Model
  • page

     1
  • Next
  • 2
Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:
saws
date: 26.10.2026
approved
dealer
item-No.: 162754534
New in: 1994 used
approved TOP SELLER
Location: at

MÜLLER Olympia Universal 571 sash gang saw, year 1994. Frame width 710 mm and passage height 710 mm. High-precision, energy-efficient saw designed for stability, durability and easy maintenance. Forged high-strength steel saw frame and stress-relieved welded side frame for low vibration. Patented frame guide without continuous adhesive-oil lubrication. Split quick-change feed rollers with pressure control, synchronised lifting system, overload-protected drive clutches, machined steel flywheels and shaker chute. Overhauled 2022; last service 2024.

date: 25.09.2026
approved
dealer
item-No.: 162752773
used
approved
Location: de

Key data: 400 t

The following machines are involved: Müller-Weingarten ZE 400-16.19, 400 t double column press, approx. 1,600 × 1,300 × 1,400 mm, year of construction 1963, conversion 1991. Müller-Weingarten ZE 400-20.13.2, 400 t double column press, approx. 2,000 × 1,300 × 1,200 mm, year of construction 1977, conversion 1991.

presses / Eccentric Presses
date: 06.08.2026
approved
dealer
item-No.: 162750150
New in: 2006 used
approved
Location: de

Manufacturer: Müller Stanz- und Umformtechnik GmbH & Co. KG Type: PMLE250x1700 R-HK Engine No.: A05036-02 Year of Make: 2006 Machine Type: Eccentric Press Press force: 2500 kN Press force: 250 t Stroke rate: 20–120 min⁻¹ Stroke: 25–125 mm Plunger adjustment: 100 mm Voltage: 400 V Motor power: 55 kW Connected load: 100 kW Weight: 47,000 kg Throw cushion: No Condition: Used Machine loses hydraulic oil Several leaks present in the hydraulic area Clamping pins for plunger adjustment deactivated due to hydraulic leaks Sale without conveyor system Videos available on request Location: Freiburg

spare parts
date: 22.05.2026
approved
dealer
item-No.: 162747304
used
approved
Location: it

MÜLLER BARRELS, 200 L CAPACITY 12 Müller metal barrels, with lid and quick-release closing system. CHARACTERISTICS Units: 12 Capacity: 200 L (ca)

date: 11.09.2026
approved
dealer
item-No.: 162747229
New in: 1997 used
approved
Location: de

Offer 26149 Technical data: - Compressive force 125 t - Projection 340 mm - Table size approx. 1000 x 680 mm - Diarrhea hole in the table approx. 300 x 200 mm - Largest installation height approx. 500 mm - Tappet area approx. 600 x 300 mm - Peg hole in the tappet 50 mm - Plunger adjustability 75 mm - Stroke adjustment 20 - 180 mm - Stroke rate 80 1/min - Light barrier - Hydraulic clutch - Pneumatic dampers - Two-handed operation - Central lubrication - Separate control cabinet with control units - Pneumatic connection 6 bar - Drive 400 V / 16.5 kW - Space requirement approx. W 1700 x H 2900 x D 2700 mm - Weight approx. 9400 kg

spinning, twisting, winding, reeling, spooling machines / Warping and beaming machines
date: 07.11.2026
approved
dealer
item-No.: 162740799
used
approved
Location: pt

1 JAKOB MÜLLER direct warper type MW 650, working width up to 650 mm, maximum flange diameter 600 mm, MÜDATA control, warper supplied without creel

presses / Eccentric Presses
date: 12.10.2026
approved
dealer
item-No.: 162739672
New in: 1965 used
approved
Location: de
Price: 1.500 €

- Pressure capacity: 22 t - Projection: 175 mm - Stroke: 120 1/min - Plunger adjustment: 50 mm - Table height adjustment 50 mm - Stroke adjustment: 8-80 mm - Table: 520 x 400 mm - Plunger: 250 x 160 mm - Turnbuckle with trunnion clamping, D35 mm - Motor power 1.5 kW - Very smooth running - Mechanical disengagement of the rotary wedge coupling via pneumatic pneumatic cylinder - Pneumatic foot switch - No UVV - 4 pieces of machine feet - Connection cable CEE plug 16 A - Air connection with quick coupling - Weight: approx. 2,000 kg - Dimensions: Width 820 x Depth 1100 x Height 1800 mm

machines and plants for process engineering / Process vessels
date: 25.08.2026
approved
dealer
item-No.: 162738697
New in: 2015 used
approved
Location: ch

Mobile 150L vessel with passiv-doubleflap. In M4V steel.

other food machines
date: 06.08.2026
approved
dealer
item-No.: 162738347
New in: 2009 used
approved
Location: uk

