Press brake Durmazlar ES 3006 BJ 2011

presses / Bending Presses
13.11.2026
approved
dealer
item-No.: 162750857
New in: 2012

used

check
Location: Land-de

Offer 26697 Technical data: - Pressure capacity 320 t - Working width 3050 mm - Passage between the uprights 2550 mm - Projection 460 mm - Installation height approx. 630 mm - Plunger stroke 365 mm - Motor power approx. 37 kW - Space requirement approx. W 5700 x H 3250 x D 2450 mm - Weight approx. 17500 kg - with: - swivel arm – control panel with control - CYBELEC EVA-10S ; Y 1 + Y 2 ; X , R , Z - Mot. Backgauge - Mot. Crowning - Safety – light barrier - E. footswitch - 4-fold universal die split - V – Matrices - Split sharpening tool set, various other tools

presses / Bending Presses
23.06.2025
item-No.: 162715037

used


pressure: 110 tchamfer lenght: 3050 mmdistance between columns: 2550 mmControl: CYBELEC DNC 880 S weight of the machine ca.: 10.000 kgdimensions of the machine ca.: 3400x1650x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
23.06.2025
item-No.: 162718907
New in: 1989

used


pressure: 110 tchamfer lenght: 3000 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 8,00 tdimensions of the machine ca.: mSlight oil loss from the tankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
23.06.2025
item-No.: 162729141
New in: 1993

used


pressure: 150 tchamfer lenght: 3550 mmdistance between columns: 3050 mmControl: Cybelec DNC 880S stroke: 700 mmthroat: 350 mmdimensions: 4400x2200x3940 mmweight of the machine ca.: 15.000 kgAccessories/equipment:- Bending aid in front of the machine- Parking space for bending aid- 3 stop fingers- Control conversion 2011The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
23.06.2025
item-No.: 162729135
New in: 1991

used


pressure: 150 tchamfer lenght: 4050 mmdistance between columns: 3550 mmcolumn arm: 350 mmstroke of ram - hydraulic: 220 mmvoltage: 380 Vfrequency: 50 Hzrated current: 43 A: 63 Acontrol voltage: 220/240 kWcontrol: DNC 80 weight of the machine ca.: 14500 kgdimensions of the machine ca.: 4830x2100x3220 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
23.06.2025
item-No.: 162722215
New in: 2004

used


press capacity: 2250 kNquantity of oil: 400 l: DNC 1200PS Eco/Col weight of the machine ca.: ca. 15.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
23.06.2025
item-No.: 162705242
New in: 1998

used


pressure: 200 tchamfer lenght: 4050 mmdistance between columns: 3550 mmControl: FASTI FM 200 weight of the machine ca.: 14.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
23.06.2025
item-No.: 162715647
New in: 1999

used


pressure: 50 tchamfer lenght: 2100 mmthroat: 420 mmstroke: 200 mmmachine weight ab.: 4.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
23.06.2025
item-No.: 162704198
New in: 1994

used


pressure: 160 tchamfer lenght: 3200 mmControl: CYBELEC CybTouch 15 PS weight of the machine ca.: 14.000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
23.06.2025
item-No.: 162705311
New in: 1993

used


pressure: 160 tchamfer lenght: 3050 mmdistance between columns: 2550 mmtable width: 220 mmcolumn arm: 280 mmdayligth: 440 mmwork stroke: max. 250 mmtotal power requirement: 22 kWweight of the machine ca.: 13 t- Hubgeschw. / speed of stroke: abwärts: down, 90 mm/s- Press down 11 mm/s- Aufw. / upward: 90 mm/s- Spez/specif.: 2-Hand/Fuss-Bedienung / 2 –hand foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
23.06.2025
item-No.: 162732383

used


pressure: tchamfer lenght: mmdistance between columns: mmstroke: mmtotal power requirement: kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
23.06.2025
item-No.: 162708382

used


sheet width: . mmplate thickness: . mmdistance between columns: . mmpressure: tchamfer lenght: mmtotal power requirement: kWweight of the machine ca.: 10 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
23.06.2025
item-No.: 162705349
New in: 1978

used


pressure: 100 tchamfer lenght: 2050 mmtotal power requirement: 11 kWweight of the machine ca.: 5,9 tdimensions of the machine ca.: m- ram adjustment: 150 mm- distance ram to table: 400 mm- stroke: 150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
10.11.2026
approved
dealer
item-No.: 162750672
New in: 1996

