Key data: 3000 mm, 12 mm, 8 mm
Precision laser cutting machine Trumpf TRUMATIC L 3030 with TRUMPF laser TLF 2600turbo, CNC path control TRUMAGRAPH CC220S, electrical equipment for three-phase 400 V / 50 Hz, Also equipped with: TRUMP HI-LAS High Pressure Cutting Autofocus function AUTO-LAS Sheet Metal Layer Detection Cat-Eye Oil Spraying Device Additional. Laser cutting head for Quick Switch with 7.5-inch lens Lens tube for 7.5 VA applications Workspace lighting Expansion of part program memory from 448 kB to 1.0 MB Pipe cutting device RotoLas II First support - base support with sliding device Programming ToPs 100 / 400 Regularly maintained, very good condition, is still in operation
Press brake TRUMPF TrumaBend V 230 Year of construction: 2003 Working width: 3,000 mm Pressure: 230 To Stroke: 365 mm Operating pressure: 305 bar Delay time: 95 ms Safety distance: 190 mm Weight: 18.210 kg Voltage: 3 x 400 V Nominal current: 68 A Frequency: 50 HZ Connected load: 27.2 KVA Compressed air: 6 BAR Stop: 2 x X, 2 x Z, 2 x R – Axis, 2 x Y 1x sliding matrix
Manufacturer: Trumpf Type: TruDisk 5001(6C) Year of construction: 2018 Laser power: 5 kW Wavelength: 1030 nm Beam quality: 4 mm mrad Location: Dresden Optionally, the laser optics PFO 33-2 R1030-1070 HA as well as other accessories are available from us!
Key data: 3000 mm
Trumpf, Trumatic TC L3030, control Siemens, with pallet changer, incl. loading station, Sheet thickness : Steel: 20mm, Alu 8mm, VA 12mm,
Key data: 170 t
Trumpf Press Brake Trumabend V170, 1700KN, stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,
Key data: 170 t
Trumpf Press Brake Trumabend V170, 1700KN, stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,
Inv. Num. : 6193 Type: CO 3030 L20 Producer: TRUMPF Created: 2010 Parameters: Control system: Siemens Laser ON: 70501 Beam ON: 27564 Laser power: 6 kW Work table length: 3030 mm Work table width: 1500 mm Maximum sheet thickness when cutting (stainless steel): 20 mm Maximum sheet thickness when cutting (aluminum): 25 mm Equipment: ROTOLAS According to GO. Availability 2Q/2023.
TRUMPF TruLaser Cell 7040 3D laser built in 2015 in Germany is the ideal solution for versatile cutting, welding and laser metal deposition (LMD). For all these tasks, the TRUMPF 3D laser cutting machine uses the TruDisk 4001 semiconductor laser and a specially designed 3D head with 5 axes, which can machine not only flat workpieces, but also tubes, closed profiles and very complex shapes. All of this makes this extremely technically advanced machine capable of tackling any challenge in the broad field of automotive engineering. The workpiece placed on one of two work tables is machined by an extremely stable laser beam with a power of up to 4 kW. During machining, the head moves in the three-dimensional cartesian coordinate system and rotates in two axes in the polar coordinate system. This is what gives the universal 3D laser its extraordinary quality and precision, impossible to ac ...
