98 offers

Your found location: Latitude 0.0 + Longitude 0.0
Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:
sheet metal working / Folding Machines
23.06.2025
item-No.: 162728004
New in: 1992

used


plate thickness: 3 mmBending Angle: 165 °: dreiphasig total power requirement: 380 V - 10,5 A 50 HZ weight of the machine ca.: ca. 3.900 kgdimensions of the machine ca.: B 2400 x L 4300 x H 1700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Folding Machines
23.06.2025
item-No.: 162714907

used


sheet width: 1020 mmplate thickness: 2,5 mmbending angle max.: 135 °stroke of upper beam: 25 mmweight of the machine ca.: 285 kgdimensions of the machine ca.: 1,35 x 0,85 x 1,20 m PRICE: 2.045,-- EUR - with an oblique segmented upper cheek- distribution segment: 25-30-35-40-45-50-75-100-150-200-270- done with the foot brake applicationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Folding Machines
23.04.2025
ankerimg
item-No.: 162714283

new

Location: Land-de
Price: 5.100 €

Exhibition machine (unused) Working width 1,250mm Bending capacity steel : 1.25 (400N/mm2) Bending angle max. 135 degrees

sheet metal working / Folding Machines
07.09.2026
approved
dealer
item-No.: 162751634
New in: 1963

used

check
Location: Land-de

Lg.Nr. 21275 Hand Folding Machine Technical data: - Max. working width 1030 mm - Max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - lockable with end stop - Upper beam is operated with side hand crank - Max. stroke upper beam 120 mm - Max. adjustment bending beam 45 mm - Bending process is supported by eccentric weight - Space requirement approx. W 1750 x H 1120 x D 450 mm - Weight approx. 620 kg

sheet metal working / Folding Machines
05.03.2025
item-No.: 162719296
New in: 1982

used

Location: Land-de

Manual Swivel Bending Machine Specifications: - Max. working width 1030 mm - Max. material thickness 3 mm - Bending angle approx. 0 - 135 ° - lockable with end stop - Upper beam is operated with side hand crank - Max. stroke upper beam 120 mm - Max. adjustment bending beam 45 mm - Bending process is supported by eccentric weight - Space requirement approx. W 1750 x H 1120 x D 450 mm - Weight approx. 620 kg

sheet metal working / Folding Machines
16.01.2025
item-No.: 162722406

used

Location: Land-de

Specifications: Working length: 4060 mm Bending capacity: 3.0 mm Control with bending simulation: MULTIBEND 901 grafik 2D Automatic adjustment of the bending angle depending on material thickness Bending angle adjustment: 0 – 180° Backgauge motorized adjustable: 10 -1500 mm Max. opening bending beam: 300 mm Bending and lower beam adjustment range : 80 mm Motor power: 7.5 kW Dimensions (length x width x height): approx. 5500 x 4050 x 2600 mm Weight: approx. 6.8 tons

sheet metal working / Folding Machines
27.02.2025
item-No.: 162719771
New in: 1951

used

Location: Land-de

Gr. working width: 1250 mm for sheet metal up to: 1.75 mm Opening width upper beam: 70 mm Adjustability bending brace: 50 mm Space requirement: 1880 x 740 x 1140 mm

sheet metal working / Folding Machines
04.10.2026
approved
dealer
item-No.: 162745116
New in: 2021

used

check
Location: Land-tr

Working lenght 2540 mm Material thickness max (400 N/mm²) 2.5 mm Upper beam upstroke max 280 mm Gauging system (rectangular) 6-1550 mm Gauging system (T-shape) 6-3050 mm

sheet metal working / Folding Machines
12.10.2026
approved
dealer
item-No.: 162744748
New in: 2009

used

check
Location: Land-de

used RAS 62.30 folding machine TurboBendPlus, a proven and reliable machine for professional sheet metal processing on roofs, walls and façade. The machine is ideal for tinsmiths, roofers, plumbers, locksmiths and metalworkers who rely on precise work results, robust technology and economic work. The RAS 62.30 impresses with its robust design and the high quality of the manufacturer RAS. It is ideally suited for everyday use Use in the trade and in the workshop. Used machines of this class offer an economically attractive opportunity to combine high-performance technology at a good price. The machine is equipped with a motorized depth stop, that facilitates precise and comfortable work. In addition, it has a segmented upper beam with a height of 110 mm, which makes the machine particularly can be used flexibly for different bending and bending work. This used RAS 62.30 is th ...

