152 OKUMA used machine for sale

Key data: 210 mm, 400 mm

Okuma LT 2000 EX 2T 2M 2Y Big Bore Steuerung/ Control : OSP P 200 L , kein IGF One Touch Advance Year of manufacture / YOM : 09/ 2011 Power On : approx. 13000 [h] Spindle running time : [h] : Location: Availability /: from stock Sweden Condition / technical condition : 9 / 10 TECHNISCHE DATEN / TECHNICAL DATA: Max. turning length / max turning length : [mm] 700 Hauptspindel / Main Spindle Turning dia : [mm] 210 Max. turning dia over bed : [mm] 400 max. RPM/ spindle speed : [1/min.] 6000 Spindle bore / spindle bore : [mm] full clamping cylinder Drive power / spindle power : [kW] 22/15 max. rotation speed 6000 rpm Travel XA / XB axis : 205 mm Travel ZA / ZB axis : 700 mm Travel W axis : 730 mm Travel YA / axis : 95 mm Travel YB / axle : 95 mm C-axis : 2 x 0.001 degrees/degree Counter spindle / subspindle max. speed/ spindle speed : [1/min.] 6000 S ...

Key data: 420 mm, 1250 mm, 3500 1/min

Stock number: 3859 CNC LATHE Manufacturer: OKUMA, Type: LB 25 II x 1250 Machine NO.: 0202, Year of manufacture: 1995 Specifications: Max. circulation diameter 420 mm dia. Max. turn. About Bed 620 mm Dia. Turning length 1250 mm Main spindle speed range 65-3500 rpm Bore through drawing tube 73 mm dia. Spindle bore 80 mm dia. X axis movement 300 mm Z Ash Movement 1275 mm Tool turret with 12 stations Control OSP 7000 Fabr. Operating hours Spindle 16987 - New spindel bearings at 14.500 hours Hours Accessories: Hydr. Chuck Main Spindle Kitagawa B-212 - 12 mm dia Various tool holders. 12 Tool setter Hydraulic tailstock. Length: 4250 mm, Height: 2150 mm, Width: 2200 mm, Weight: 7400 kg

Stock number: 3854 Angetribende Tool Manufacturer: Benz , Type: 114EA04941E6 Machine NO.: 9, Specifications: VDI-40 Size Straight Insert Type ER32 Speed max 4500 rpm Motor power driven tools 50 Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3853 Angetribende Tool Manufacturer: Benz, Type: 114EA04941E6 Machine NO.: 8, Specifications: VDI-40 Size Straight Insert Type ER32 Speed max 4500 rpm Motor power driven tools 50 Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3852 Angetribende Tool Manufacturer: Eppinger , Type: 4.200.952 Machine NO.: 7 - 296747-1 Specifications: VDI-40 Size Straight Insert Type ER32 Internal Cooling Motor power driven tools 50 Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3851 Angetribende Tool Manufacturer: WTO, Type: 410520135-40 Machine NO.: 5, Specifications: VDI-40 Size Winckel 90 Insert type ER32 - K19-09608-1.1 Internal Cooling Speed max 6000 rpm Motor power driven tools 63 Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M

Stock number: 3850 Angetribende Tool Manufacturer: Eppinger , Type: 4.201.099 Machine NO.: 5, Specifications: Size VDI 40 Winckel 90 Insert Type ER32 Internal Cooling Speed max 5000 rpm Motor power driven tools 70 Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3849 Angetribende Tool Manufacturer: Eppinger , Type: 4.201.109 Machine NO.: 3, Specifications: Size VDI 40 Winckel 90 Insert Type ER32 Internal Cooling Speed max 5000 rpm Motor Power Driven Tools 70Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3848 Angetribende Tool Manufacturer: Eppinger , Type: 4.201.109 Machine NO.: 2 Specifications: Size VDI 40 Winckel 90 Insert Type ER32 Internal Cooling Speed max 5000 rpm Motor Power Driven Tools 70Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3846 Angetribende Tool Manufacturer: Eppinger , Type: 9.654.088 Year of construction: 0 Specifications: VDI-40 Size Winckel 90 Insert Type ER32 External Cooling Speed max 5000 rpm Motor Power Driven Tools 40Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Key data: 550 mm, 1500 mm, 2800 1/min