Extra Accessories: SheetMaster Sheet Metal Supplier The machine is also working at the moment Make: Trumpf Type: Trumatic 6000L Year of construction: 2006 Hours: 90,119 Travel – x – 3085 mm Travel – y – 1550 mm Travel – x (combined) – 2500 mm Cutting capacity for mild steel – 8 mm Cutting capacity for stainless steel – 6 mm Cutting capacity for aluminium – 4 mm Workpiece – 230kg Punching force - 180 KN Punching speed – 917 1/min Watt laser power: 2700 Dimensions (LxWxH): 8400x8500x2200 mm
Trumpf Lasercell 7040 laser cutting machine / 5-axis, Year of construction 2008, Control Siemens 840 D, Laser power 6 KW, Table length 4000 mm Table width 1500 mm Burner Heads 1 max. cutting capacity sheet metal 20 mm, max. cutting capacity VA 20 mm, max. cutting capacity AL 15 mm, Enclosed engine room Laser TruFlow 6000 Htzhtpszv ADC Cutting Head Positioning Laser Diode Suspended control panel stationary, rotatable Teachpanel Magnetic coupling, head detection Laser Power Control Performance Cycles Laser welding Total power requirement kW Speed 10 m/min Machine weight approx. 19 t Space requirement approx. 9.5 x 7.3 x 3.1 m
Key data: 200 mm
used press brake Trumpf TruBend V200 + BendMaster 60 Year of construction 2004 Pressing force max: 2000kN Stroke max: 365 mm Operating pressure max:340 bar 1 piece B0401A0009 = BendMaster 60 1 piece B0106A0073 = TRB V200-6A 1 piece of protective housing incl. lighting 1 piece of BendMaster roadway 14 meters in 2 meter segments 1 piece of system control system trump
Inv. Num. : 6118 Type: Liftmaster L3030 Producer: TRUMPF Created: 2002 Parameters: In good technical condition.
Inv. Num. : 7033 Type: Trumatic 2020 R FMC Producer: Trumpf Created: 2007 Parameters: Compressive force: 18 t Maximum length of sheet plate: 2070 mm Maximum blade width: 1280 mm Max. sheet thickness: 6.4 mm Maximum punching speed: 60 1/min Punching diameter: 76 mm Machine height: 2080 mm Machine length: 6000 mm Machine width: 5600 mm Machine weight: 8000 kg
Key data: 3000 mm, 1500 mm, 3200 W
Trumpf TC L 3030 laser cutting machine, Built in 2005, Siemens Sinumerik 840 D control system, Travel X/Y/Z 3000/1500/115 mm, Resonator Laser Beam A 24616 h, Laser Type TLF 3200 Turbo, Laser power 3200 W, X/Y/Z travel speed up to 60 m/min, sheet thickness up to 20 mm, VA up to 12 mm, Al up to 8 mm, high-pressure cutting, Laser cutting head 5 and 7.5, pallet changer,
TRUMPF TRUMATIC L3030 laser cutting machine manufactured in 2005 in Germany, provides efficient laser cutting while maintaining low operating costs. To machine workpieces, the machine uses a stable 2 kW laser beam, which, guided by a mirror system, achieves extremely smooth and even edges over the entire cutting length. The head and mirrors are mounted on movable components. The TRUMPF laser cutting machine also boasts an extremely stable and rigid work table with a large surface area, which is additionally equipped with an integrated automatic pallet changing system. This solution allows for simultaneous loading and unloading of workpieces during the machining process, which significantly increases production efficiency and reduces machine downtime to a minimum. All this makes the TRUMATIC L3030 laser ideal for even the most demanding applications in any production facility. The tota ...
Offer 23435 Specifications: - Max. working length 1270 mm - Column passage 1040 mm - Max. pressing force 500 kN - Distance table / ram 410 mm - Stand projection 410 mm - Plunger stroke 215 mm - Lifting speeds - Downward speed rapid traverse 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 - 10 mm/sec - Total drive power 8 kVA - Pneumatic connection 6 bar - Space requirement approx. W 2000 x H 2400 x D 2100 mm - Weight approx. 4800 kg - with: - CNC control DELEM , DA 65 - Y1 + 2 ; X ; R ; Z - Footswitch - Controlled back gauge with height adjustment 5 - 500 mm - 2 support arms - hydr. Tool clamping - Matrix table displacement pneumatically supported
TRUMPF TruLaser 3030 laser manufactured in 2007 in Germany, is the best choice for any production facility. This reliable and highly efficient machine provides excellent laser cutting quality while maintaining low operating costs, thanks to the use of a reliable laser source with the highest energy efficiency. The stable 2 kW laser beam makes the workpiece edges extremely smooth and even after machining. Machining is performed on a high-quality work table with an integrated automatic pallet changing system. This system allows simultaneous loading and unloading of workpieces during the cutting process, resulting in increased production efficiency and significantly reduced machine downtime. The TRUMPF laser cutting machine weighs approximately 11500 kg. Technical data of the TRUMPF TruLaser 3030 laser cutting machine - laser power: 2 kW (2000 W) - feed rate in the X/Y/Z axis: 3104/ ...
