used Conveying belts for sale

Dosing conveyor belt Ammann Brand: Ammann Type: Heavy version. A.A length = 3100 mm. Belt width: 1200 mm. Drive: 15 kW slip-on gearbox In stock: 2 pieces.

Dosing conveyor belt Ammann Brand: Ammann A.A Length = 1700 mm. Belt width: 650 mm. Drive: 1.5 kW slip-on gearbox In stock: 7 pieces.

Binder Bunker Conveyor Belt Brand: Binder Length A.A. = 7000 mm, belt width 1400 mm Drive: Slip-on gearbox 11 kW.

Used Chain Conveyor Belt Manufacturer: BOA Type: 1500 HG 29°HTK 11770 Year of Make: 1997 Technical data of the chain belt conveyor belt: Drive power 3 kW Length of feed belt 650 mm Length of climbing strap 10770 mm Inclination: 29° Usable width 1400 mm Height of drive axle above ground 4,260 mm Height of sidewall riser strap, inside 800 mm

Conveyor belt Böhringer Brand: Böhringer Br4: A.A length = 15000 mm, belt width: 650 mm, drive: 7.5 kW Br5: A.A length = 22500 mm, belt width: 1000 mm, drive: 7.5 kW

Technical data feeding conveyor belt:Manufacturer BollegraafTyp HBT 1216/2000 18000Year of construction 2015Driving motor 5,5 kWLength feeding conveyor 18,000 mmGrade 0°Effecting width 2,000 mmHeight of side wall feeding conv. 500 mmTransport dimensions 18,000 x 3,200 (2,830 mm without motor and gear) x 1,200 mm l x w x hWeight approx. 13 tComments:Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Steel Link Conveyor Belt Hazemag Brand: Hazemag Dim.: A.A. 12,000 mm, belt width 1400 mm Drive: 37 kW electric motor, Brand: Flender Weight: about 38 tons.

Steel Link Conveyor Belt Hazemag Brand: Hazemag Dim.: A.A. 12,000 mm, belt width 1400 mm Drive: 37 kW electric motor, Brand: Flender Weight: about 38 tons.

Dosing conveyor belt Kleemann Brand: Kleemann A.A length = 6,000 mm, Strip width: 1000 mm Drive: 15 kW slip-on gearbox

Conveyor belt Brand: LKOREMAN Strip width: 500 mm A.A Length = 6000 mm Power requirement: Slip-on gearbox 2 kW In stock: 2 pieces A.A Length = 10000 mm Power requirement: drum motor 1.1 kW In stock: 1 piece

LKoreman Conveyor Belt (H1-8) Brand: LKOREMAN H1=A.A Length: 20,000 mm - Strip width: 650 mm - Power requirement: 5.5 kW H2=A.A Length: 20,000 mm - Strip width: 650 mm - Power requirement: 5.5 kW H3=A.A Length: 15,000 mm - Strip width: 650 mm - Power requirement: 4 kW H4=A.A Length: 8,000 mm - Strip width: 650 mm - Power requirement: 4 kW H5=A.A Length: 17,000 mm - Strip width: 800 mm - Power requirement: 7.5 kW H6=A.A Length: 15,000 mm - Strip width: 800 mm - Power requirement: 5.5 kW H7=A.A Length: 8,000 mm - Strip width: 800 mm - Power requirement: 4 kW H8=A.A Length: 25,000 mm - Strip width: 1200 mm - Power requirement: 15 kW

Conveyor belt Brand: LKOREMAN Strip width: 500 mm A.A Length = 6000 mm Power requirement: Slip-on gearbox 2 kW In stock: 1 piece A.A Length = 10000 mm Power requirement: drum motor 1.1 kW In stock: 1 piece

Conveyor belt Metso Brand: Metso A.A Length = 8000 mm. Belt width: 1600 mm. Drive: 5.5 kW. 2 pieces In stock: 1 used and 1 unused.

Used Chain Conveyor Belt Manufacturer: PAAL Type: KEM 1500 Year of Make: 2005 specifications: Conveying width: approx. 1,500 mm Belt run: approx. 3,100 mm horizontally underfloor, then rising below 28° over a length of approx. 6,000 mm, Descending below 10° on the remaining length and conveying into the press Conveyor belt speed: 0.27 m/sec. Conveyor belt drive power: 4.0 kW Sidewall heights - in the horizontal part: 527 mm - in the climbing section: 777 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE pre-assembled as far as possible, consisting of: - Strip frame in solidly welded profile steel and sheet steel edge construction, - Additional sliding guides below the belt support profiles in the horizontal and riser sections to absorb heavy loads, - Conveyor belt (quality: EP 200/2 2:1) with lateral 20 mm high T-studs for sealing the be ...

Used Chain Conveyor Belt Manufacturer: PAAL Type: KEM 1500 Year of Make: 2009 specifications: Conveying width: approx. 1,500 mm Center distance: approx. 9,625 mm Belt course: approx. 3,000 mm horizontally running underfloor, then rising below 30° over a length of approx. 5,875 mm, sloping below 20° on the remaining length and conveying into the press Conveyor belt drive power: 3.0 kW Sidewall heights - in the horizontal part: 527 mm - in the climbing section: 777 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE pre-assembled as far as possible, consisting of: - Strip frame in solidly welded profile steel and sheet steel edge construction, - Additional sliding guides below the belt support profiles in the horizontal and riser sections to absorb heavy loads, - Conveyor belt with 20 mm high T-studs on the sides to seal the belt stringers,  ...

Used Chain Conveyor Belt Manufacturer: PAAL Type: KEM 1750 Year of Make: 2004 specifications: Conveying width: approx. 1,500 mm Belt run: approx. 4,300 mm horizontally underfloor, then increasing over a length of approx. 6,300 mm, Conveyor belt drive power: 4.0 kW Sidewall heights - in the horizontal part: 527 mm - in the climbing section: 1,027 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE pre-assembled as far as possible, consisting of: - Strip frame in solidly welded profile steel and sheet steel edge construction, - Additional sliding guides below the belt support profiles in the horizontal and riser sections to absorb heavy loads, - Conveyor belt with 20 mm high T-studs on the sides to seal the belt stringers, - Belt routing in a neutral zone to avoid stretching tensions, - Chain type M-80 with case-hardened bushings, bolts and roller ...

Technical specification Conveyor belt width: 1.87 m Length of the vertical part 8.6 m Lifting height: 5.2 m Total length in horizontal view: 26 m Belt depth in the horizontal loading area: 0.55 m Motor power: 7.5 kW + 5.5 kW

Technical specification Conveyor belt width: 1.87 m Length of the vertical part 8.6 m Lifting height: 5.2 m Total length in horizontal view: 26 m Belt depth in the horizontal loading area: 0.55 m Motor power: 7.5 kW + 5.5 kW If you have any questions, please call us: +48 696 072 985

Specifications Strip width: 500 mm Distance between side walls: 5 m Length: 40 mm Power connection: 0.75kW Threshold height: every approx. 400mm Motor power: 400V Threshold spacing: 550 mm