sheet metal working / Folding Machines
23.06.2025
item-No.: 162719138

used


sheet width: 1630 mmplate thickness: 3 mmtotal power requirement: 2 kWweight of the machine ca.: 1300 kgdimensions of the machine ca.: 2360x1250x1280 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Folding Machines
28.03.2025
item-No.: 162716001
New in: 1981

used

Location: Land-de

with foot switch, with simple control up to 6 bending angles, potentiometer preset, manual bending beam lowering, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 2500 mm Sheet thickness steel: 2.5 mm without backgauge Colour: green Total power requirement: 16 A Space requirement: approx. 3400 x 1000 x 1600 mm Machine weight: 2000 kg without roller scissors Bending angle: 145 degrees Machine Number: 50/3

sheet metal working / Folding Machines
23.06.2025
item-No.: 162719339

used


sheet width: 2540 mmplate thickness: 2,5 mmOpening width of the upper beam: 200 mmBending Angle: 0-180 °engine output: 2,6 kWweight of the machine ca.: 1750 kgdimensions of the machine ca.: 3150x1200x1400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Folding Machines
28.07.2026
approved
dealer
item-No.: 162748730

used

check
Location: Land-de
Price: 21.700 €

Max. bending length: 2540 mm Max. sheet thickness: 2.5 mm steel Motor-controlled back gauge with folding cams up to 1500 mm Multiple program sequences with different bending angles and lifting heights possible Multibend 2000 controller Bending rail ground Weight: 1,700 kg

sheet metal working / Folding Machines
09.11.2026
approved
dealer
item-No.: 162755472
New in: 1990

used

check
Location: Land-de

Offer 26247 Technical data: - Max. working width 2040 mm - max. material thickness at 40 kp / mm² strength 3.5 mm - Bending angle adjustment electronically pre-selectable 0 - 135 ° - Smallest bending radius 1.25 x sheet thickness - Smallest inboard height 6 x sheet thickness - Automatic follow-up control for a complete workflow - Operation via hand or foot switch - Largest opening width / stroke of the upper beam 200 mm - Height adjustability - bending beam 80 mm - the lower beam 80 mm - Upper bolster drive 400 V / 1.1 kW - Bending beam drive 400 V / 1.5 kW - Manual backgauge can be operated from the front - various bending rails, - Honeysuckle tool divided approx. 1900 mm - Space requirement approx. W 3300 x H 1350 x D 1500 mm - Weight approx. 2600 kg

sheet metal working / Folding Machines
11.09.2026
approved
dealer
item-No.: 162745341
New in: 1990

used

check
Location: Land-de

Offer 26091 Technical data: - Max. working width 3200 mm - max. material thickness at 40 kp / mm² strength 2.5 mm - Bending angle adjustment electronically pre-selectable 0 - 180 ° - Operation via hand or foot switch - Largest opening width / stroke of the upper beam 200 mm - Height adjustability - bending beam 80 mm - the lower beam 90 mm - Upper bolster drive approx. 400 V / 1.8 kW - Bending beam drive approx. 400 V / 2.6 kW - Space requirement approx. W 4200 x H 1550 x D 2200 mm - Weight approx. 3800 kg

sheet metal working / Folding Machines
23.06.2025
item-No.: 162719984

used


working width: 2040 mmplate thickness: 3,5 mmdistance between columns: 2100 mmsheet width: 2040 mmoutput: 3,7 kwweight of the machine ca.: 2,3 tBaujahr: unbekanntThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Folding Machines
18.05.2026
approved
dealer
item-No.: 162740834
New in: 1976

used

check
Location: Land-de

Large working width: 3060 mm for sheet metal (at 40 kg strength) up to: 4 mm Kl. Bending radius: sheet thickness x 1.25 Kl. Inboard height: sheet thickness x 6 Opening width of the upper beam: 220 mm Adjustability of the lower/bending beam: 90 mm Max. bending angle: 180° Lifting speed down/up: 40/60 mm/s Hydraulic drive: 380 V, 7.5 kW Weight: 4.3 t Space requirement: 4150 x 1800 x 2500 mm