TRUMPF TruLaser 3030 laser cutting machine built in Germany in 2007 provides excellent laser cutting quality while maintaining low operating costs. Designed for even the most demanding challenges, the machine machines workpieces with a maximum thickness of 12 mm with high precision and quality, making it suitable for any production facility. The stable 2 kW laser beam used during cutting produces very smooth and even edges along the entire length of the workpiece, regardless of the type of material. To further improve the workflow and reduce machine downtime to a minimum, the work table is equipped with an integrated automatic pallet changing system which allows workpieces to be loaded and unloaded simultaneously during the cutting process. The TRUMPF laser cutting machine weighs approximately 11500 kg. Technical specifications of the TRUMPF TruLaser 3030 laser - laser power: 2 kW (2 ...
Key data: 230 t, 3060 mm, 2690 mm
- Trumpf DA65 control - Year of construction 2000 Specification - Pressing force: 2300 kN - Bending length: 3060 mm - Installation height: 535 mm - Inclination: ± 10 mm - Free column passage: 2690 mm - Projection: 410 mm - Working height with lower tool 100 mm: 1050 mm - Table width: 200 mm - X-axis travel: 600 mm - Max. stop range X-axis: 860 mm - R-axis travel: 250 mm - Z-axis travel: 2310 mm - Stroke: 365 mm - Rapid traverse: 200 mm/s - Operating rate: 1 - 10 mm/s - Retraction: 135 mm/s - Hydraulic oil volume: 400 l - Electrical: 37 kVA - Pneumatic: 6 (±1) bar - Dimensions WxHxD: 3660 x 3095 x 2310 mm - Weight: 18210 kg
Key data: 3000 mm, 1500 mm
Ref.Nr. 00775 Price only 17000 Euro as the system has to be removed from the hall by February 5, 2024 Name of the system CO2 laser cutting machine Manufacturer Trumpf Model TruLaser 5030 Classic Year of construction 2008 Working area 3000 x 1500 x 115 mm Control 840 D Laser on - Operating hours Aug 2023 81,378 h Beam On - Laser Cutting Hours Aug 2023 25,890 h Laser unit TruFlow 5000 Laser power 5000 watts
used
MASCHINENTYP : TruLaser 5030 Fiber (L41) HERSTELLER : Trumpf BAUJAHR : 2010 BETRIEBSSTUNDEN : NC:57796h Laser Ein: 37360h ARBEITSBEREICH : 3000 x 1500 x 115mm LASERLEISTUNG : 3000W STEUERUNG : Siemens Sinumerik 840D SL STANDARTAUSTATTUNG : • Geschlossener Maschinenrahmen mit integriertem Laseraggregat • Torque Antrieb in Kombination mit Linear Direktantrieben • Geschlossene Strahlführung per Lichtleiterkabel (LLK) • Maschinenkühlaggregat • Integrierte Schaltschränke mit Innenbeleuchtung • Automatischer Palettenwechseler in Längsrichtung • Breites Längsförderband • Arbeitsraumbeleuchtung • Positionslaserdiode • Sprüheinrichtung • PierceLine • FocusLine • NitroLine • PlasmaLine • Automatische Düsenreinigung TRUMPF Laser : • Festkörperlaser TruDisk 3001 mit ei ...