Control OSP 7000L Max. turning diameter 550 mm Turning length 1500 mm Spindle speed 2800 min-1 12-speed revolver with attached Competition. Lower turret 10-speed Tailstock 3-jaw chuck diameter 500 mm Conveyor

Key data: 300 mm, 450 mm, 3000 1/min

Control OSP P20L-R Max. turning diameter 300 mm Max. turning length 450 mm Spindle speed 3000 min-1 3-jaw chuck diameter 210 mm 12-speed revolver with attached Competition. Conveyor

For sale: Japanese Okuma CNC lathe type LU-300M, equipped with an OSP-E100L controller including IGF dialog programming. This CNC lathe is equipped with an upper and lower turret. The upper turret has 12 positions and driven positions. The lower turret has 8 positions and no driven positions. The recording is a VDI-40 recording. The machines are equipped with a tool presetter and a tailstock. The turning diameter above the bed is 530 mm, the maximum turning diameter is 339/180 mm, with upper and lower turret. The maximum turning length is 570 mm. The Z-axis movement is 640 mm. The maximum speed on the main spindle is 3,800 rpm. Spindle nose mount A2-6, chuck size 250 mm, rod passage 50.8 mm. Main engine power 22 kW. The machine also has a workpiece collecting device and a chip conveyor with right-hand ejection. The machine can still be viewed under power and will be available in Octo ...

Okuma Twin-Star LT300 MY with 2 equivalent main spindles and tool turrets (2x12) Speed range: 38-3,800 rpm. Torque: 420 Nm with CNC control Okuma OSP-P200L with tool monitoring system for tool life and breakage with control expansion kit One-Touch-IGF-M-D Gravity Belt Filter SPB4 Coolant pump 20 bar, 40 l/min. 2 x Kitagawa B208 power clamping device Full clamping cylinder programmable right + left Y-axis with stroke for driven WZ stations Interface + servo drive integrated for loading portal Loading portal MIDI diam. 200 x 150 mm Pallet stacking magazine PSM 100/20 Workpiece shuttle, stacking table extension Connection nozzle for air filter (preparation) Turning diameter 350 mm (550 mm above bed) Speed range: 38-3,800 rpm. Torque: 420 Nm Year of construction 07/2011 Operating hours: 25,871 h / Spindle running time: 24,773 h At the end of last year, almost € 6 ...

Stock Number: 3789 CNC LATHE Manufacturer: OKUMA, Type: LVT 300-M - Vertical Machine NO.: 132230, Year of manufacture: 2007 Specifications: Max. swing diameter 280 mm dia. Turning length 200 mm Main engine power 22/15 kw Main spindle speed range 40-4000 rpm C axis - main spindle movement 0.001 degree Tool turret with 12 stations Driven werkzeuumdr. 40-4500 rpm Control OSP 200 Fabr. Operating hours spindle 11485 hours Accessories: Load and Unload device Tool setter Chip conveying. Cooling water system. Length: 2800 mm, Height: 2500 mm, Width: 1500 mm , Weight: 5600 kg

Condition Used Good Condition Control Type OSP P300S Maximum workpiece vaulting Ø 2.400 mm Turning diameter max. Ø 2.000 mm workable length 1.200 mm X axis 1.600 mm Y-axis 1.200 mm Axis C 360° Rapid feeds X-Y 16 mt/min - C 10 mt/min Spindle speed 200 rpm Spindle power 30/22 Kw Spindle nose Ø 380 mm flat Tool turret 36 positions Tool connection BT 50 Chip Evacuator Accessories

Used Good Condition Control Type OSP-P200L X axis stroke 690 mm Y-axis stroke 230 mm Z axis stroke 1.545 mm Axis C 360° Axis B 225° Max workpiece vault Ø 630 mm Max. workable diameter Ø 710 mm workable length 1.500 mm Main spindle speed 38-3,800 rpm Spindle nose A2-8 Tool magazine 20 Chip Evacuator Accessories

Okuma MC 4 VA, Year of construction 1989, Control Okuma OSP 5000 M-G, X/Y/Z travel 650/410/450 mm, Tool changer 20-fold, Recording MAS BT 40, Table size 1000 x 510 mm, Speed range up to 6,000 rpm, 2-stage gearbox, Rapid traverse X/Y 15 m/min, Rapid traverse Z 13 m/min, machine weight 5700 kg,