sheet metal working / Folding Machines
23.06.2025
item-No.: 162703517
New in: 2002

used


sheet width: 4000 mmplate thickness: 2,5 mmdistance between columns: 4060 mmstroke: 300 mmtotal power requirement: 3 kWweight of the machine ca.: 5.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Folding Machines
23.06.2025
item-No.: 162716151

used


sheet width: 3200 mmplate thickness: 4 mmOpening width of the upper beam: 400 mmBending Angle: 0-180 °total power requirement: 7,5 kWdimensions of the machine ca.: 5000x2200x2560 mmweight of the machine ca.: 5500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Folding Machines
28.07.2026
approved
dealer
item-No.: 162740098

used

check
Location: Land-de
Price: 38.000 €

Max. bending length: 3200 mm Max. sheet thickness: 4 mm steel Motorized backgauge with hinged cams up to 2500 mm with stop extension (disassembled) Motorized bending beam adjustment Multibend 9001 controller Segmented upper beam tool with automatic tool clamping (height 100 mm) Operating instructions Weight: 5800 kg

sheet metal working / Folding Machines
23.06.2025
item-No.: 162714534
New in: 1970

used


sheet width: 6040 mmplate thickness: 2 mmtotal power requirement: 10 kWweight of the machine ca.: 7.000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Folding Machines
28.10.2026
approved
dealer
item-No.: 162754655
New in: 2001

used

check
Location: Land-de

used RAS double folding machine, the RAS XXL-Center 75.06 is a Automatic swivel bending centre for the efficient production of long roof, wall and façade profiles, which independently pull in sheet metal, position it and move it upwards bends at the bottom. Thanks to automated processes, simple programming via Bendex and optional cutting module, it enables an economical One-man operation with reduced personnel costs and high productivity. Machine has been repaired, checked, cleaned by a professional and is fully functional. Test run was carried out. Working length 6400 mm Sheet thickness max. steel 1.5 mm Sheet thickness max. aluminium 2.0 mm Sheet thickness max. VA 1.0 mm Back gauge (max.) 750 mm Back gauge (min.) 6.5 mm Colour grey/yellow Total power requirement 3 kW Dimensions 9,400 x 3,000 mm Weight 12500 kg Roller scissors none Bending angle (max) 300 deg ...

sheet metal working / Folding Machines
19.10.2026
approved
dealer
item-No.: 162745781
New in: 1991

used

check
Location: Land-de

with hand lever control, manual roller shears, robust and easy to operate Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is being carried out Working length: 6020 mm Sheet thickness steel: 1.2 mm Sheet thickness aluminium: 1.5 mm Colour: green Total power requirement: 1.5 kW Dimensions: 6600 x 1700 mm Machine weight: 1800 kg with roller scissors Bending angle (max.): 135 degrees Insertion depth: 960 mm Upper beam stroke: 140 mm Maschinennummer/machine number 6961

sheet metal working / Folding Machines
08.10.2026
approved
dealer
item-No.: 162753515
New in: 1995

used

check
Location: Land-de

used Schechtl manual bending machine, with foot lever Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Working length: 3040 mm Sheet thickness steel: 1.25 mm Sheet thickness aluminium: 1.75 mm without backgauge Colour: green Dimensions: 3800 x 800 x 1400 mm Machine weight: 1700 kg Upper beam stroke: 140 mm without roller scissors/ Opening width: 140 mm Bending angle (max.): 160 degrees Underbeam adjustment: 25 mm Machine number: 20592

sheet metal working / Folding Machines
05.10.2026
approved
dealer
item-No.: 162753189
New in: 2012

used

check
Location: Land-de

used Schechtl swivel bending machine, with hand roller shears, foot pedal, Sheet metal support rack, attachment rail 10 + 20mm, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Working length 3100 mm Blechstärke Stahl/sheet thickness steel 1.0 mm Blechdicke Alu/sheet thickness Aluminium 1.5 mm Blechdicke VA/sheet thickness Stainless 0.6 mm Backgauge (max.)/Backgage without Farbe/Colour grau/blau Space requirement approx. 3850 x 900 mm Machine Weight: 1300 kg Oberbolenhub/upper beam stroke 130 mm Roller shear/roller shear yes Öffnungsweite/opening width 130 mm Bending angle (max.)/bending angle 160 degrees Underbeam adjustment yes Back gauge (min,) no Machine number HB26495