used

check
Location: Land-de

Offer 26222 Technical data: - Pressure capacity 200 t - Working width 4100 mm - Passage between the uprights 3050 mm - Table width 220 mm - Projection 500 mm - Installation height 550 mm - Feed speed 80 mm/sec. - Working speed 0 to 7 mm/sec. - Retraction speed 70 mm/sec. - Plunger stroke 300 mm - Pneumatic connection - Drive 400 V / 18 kW - Space requirement approx. W 4800 x H 3150 x D 2200 mm - Weight approx. 17000 kg - with: - Swivel arm – control panel with control DELEM DA 65 Bj.2009 - Safety light barrier - Mot. Backgauge - Sharpening tool + universal die - Two-hand control panel with foot switch,

presses / Bending Presses
23.06.2025
item-No.: 162718908

used


pressure: 100 tchamfer lenght: 1110 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 0,50 tdimensions of the machine ca.: mManually adjustable back stopLots of toolsSegmented toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
23.06.2025
item-No.: 162728297

used


pressure: 020 tchamfer lenght: 1340 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 1,70 tdimensions of the machine ca.: mStroke activation via 2-hand operationManually adjustable back stop with analogue displayStroke depth adjustable via handwheelSegmented toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
20.10.2026
approved
dealer
item-No.: 162738898
New in: 2010

used

check
Location: Land-de

Press brake with Stäubli robot cell press Manufacturer: LA G Model: GBS R 1250 50 The machine was only used for a very short period of time.

presses / Bending Presses
23.06.2025
item-No.: 162708290
New in: 1974

used

Location: Land-de

distance between columns: 300 mmtable length: 3550 mmtable width: 190 mmtable height: 800 mmdistance between columns: 3230 mmcolumn arm: 300 mmweight of the machine ca.: 12,5 tdimensions of the machine ca.: 1600 x 3800 x 2800 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
09.04.2025
item-No.: 162715158
New in: 1992

used

Location: Land-de

Offer 25100 Specifications: - Pressure capacity 200 t - Working width 3050 mm - Passage between the uprights 2550 mm - Table width 180 mm - Projection 250 mm - Installation height 400 mm - Feed speed 80 mm/sec. - Working speed 6.7 mm/sec. - Retraction speed 67 mm/sec. - Plunger stroke 150 mm - Adjustment range fixed stops 120 mm - Drive 400 V 14.5 kW - Space requirement approx. W 3800 x H 2980 x D 1700 mm - Weight approx. 11500 kg - with: - Back gauge with 2 stop fingers - Deer's foot tool - 4-fold universal die - Two-hand control panel, foot switch,

presses / Bending Presses
23.06.2025
item-No.: 162715494
New in: 1998

used


pressure: 35 tchamfer lenght: 2000 mmweight of the machine ca.: 3 ttotal power requirement: kWdistance between columns: mmdimensions of the machine ca.: mpressure 35tomax. bending length 2000mmarrester behinddrive capacity 4,5 kWweight 3000kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
23.06.2025
item-No.: 162710403

used


pressure: 35 tchamfer lenght: 2500 mmstroke: 100 mmthroat: 200 mmmachine weight ab.: 2.600 kgdimensions: 2550 x 1040 x 1930 mmControl: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
23.06.2025
item-No.: 162728212
New in: 1971

used


pressure: 50 tchamfer lenght: 2000 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mManual back stop2-hand and foot controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
23.06.2025
item-No.: 162710402

used


pressure: 50 tchamfer lenght: 2000 mmdistance between columns: 1660 mmstroke: 100 mmthroat: 400 mmdaylight between press beam: 300 mmwork speed: 7 mm/sreturn speed: 60 mm/soil volume: 50 lweight: ca. 3.000 kgdimensions: 2000 x 1400 x 1850 mmControl: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
15.06.2026
approved
dealer
item-No.: 162741377

used

check
Location: Land-de

Specifications: Pressure: 50 t Bending length: 2000 mm Equipment: - Backgauge - Emergency stop push button - Foot control

presses / Bending Presses
01.10.2026
item-No.: 162740063

used

Location: Land-de

We would have all these machines as a package for sale. 1x Press brake 160to 3m 1x Press brake 60to 2m 1x KRC 150 robot 1x welding robot cell with Kuka robot and Fronius TPS4000 1x Micron

