Conveying belts PAAL KEM 1500

machines and plants for waste disposal and recycling / other machinery for waste disposal and recycling / Conveying belts

Manufacturer: PAAL

Model:KEM 1500

Type of machine: Conveying belts

item-No.: 162718669

Quantity: 0

Date: 14.03.2025

Year of manufacture: 2005

Location: Land-de Germany 49324 Melle

Price:


Used Chain Conveyor Belt

Manufacturer: PAAL

Type: KEM 1500

Year of Make: 2005

specifications:

Conveying width: approx. 1,500 mm

Belt run: approx. 3,100 mm horizontally underfloor,

then rising below 28° over a length of approx. 6,000 mm,

Descending below 10° on the remaining length and conveying into the press

Conveyor belt speed: 0.27 m/sec.

Conveyor belt drive power: 4.0 kW

Sidewall heights
- in the horizontal part: 527 mm
- in the climbing section: 777 mm

Operating voltage: 3 x 400 VAC / 50 Hz / N / PE

pre-assembled as far as possible, consisting of:

- Strip frame in solidly welded profile steel and sheet steel edge construction,
- Additional sliding guides below the belt support profiles in the horizontal and riser sections to absorb heavy loads,
- Conveyor belt (quality: EP 200/2 2:1) with lateral 20 mm high T-studs for sealing the belt stringers,
- Belt routing in a neutral zone to avoid stretching tensions,
- Chain type M-80 with case-hardened bushings, bolts and rollers,
- Chain straps with reinforced carrying brackets and partly with replaceable, lateral plastic chain protectors,
- chain string breaking load 8 t, (16 t static load with a nominal width of 1.2 m to approx. 700 kg per m of strip length),
- Belt support profiles at intervals of 250 mm torsionally stiff with 4 screws each attached to the chain plates without belt intermediate layer,
- Carriers above the belt made of angle steel,
- Bevel gear drive motor with integrated brake,
- Drip oilers for uniform lubrication of the chains,
- Conveyor belt supports made of sectional steel construction with height adjustment,
- Emergency stop switch on the side of the conveyor belt and cable pull emergency stop above the conveyor belt in standard design,
- Start/stop switch on the rising conveyor belt scaffolding,
- Synthetic resin top coat in light blue according to RAL 5012

Inquiry

Machinery dealer?

Please remit optionally

Send wanted inquiry?

Copy to you?

Save input data

Used Chain Conveyor Belt

Manufacturer: PAAL

Type: KEM 1500

Year of Make: 2005

specifications:

Conveying width: approx. 1,500 mm

Belt run: approx. 3,100 mm horizontally underfloor,

then rising below 28° over a length of approx. 6,000 mm,

Descending below 10° on the remaining length and conveying into the press

Conveyor belt speed: 0.27 m/sec.

Conveyor belt drive power: 4.0 kW

Sidewall heights
- in the horizontal part: 527 mm
- in the climbing section: 777 mm

Operating voltage: 3 x 400 VAC / 50 Hz / N / PE

pre-assembled as far as possible, consisting of:

- Strip frame in solidly welded profile steel and sheet steel edge construction,
- Additional sliding guides below the belt support profiles in the horizontal and riser sections to absorb heavy loads,
- Conveyor belt (quality: EP 200/2 2:1) with lateral 20 mm high T-studs for sealing the belt stringers,
- Belt routing in a neutral zone to avoid stretching tensions,
- Chain type M-80 with case-hardened bushings, bolts and rollers,
- Chain straps with reinforced carrying brackets and partly with replaceable, lateral plastic chain protectors,
- chain string breaking load 8 t, (16 t static load with a nominal width of 1.2 m to approx. 700 kg per m of strip length),
- Belt support profiles at intervals of 250 mm torsionally stiff with 4 screws each attached to the chain plates without belt intermediate layer,
- Carriers above the belt made of angle steel,
- Bevel gear drive motor with integrated brake,
- Drip oilers for uniform lubrication of the chains,
- Conveyor belt supports made of sectional steel construction with height adjustment,
- Emergency stop switch on the side of the conveyor belt and cable pull emergency stop above the conveyor belt in standard design,
- Start/stop switch on the rising conveyor belt scaffolding,
- Synthetic resin top coat in light blue according to RAL 5012
seller offer No. resale 162718669
can't update statistics 2