sheet metal working / Folding Machines
12.11.2026
approved
dealer
item-No.: 162755747
New in: 1997

used

check
Location: Land-de

with foot lever, sharp rail 20 degrees Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 2040 mm Sheet thickness steel: 1.0 mm Sheet thickness aluminium: 1.5 mm Sheet thickness front: 0.6 mm Colour: grey Dimensions: 2630 x 660 x 1155 mm Machine weight: 700 kg Upper beam stroke: 00 mm Bending angle: 145 degrees Machine number: 21517

sheet metal working / Folding Machines
11.09.2026
approved
dealer
item-No.: 162745850
New in: 1991

used

check
Location: Land-de

Offer 26114 Technical data: - Bending process is carried out by hand, supported by counterweight - Clamping of the upper beam via eccentric lever + foot pedal - Max. working width 2040 mm - Max. material thickness St 40 1.00 mm - Bending angle adjustment via end stop 10 - 180 ° - max. stroke upper beam approx. 70 mm - Max. adjustability bending beam 10 mm - Space requirement approx. W 2800 x H 1200 x D 900 mm - Weight approx. 520 kg - various bending rails as shown

sheet metal working / Folding Machines
23.06.2025
item-No.: 162732214
New in: 1996

used


sheet width: 2000 mmplate thickness: 2 mmdistance between columns: 2100 mmtotal power requirement: 6 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,7x1,2x1,1 mVoltage 380Vbelt width max. 2000 mmsheet thickness 2 mmDimensions (LxWxH) approx. 2700x1200x1100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Folding Machines
19.10.2026
approved
dealer
item-No.: 162745783
New in: 1990

used

check
Location: Land-de

with segmented tools on the upper beam, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 2500 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminum: 2.0 mm Sheet thickness front: 1.0 mm without backgauge (max.) Colour: green Total power requirement: 400 V Machine weight: 2200 kg Dimensions: 3500 x 1800 x 1600 mm Machine Number: 1808

sheet metal working / Folding Machines
08.10.2026
approved
dealer
item-No.: 162753514
New in: 2018

used

check
Location: Land-de

used Schechtl swivel bending machine, with roller shears on the upper beam, Two foot switches, attachment rail 10 and 20m m Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Working length: 4040 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminum: 2.0 mm Sheet thickness front: 1.0 mm without backgauge Colour: grey/blue Total power requirement: 16 A Dimensions: 4965 x 720 x 1220 mm Machine weight: 3950 kg Upper beam stroke: 140 mm with roller scissors/ Opening width: 140 mm Bending angle (max.): 160 degrees Underbeam adjustment yes Machine number: MA7675

sheet metal working / Folding Machines
12.10.2026
approved
dealer
item-No.: 162738601
New in: 2021

used

check
Location: Land-de

Long bending machine, with the following equipment: - 1 sharper rail 20°, offset, radius 1 mm for the upper beam - 1 insert rail 10/100 mm and 14/100 mm each for the bending beam - 2 foot switches for 2-man operation - S-Touch control with graphical profile display - 21.5" LCD touch color monitor with high-resolution graphics - Motorized depth stop 8-1000 mm - F-Geometry - within the EU with 32 amp plug with 5 m cable Machine has been repaired, checked, cleaned by a professional and is fully functional. Test run was carried out. Working length: 4040 mm Sheet thickness max. steel: 1.5 mm Sheet thickness max. aluminium: 2.0 mm Sheet thickness max. VA: 1.0 mm Back gauge (min.): 8 mm Back gauge (max.): 1000 mm Colour: blue/grey Total power requirement: 400 V Dimensions: 5325 x 2232 x 1924 mm Weight: 5000 kg Upper beam stroke (opening width): 140 mm Plate thickness  ...