MACHINE WAS ORDERED BARND NEW FROM THE 1. ST OWNER MACHINE IS STILL ON POWER WORKING DAYLY ORDERS LASER POWER : 2000 W MAX SHEET THICKNESS: 4 mm MAX PUNCHING FORCE: 165 kN ATTACHED VIDEO FOR CUSTOMER WE CAN ORGANIZE DISMANTLING, TRANSPORT
Laser power: 3200 W Working area (X x Y): 3000 x 1500 x 115 mm Z-axis (DIAS): 115 mm Max. sheet thickness: Mild steel: 20 mm Stainless steel: 12 mm Aluminum: 8 mm Max. workpiece weight: 840 kg Max. axis speeds: Parallel axis: 60 m/min Simultaneous: approx. 85 m/min Accuracy: Smallest programmable displacement: 0.01 mm Position deviation: +/- 0.1 mm Average position spreading width: +/- 0.03 mm With TCL 3030 TRUMPF CNC path control based on the SIEMENS SINUMERIK 840D Laser consumption values: Laser Gas CO2: 1.0 l/hour N2: 6.0L/hour He: 13 L/hour Compressed air: 42 m³/h = 700 l/min Machine with Liftmaster
TRUMPF TruLaser 3030 laser cutting machine was built in 2009 in Germany. The machine designed for cutting workpieces made of steel or aluminium, is ideal for any production facility where precision and the quality of the manufactured parts are the highest priority. The workpieces are machined by an extremely powerful laser beam which, in combination with extensive equipment, allows for rapid cutting of thin sheets with a thickness of up to 1.5 mm. This ensures that the finished workpieces have perfectly smooth and even edges, regardless of the machined material. The offered equipment includes an easy-to-use SIEMENS SINUMERIK 840D CNC controller with 500 MB memory for NC programmes, a table with hydraulic pallet changer and three cutting heads. The TRUMPF TruLaser 3030 Basic Edition laser cutting machine weighs 10500 kg. Technical specifications of the TRUMPF TruLaser 3030 laser - max ...
Sword Saw Hand Saw Trumpf TPC 150-2 for Cutting Sandwich Panels Location of the machine: 76661 Philippsburg The machine can be viewed on site. It works perfectly. You can arrange a viewing appointment at any time. We'd love to hear from you.
Key data: 1500 mm
Trumpf TruLaser 5030 + Liftmaster LMZ3050 - CO2 Laser Cutting Machine + Loading & Unloading System Laser power:6000 W Working area:3000 x 1500 mm - Trumpf Liftmaster LMZ3050 automatic loading and unloading system - Siemens Sinumerik 840 control system - Trumpf TruFlow 6000 laser source - Laser power 6 kW - Table size 3000 x 1500 mm - Interchangeable table - Hinge belt conveyor - Operating hours beam: approx. 31000 h - Laser operating hours: approx. 57000 h - Year of construction 2013
Spare parts kit 1975863 consists of (see pictures) Errors in the technical data and prior sale excepted.
Manufacturer: TRUMPF Type L 2525 Year of construction 2007 Working area 2,500 x 1,250 x 115 mm Siemens Sinumerik 840D control system Laser power 3,200 watts Accuracy +/- 0.1 mm Equipment: Rotolas Enclosed machine frame PCS Automatic pallet changer Longitudinal conveyor belt for small parts/waste Laser Power Control Siemens control system: open PC-based control, easy operation, online help, diagnostic functions, maintenance hole book, technological data, teleservice Safety: Multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin DIAS Height Control AutoLas Plus automatic focus position adjustment Network connection (RJ45) by installation via teleservice The machine is in good condition. Location Germany, viewing by appointment. Errors in the technical data a ...
used press brake Trumpf TrumaBend V320 Year of construction 198 Bending length: 4100 mm Working stroke height: 365 mm Back gauge: 6 axes Bending aid: 2 pcs.