Max. turning diameter [mm]: 650 Max. turning length [mm]: 1,500, 2,000 Spindle speed [min-1]: 3,000, [4,200] No. of tools: 40 [80], [120], [180] Motor [kW]: 22/15, [32/22] Features: W (Sub spindle), 2S (2 saddle), 2SW, ATC

Max Turning Diameter (in): 16.14 Max Turning Length (in): 13.78 [23.63, 39.37] Spindle Nose Type: A2-6 [A2-8, A2-11] Speed Range (min⁻¹): 50~5,000 [42~4,200, 30~3,000] Standard Power (hp): 30/20 Rapid Traverse X/Z (ipm): 984/1,182

Stock Number: 3788 CNC LATHE manufacturer: OKUMA , Type: LVT 400 M - Vertical Machine NO.: 134682, Year of manufacture: 2007 Specifications: Max. swing diameter 480 mm dia. Turning length 300 mm Main engine power 22/15 kw Main spindle speed range 35-3300 rpm C axis - main spindle movement 0.001 degree Tool turret with 12 stations Powered stations turret 1 12 pieces. Driven werkzeuumdr. 30-3000 rpm Control OSP Fabr. Controlled in 3 axes Operating hours spindle 14910 hours Accessories: Load and Unload device Hydr. Chuck Main Spindle OSP P-200 3D-M Kit mm dia Tool setter Chip conveying. Cooling water system. Length: 3500 mm, Height: 2680 mm, Width: 2800 mm, Weight: 9,100 kg

Inv. Num. : 6180 Type: LFS 10 – 2SP Producer: OKUMA Produced: 1999 Parameters: Control system: OSP 7000 L Switch-on hours: 35000 h turning diameter: 120 mm Maximum turning diameter over bed: 400 mm Axis X: 130 mm Axis Z: 145 mm Length: 1900 mm Width: 1760 mm Height: 2500 mm Weight: 4800 kg Equipment: Conveyor Tool holder

Type: LT200-MY Twin Star Year of construction: 12/2006 Commissioning: 2007 Control: OSP – P200L Delivery time: ex stock The lathe is in very good general condition. Due to the basic and additional equipment, this used machine is versatile. With the automatic bar feeder, the double turret equipment, the additional Y-axis and the parts catcher, the machine produces your workpieces completely independently. From start to finish. Due to the equipment with main and counter spindle, production can be economically effective and fast. Machinery Collet chuck SMW on both sides Main and counter spindle Y-axis Conveyor Bar loading magazine Turbo 5-55 Parts catcher - B-turret with swivel ejection to the collection box (at the door). Onward transport by internal parts conveyor belt. Technical details Swing diameter: mm 400 turning diameter: mm 210 turning length: mm 960 2 tool ...

:::SPECIFICATIONS::: CNC Model: Okuma OSP CNC version: U100 - L Spindle nose: ASA 6 Spindle power: 22Kw Main spindle revolutions: 5000 Turning diameter: 630mm Bar clearance: 51mm Turning length: 1170mm Number of tools: 44 Tool connection: HSK 63 Spindle power: 7,7Kw Number of spindle revolutions: 6000 X Axis Stroke: 475mm Y axis stroke: + - 80mm Z Axis Stroke: 1155mm Swivel B-axis travel: 0.001degree Rapid feeds linear axes X Y Z: 40m/min High cooling pressure: yes Pressure value: 120bar System with external tank with filter: yes Number of Tool Turrets: 1 Number of tool places before turret: 12 First turret tool attachment type: VDI Counter-spindle: yes Number of counter-spindle revolutions: 6000 Counterspindle power: 22Kw Bar clearance: 32mm Z stroke counterspindle : 1180mm Model and brand bar magazin ...