sheet metal working / Folding Machines
14.10.2026
approved
dealer
item-No.: 162753835
New in: 2012

used

check
Location: Land-de

used Schechtl folding machine, with factory-repaired control, CNC control (without graphics) with motor stop, foot switch, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length: 3100 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminum: 2.0 mm Sheet thickness front: 1.0 mm Back gauge (max.): 8 - 1000 mm Colour: grey/blue Total power requirement: 16 A Dimensions: 4207 x 1842 x 1745 mm Machine weight: 3100 kg Upper beam stroke: 140 mm Opening width: 140 mm Bending angle (max.: 160 degrees Underbeam adjustment yes Machine number: MA 6041

sheet metal working / Folding Machines
23.04.2025
item-No.: 162714297

new

Location: Land-de

Brand new Schechtl segment bending machine Sheet width: 1250 mm Sheet thickness steel: 1.25 mm Sheet thickness aluminium: 2.00 mm Sheet thickness front: 0.8 mm Colour: blue Dimensions: 1730 x 740 x 1180 mm Machine weight: 290 kg without roller scissors Opening width: 90 mm Bending angle: 150 mm

sheet metal working / Folding Machines
19.06.2026
approved
dealer
item-No.: 162741185
New in: 2025

new

check
Location: Land-de

with the following equipment: segmented with quick-clamping system Segment height: 100 mm Division of the segments: 8 x 100 mm 1 x 30/40/50/60/70 mm 1 x right corner 100 mm 1 x corner left 100 mm with engraved measurement numbers in upper and bending beam segments incl. wheels Extras: with window sill insert for the production of head edges, segment height 100mm with depth stop with T-slot rail Working length: 1250 mm Sheet thickness steel: 1.25 mm Sheet thickness aluminium: 2.00 mm Sheet thickness front: 0.80 mm Colour: blue Dimensions: 1730 x 740 x 1180 mm Machine weight: 290 kg without roller scissors Opening width: 90 mm Bending angle (max.: 150 mm Machine number: UK 20361

sheet metal working / Folding Machines
07.05.2025
item-No.: 162716000
New in: 1993

used

Location: Land-de

with motor backgauge, numerical NC control, manual bending beam lowering, foot switch Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 3020 mm Sheet thickness steel: 2.0 mm Sheet thickness aluminium: 3.0 mm Sheet thickness front: 1.5 mm Back gauge: 1000 mm Colour: green Total power requirement: 400 V Dimensions: 3800 x 1000 mm Machine weight: 4500 kg Upper beam stroke: 200 mm without roller scissors/ Opening width: 200 mm

sheet metal working / Folding Machines
07.05.2025
item-No.: 162719419
New in: 2012

used

Location: Land-de

one. Bending cheek presentation, foot pedal Sheet width: 3020 mm Sheet thickness steel: 3.0 mm Sheet thickness aluminum: 4.0 mm Sheet thickness front: 1.5 mm Back gauge: 1000 mm Colour: white/blue Total power requirement: 32 A Upper beam stroke: 200 mm Bending angle: 145 degrees Dimensions: 4300 x 2600 x 1900 mm Machine weight: 3960 kg Machine number: 220478

sheet metal working / Folding Machines
12.05.2025
item-No.: 162730009
New in: 1984

used

Location: Land-de

Offer 24483 Specifications: - Max. working width 1020 mm - max. material thickness at 40 kg / mm² strength 4 mm - Bending angle adjustment selectable 6 - 135 ° - 6-fold bending angle preselection - Largest opening width / stroke of the upper beam 250 mm - Height adjustability - bending beam 50 mm - the lower beam 50 mm - E. footswitch - Upper bolster drive 400 V / 2.2 kW - Bending beam drive 400 V / 2.2 kW - Space requirement approx. W 2100 x H 1400 x D 1100 mm - Weight approx. 2000 kg

sheet metal working / Folding Machines
11.09.2026
approved
dealer
item-No.: 162738825
New in: 1999

used

check
Location: Land-de

Offer 25290 Specifications: - Max. working width 3040 mm - max. material thickness at 40 kg / mm² strength 2 mm - Bending angle adjustment selectable 6 - 135 ° - Largest opening width / stroke of the upper beam 250 mm - Height adjustability - bending beam 50 mm - the lower beam 50 mm - Upper bolster drive 400 V / 0.37 kW - Bending beam drive 400 V / 0.75 kW - Manual backgauge - Split goat's foot bending splint - Space requirement approx. W 4000 x H 1400 x D 1200 mm - Weight approx. 3500 kg

sheet metal working / Folding Machines
23.06.2025
item-No.: 162712292
New in: 2004

used


sheet width: 2540 mmplate thickness: 4 mmstroke: 250 mmtotal power requirement: 4 kVAweight of the machine ca.: 3720 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Folding Machines
16.11.2026
approved
dealer
item-No.: 162754919
New in: 2013