Mueller P7505 Pure steam generator Serial: 394131-1 2009, Stainless steam generator, 5700Kgs per hour, Allen Bradley touch screen controls, two in stock, 3Ph

presses / Eccentric Presses
date: 28.02.2024
item-No.: 162687409
used
Location: de

Specifications: Capacity 300 to Stroke rate 35 strokes Plunger width 1000 mm Projection 450 mm Plunger stroke 20 - 140 mm Plunger adjustment 80 mm Engine power 30 hp Weight roughly estimated 18 tons

date: 21.10.2023
item-No.: 161970772
New in: 2007 used
Location: uk

Mueller Label Weaving Machine (Used) Model MBJ3 Year 2007 Jacquard 1152 Hooks 5800 yarns. Accessories on the machine: - 6 weft feeders 2 beams 2 cloth rollers new harness Droppers.

other textile machines
date: 05.10.2023
item-No.: 161125367
used
TOP SELLER
Location: pt

1 MÜLLER label cut and fold machine type LCFR2, year 2017

presses / Eccentric Presses
date: 18.09.2023
item-No.: 158312152
New in: 1977 used
Location: de

Specifications: - Compressive force 60 t - Projection 350 mm - Table size approx. 900 x 600 mm - Table height adjustable - Diarrhea hole in the table approx. 300 x 200 mm - maximum installation height approx. 360 mm - Stösselfläche approx. 340 x 160 mm - Cone hole in the plug 40 mm - Plug adjustability 60 mm - Stroke adjustment 10 - 90 mm - Stroke rate 110 1/min - 2 hand operation - Pneumatic connection 6 bar - Flywheel drive / speed infinitely adjustable - Rotary wedge coupling - Drive 400 V / 5.5 kW - Space requirement approx. W 2000 x H 2200 x D 2400 mm - Weight approx. 4500 kg - mechanical clamp feed MABU type ZPL 11 with 3 roller straightener

milling machines / Engraving Machines
date: 02.10.2023
item-No.: 150307212
new
TOP SELLER
Location: de

CNC Engraving Machine MÜLLER LCF - 2 Travel: X 375 mm Y 570 mm Z 90 mm Technical0.321020121002 Data: Table size 700 mm x 480 mm Weight: 50 kg Exterior dimensions: Length: 700 mm Width: 500 mm Height: 350 mm Accessories: Computer Screen Keyboard Mouse Software Control Kress cutter Vacuum pump Valve Spray Mist With this, versch. Collet and cutter - NEW

boring mills and machining centers
date: 02.10.2023
item-No.: 9307440
used
TOP SELLER
Location: de

New machine editing by: wood, plastic, PVC, Fiberglass, Plexiglas, non-ferrous metals such as aluminum, brass, etc. Technical data: Auflöstung: 0,0018 mm X-Y-Z of precision trapezoidal thread spindles 12 x 3 mm All drive spindles are without triple play ball bearings Table size: 506 mm x 320 mm Traverse paths: x 215 mm, y 375 mm, z approx. 90 mm Passage about 78 mm Prices and further sizes on request

presses
date: 25.05.2025
item-No.: 162710275
New in: 1981 used

pressure:160 t throat:500 mm stroke:200 mm distance table/ram, max. stroke up, adjustment up:500 mm table surface area:1140 x 980 mm hole in the table:180 mm table height over floor:860 mm ram surface:1000 x 800 mm oil volume:1000 l power requirement:50,0 kW weight:18,0 t dimensions (WxDxH):1,3 x 2,6 x 3,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:mechanical cutting impact cushioning:hydraulic

presses
date: 25.05.2025
item-No.: 162710304
New in: 1977 used

pressure:250 t distance between columns:1110 mm stroke:250 mm Distance table/ram, max. stroke up, adjustment up:500 mm Table surface area:1100 x 900 mm Table height above floor:950 mm Side window:690 mm Ram surface:1100 x 900 mm Oil volume:730 l Power capacity:56,0 kW Dimensions (WxDxH):2,3 x 1,55 x 3,96 m

presses
date: 25.05.2025
item-No.: 162710337
New in: 1977 used

pressure:200 t throat:360 mm stroke:560 mm distance table/ram, max. stroke up, adjustment up:780 mm table surface area:740 x 720 mm pressure of drawing cushion in table:80 t stroke of drawing cushion in table:200 mm die cushion area:530 x 530 mm table height over floor:920 mm ram surface:560 x 560 mm slide drill hole x depth:70 mm power requirement:35,0 kW weight:10,0 t dimensions:1,3 x 2,0 x 3,4 m

presses
date: 23.06.2025
item-No.: 162710736
New in: 1978 used
Location: de

Pressing force: 3150kN, table dimensions: 1250x1100mm, table height: 750mm. Fully functional, last internal inspection: Q1/2025, UVV on Q2/2024. On-site inspection is possible.