OKUMA MA – 400 HA hours switched ON 37572 Hours spindle rotating 16725 Horas Year 2007 Okuma Lathes Okuma LU 15 M – 1000 OKUMA LB 15 OKUMA Multus B300 Okuma VTM 200 OKUMA Genos L3000 MA-550VB; MA-650VB; MA1250; MA12500; MA40; MA400; MA50; MA500; MA550; MA60; MA600 MA6005; MA600HBII; MA650 Okuma LU 15 M – 1000 OKUMA LB 15 OKUMA Multus B300 Okuma VTM 200 OKUMA Genos L3000 Okuma GI-20N OKUMA Multus B300 Okuma LU 15 M - 1000 OKUMA LB 15 Okuma VMC MC-V4A with 4th axis Okuma ACE Center MF-46VA OKUMA LB 15 OKUMA VTM 1200 YB OKUMA MX 45 CNC Machining Centre OKUMA LB15 Okuma LU 45 M OKUMA LT 300 M Okuma MX45VAE Machining Center Okuma VTM 200 1ST OKUMA LT 25-MY CNC Lathe Okuma MX 40 HA OKUMA LB 15 OKUMA MA-50HB OKUMA GENOS M460R-VE Okuma LC 40 Okuma LC 40 OKUMA MC-4VAE OKUMA Twin Star LT 300 M OKUMA MC 40 VA Okuma LR 15 2S 600 Okuma ...

Make OKUMA WITH A NEW SPINDEL IN 2019 - RUNS ONLY 6 MONTHS AFTER WAS CHANGED MOTOR AND SPINDLE type MX 45 VAE Year of manufacture 2001/3 CONTROLS: OSP - U100M Technical Details x-way 762 mm y-way 460 mm z-way 450 mm total power requirement 35 kW machine weight approx. 5000 KG Type: MX - 45 VAE Control: OSP - U100M working range: Axis X: 762 mm Axis Y: 460 mm axis Z: 455 mm Spindle speed range: 50 - 7 000 rpm VARIABLE SPEEDS ATC: TOOL BT 40 TOOL MAGAZINE 20 TOOLS tool magazine: 20 pcs. Total power requirement: 35 kVA LAST SERVIS ON SPINDLE ON 2019 - ( BRAND - NEW SPINDLE) COST OF SERVICE OWER 35000 EUR , MACHINE WAS WORKING FROM THAT TIME ONLY HALF YEAR. WE ORGANIZE FOR CLIENT AS WELL TRANSPO

- Control OPS-P200 - Operating hours 3,600 h - max. machining dimensions 760x460 mm - max. loading weight 700 kg - table dimensions 1000x460 mm - travel X= 762, Y= 460, Z= 460 mm - distance table-spindle 150-610 mm - max. speed 15.000 rpm - tool capacity: 32 - tool holder MAS BT40 - internal coolant supply - dimensions LxWxH: 3100x2510x2750 mm - weight: 7.500 kg

Code 5284 UMSCHREIBUNG CNC Bohrmaschine Fabrikat Okuma Typ DCN - 4 Maschine Nr. 55020239 Steuerung OSP - 330 Diameter Aufspantisch (4x) Ø 400 mm Einbauhöhe Tisch-Spindel 400 – 200 mm Spindel Hub 200 mm Schnellgang vertikal 12.000 mm/min. Vorschübe 5 – 1200 mm/min. Spindeldiameter 45 mm Spindelaufnahme MK 3 Anzahl Spindelstufen 8 Stufen Geschwindigkeiten 125 – 3150 UpM Anzahl Werkzeugaufnahmen 10 St. Motor 1,5 kW 380 Volts Maschinemasse ( L x Br. ) 1540 x 1750 mm Höhe 2100 mm Gewicht 2000 kg Zustand normale Zustand

Table size: 460 x 1000 mm traverse path x/y/z: 762/460/460 mm spindle retainer: MAS BT 40 ISA kl. / gr. Table/spindle distance: 150/610 mm spindle speed: 15000 rpm number of tool positions: 32 pieces spindle drive: 22 kW Electr. Supply: 400 V kW space: 3100 x 2500 x 2750 mm weight: 7500 kg

Table size: 460 x 1000 mm traverse path x/y/z: 762/460/460 mm spindle retainer: MAS BT 40 ISA kl. / gr. Table/spindle distance: 150/610 mm spindle speed: 15000 rpm number of tool positions: 32 pieces spindle drive: 22 kW Electr. Connection: kW 400 V