used

check
Location: Land-pl
Price: 37.500 €

SCHRÖDER MAK3 3000/4.0 sheet metal folding machine was built in 2013 in Germany by Hans Schröder Maschinenbau GmbH. The machine is designed for the precise folding of sheet metal with a maximum length of 3000 mm and a thickness of 4 mm. It enables repeatable bends at a specified angle, making it suitable for the production of sheet metal components with various geometries, used in many industries. The folding process involves clamping the sheet metal against the worktable using a clamping beam, then bending the protruding section with a folding beam. The mechanical drive used provides the force required to effectively fold the sheet metal along the machine’s entire working length. Operation of the machine is facilitated by the SCHRÖDER POS 2000 controller, which enables quick programming of working parameters. The SCHRÖDER MAK3 mechanical folding machine weighs 4150 kg. Tech ...

sheet metal working / Folding Machines
19.10.2026
approved
dealer
item-No.: 162745655
New in: 2007

used

check
Location: Land-de

Gr. working width: 4040 mm for sheet metal with a strength of 40 kg up to: 3 mm Upper bolster adjustment: 400 mm Underbeam adjustment approx.: 80 mm Max. bending angle adjustment electrically up to approx.: 180° Upper bolster variable speed drive: 4 kW Bending beam drive: 2 x 3 kW Back gauge, working range: 10 - 750 mm electr. Connection: 400 V Weight: 9 t Space requirement: 5570 x 2250 x 2000 mm high

sheet metal working / Folding Machines
23.06.2025
item-No.: 162713148
New in: 2012

used


sheet width: 3020 mmplate thickness: 2,00 mmdistance between columns: mmthickness - aluminium: 4,00 mmthickness at Niro-steel: 1,50 mmrear stop: 1000 upper beam stroke: 200 mmbending angle: 145 °total power requirement: kWweight of the machine ca.: 4,00 tdimensions of the machine ca.: 4,30 x 2,60 x 1,90 m- Manual bending beam adjustment- Foot pedal- Total power requirement 32 AThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Folding Machines
23.06.2025
item-No.: 162708402
New in: 1980

used


sheet width: 2050 mmplate thickness: 8 mmdistance between columns: mmelectrical: . weight of the machine ca.: 6,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Folding Machines
23.06.2025
item-No.: 162706737
New in: 1991

used


sheet width: 2020 mmplate thickness: 3 mmdistance between columns: 2200 mmwork height max.: 920 mm: 250 mm: max. 180 °weight of the machine ca.: 2200 kgdimensions of the machine ca.: 3200 x 1700 x 1600 mmFurnishing:- Manual backgauge, 500 mm- ELGO control type 89The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Folding Machines
21.08.2026
approved
dealer
item-No.: 162750913
New in: 1965

used

check
Location: Land-de

used Teko manual bending machine Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 2020 mm Sheet thickness steel: 1.25 mm Sheet thickness aluminium: 2.00 mm Sheet thickness front: 0.70 mm Colour: green Dimensions: 630 x 660 x 1155 mm Machine weight: 220 kg Upper beam stroke: 140 mm without roller scissors Bending angle (max.): 120 degrees Machine number: 163/141

sheet metal working / Folding Machines
07.05.2025
item-No.: 162718046
New in: 2002

used

Location: Land-de

Motor scissors, 5 stop fingers, laser protection, with back gauge, Projection: 1000 mm, Colour: blue, Total power requirement: 3 kW, Insertion depth: 1000 mm, with roller shears, number of stands: 5 pieces, opening width: 200 mm, Bending angle: 145 degrees Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Machine Number: 8432

sheet metal working / Folding Machines
23.06.2025
item-No.: 162715128
New in: 2009

used


sheet width: 3100 mmplate thickness: / mmdistance between columns: / mmSwivelling bending machine 3100SK Folding bench Sheet metal bending machine Folding benchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Folding Machines
12.11.2026
approved
dealer
item-No.: 162745660

used

check
Location: Land-cz

Inv. Num. : 9062 Type: OHP 6 Producer: ZAKO Created: GO 2023 Parameters: Control system: FENIX Maximum sheet metal plate width: 6000 mm

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE since 1996