presses / Bending Presses
23.06.2025
item-No.: 162714299
New in: 2005

used


pressure: 230 tchamfer lenght: 4250 mmcolumn daylight: 3680 mmthroat: 420 mmstroke of ram: 445 mmControl: TASC 6000 weight of the machine ca.: 19.200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
19.10.2026
item-No.: 162754012
New in: 2001

used

Location: Land-de

3 x Trumpf bending machines (hydraulic press brakes): • TrumaBend V50 | Year of manufacture 1997 • TrumaBend V85 | Year of manufacture 1997 • TrumaBend V85 S | Year of manufacture 2001 Condition & Maintenance: As can be seen in the attached pictures, all machines were fully serviced as part of the annual UVV inspection. The last inspection took place for all plants in the summer of 2026. The machines are currently still in ongoing production operation and are fully operational.

presses / Bending Presses
23.06.2025
item-No.: 162713015
New in: 1998

used


pressure: 85 tchamfer lenght: 2050 mmdistance between columns: 1750 mmcontrol: DELEM stroke: 215 mmthroat: 410 mmweight: 7.750 kgOverall size: 2700x2100x2400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
20.10.2026
approved
dealer
item-No.: 162753892
New in: 1997

used

check
Location: Land-de

Lg.Nr. 25514 Defective Hydr. CNC - Press Brake Technical data: - Max. working length 3060 mm - Column passage 2690 mm - Max. pressing force 1300 kN - Max. distance table / plunger 370 mm - Stand projection 410 mm - Plunger stroke 215 mm - Lifting speeds - Downward speed idle max. 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 to 11 mm/sec - Total drive power 18 kW - Pneumatic connection 6 bar - Space requirement approx. W 3800 x H 2400 x D 2400 mm - Weight approx. 11500 kg - with: - With 6-axis CNC control DELEM - Two-hand control panel with foot switch - crowning device - Controlled backgauge with height adjustment 5 - 860 mm - Hydr. Upper + Lower - Tool Clamping - Die table displacement pneumatically supported - Machine does not drive reverence because 2 axles right in the back gauge are without function, contr ...

presses / Bending Presses
07.02.2025
item-No.: 162720948
New in: 1997

used

Location: Land-de

Specifications: - Max. working length 4060 mm - Column passage 3680 mm - Max. pressing force 1700 kN - Max. distance table / plunger 385 mm - Stand projection 410 mm - Plunger stroke 215 mm - Lifting speeds - Downward speed idle max. 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 to. 11 mm/sec - Total drive power 30 kW - Space requirement approx. W 5600 x H 3000 x D 2400 mm - Weight approx. 18000 kg - with: - with 6 axis CNC control DELEM - Two-hand control panel with foot switch - crowning device - Controlled backgauge with height adjustment 5 - 860 mm - hydr. Upper + Lower Tool Clamping - Die table displacement pneumatically supported

presses / Bending Presses
23.06.2025
item-No.: 162705342
New in: 1997

used


pressure: 86 tchamfer lenght: 2050 mmdistance between columns: 1750 mmControl: distance table - lower edge of ram: 410 mmcolumn arm: 410 mmstroke of ram - solid: 285 mmtotal power requirement: kWweight of the machine ca.: 7,7 tdimensions of the machine ca.: 3700 x 2700 x 2100 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
23.06.2025
item-No.: 162727960
New in: 2004

used


pressure: 300 tchamfer lenght: 3050 mmdistance between columns: mmmachine weight ab.: 17.100 kgEquipment:- 2-hand footswitch- 1x bending aid (BH1) in front of the machine- Side safety doors- Guard door behind the machineThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
04.11.2026
approved
dealer
item-No.: 162755149

used

check
Location: Land-at

Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,

presses / Bending Presses
23.06.2025
item-No.: 162732382
New in: 1997

used


pressure: 160 tchamfer lenght: 3550 mmstroke: 300 mmweight: 15400 kgdimensions: 4600x2600x2900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
23.06.2025
item-No.: 162720637
New in: 2000

used


pressure: 100 tchamfer lenght: 3100 mmstroke: 215 mmsafety distance: 350 mmcolumn daylight: 3250 mmcompressed air: max. 8 barclosing speed: 200 mm/spressing speed: 1-->10 mm/secPressing force: 1000 KNMains voltage: 400 V 7,5 KW, 50 HZ Back-up fuse max.: 25 AT range L-W-H: 3450x2000x2800 mmtotal power requirement: 18,5 kWweight of the machine ca.: 8.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE since 1996