presses
date: 25.05.2025
item-No.: 162710241
New in: 1978 used

pressure:40 t throat:285 mm stroke:500 mm Distance table/ram, stroke up:630 mm table surface area:560 x 560 mm pressure of drawing cushion in table:16 t stroke of drawing cushion in table:200 mm die cushion area:425 x 425 mm table height over floor:800 mm ram surface:450 x 450 mm power requirement:11,0 kW weight:4,0 t dimensions (WxDxH):1,15 x 1,8 x 2,85 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20 light guard:Sick

presses
date: 25.05.2025
item-No.: 162710243
New in: 1986 used

pressure:63 t throat:270 mm stroke:160 mm Distance table/ram, max. stroke up, adjustment up:360 mm table surface area:560 x 490 mm hole in the table:280 x 190 mm table height above floor:850 mm ram surface:450 x 360 mm oil volume:360 l power requirement:23,0 kW weight:4,6 t dimensions (W x D x H):1,2 x 1,8 x 2,9 m

presses
date: 25.05.2025
item-No.: 162710261
New in: 1980 used

pressure:63 t throat:280 mm stroke:160 mm Distance table/ram, max. stroke up, adjustment up:360 mm table surface area:560 x 490 mm hole in the table:125 mm table height above floor:860 mm ram surface:280 x 280 mm power requirement:22,0 kW weight:3,6 t dimensions (W x D x H):0,8 x 1,7 x 2,8 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

presses
date: 25.05.2025
item-No.: 162710267
New in: 1979 used

pressure:100 t throat:320 mm stroke:160 mm distance table/ram, max. stroke up, adjustment up:480 mm table surface area:630 x 550 mm hole in the table:200 mm table height over floor:860 mm ram surface:560 x 450 mm oil volume:500 l power requirement:30,5 kW weight:6,4 t dimensions (WxDxH):1,6 x 2,0 x 2,9 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 cutting impact cushioning:hydraulic depth stop:mechanical

presses
date: 25.05.2025
item-No.: 162710269
New in: 1971 used

pressure:63 t throat:325 mm stroke:560 mm distance table/ram, max. stroke up, adjustment up:700 mm table surface area:640 x 640 mm pressure of drawing cushion in table:25 t stroke of drawing cushion in table:200 mm die cushion area:450 x 450 mm table height over floor:800 mm ram surface:560 x 560 mm oil volume:450 l power requirement:15,0 kW weight:7,0 t dimensions (WxDxH):1,2 x 2,0 x 3,1 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic

pharmaceuticals and cosmetics machines
date: 22.06.2025
item-No.: 162710192
New in: 2008 used
Location: fr

MULLER mobile lifting column/jib with 1/2 rotation of the tank Sold with 5 tanks: 1 tank of 100 liters 2 tanks of 200 liters 1 tank of 150 liters 1 tank / hopper, with valve for powder, of 90 liters, Load capacity (KG): 150, Weight (kg): 490, Maximum height at the axis (mm): 2500, Maximum lifting height at the axis (mm): 2500, Link to manufacturer: .mueller-group/en/processing/product/mobile-lifting-column.html

presses
date: 23.06.2025
item-No.: 162718243
used
Location: de

Pressing force: 100t, throat depth: 300mm, stroke speed: 60/min, stroke adjustment: 10-100mm, motor power: 7,5hp.

presses
date: 23.06.2025
item-No.: 162718247
New in: 1992 used
Location: de

Max. ram force: 1600kN, length: 3170mm, width: 2500mm, height: 5080mm, weight: 23t, with documentation.

date: 23.06.2025
item-No.: 162720003
New in: 1978 used

pressure: 63 t throat: 280 mm stroke: 160 mm table surface area: 560 x 500 mm ram surface: 280 x 280 mm dayligth: 400 mm oil volume: ca. 360 l total power requirement: 22 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 1,45 x 1,75 x 2,67 m - Workroom enclosure with Sick light barrier - Large ram with ejector and pin clamp - foot switch - Motorized depth stop in the cylinder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Hydraulic Presses
date: 26.08.2024
item-No.: 162697946
New in: 1966 used
Location: de
Price: 999 €

pressure: 2 t distance between columns: - mm stroke: ? mm throat: ? mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m hydraulic press 2t Drive: 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

post press: cutters and guillotines
date: 23.04.2024
item-No.: 162693537
New in: 1985 used
Location: de

max. paper size: 30x21 cm serial no.: 1888 voltage: 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)