Welding edge shaper Offer number: 20122 Make: TRUMPF Type: TKF 104 - 0 Machine Number: 4522206 Built: ca.2006 Technical data: min. / max. material thickness 3 - 25.0 mm Bevel angle Standard 30 - 37.5 - 45 max. bevel length steel 400N/mm2 11 mm max. bevel length steel 600N/mm2 9 mm max. bevel length steel 800N/mm2 6 mm smallest inner radius 50 mm smallest pipe inner diameter 80 mm Working speeds 2.5 m/min Stroke number 400 rpm Drive 400 V / 2000 Watt Space requirement approx. W 550 x D 200 x H 300 mm Weight approx. 13 kg
Laser cutting machine Trumatic L3030 Manufacturer: trump BJ: 2005 Max workpiece length ... 3000mm Max. workpiece thickness ... 1500mm Max sheet thickness ... 12mm Laser power ... 2000w Total power demand ... 71kVA Machine weight ... 11500kg L x W x H ... 9800x5300x2000mm The machine is in good condition, possible to test under power.
For sale is a laser cutting machine TruLaser 3530. technical data: Additional details - Operating hours: Beam-On 2030 h/Laser-On 9814 h - X travel distance 3000 mm (max. 3104) - Y travel distance 1500 mm (max. 1580) - Xp travel 300 mm (max. 305 mm) - Z-travel distance 114 mm - maximum material thickness 20 mm - maintenance-free three-phase motors in X1, X2, Xp, Y1, Y2 and Z axes - maximum positioning speed axle parallel 120 m/min - Simultaneous 170 mm/min. - Acceleration when positioning X-axis 9 m/second - Xp + Y axis 15 m/second - Cutting X-axis 4 m/second - Cutting Xp and Y axis 15 m/sec. Standard - Closed machine frame with integrated laser resonator - Movement unit for optimal processing speeds - Additional highly dynamic Xp axis - Automatic pallet changer - Closed beam guide - NitroLine, high-pressure cutting - FocusLine, constant focus position - Comp ...
TECHNICAL DATA: Working range: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 2,000 watts Max sheet thickness structural steel: 20 mm Max sheet thickness stainless steel: 12 mm Max sheet thickness Aluminium: 8 mm STANDARD EQUIPMENT: â?¢ Closed machine frame with integrated laser unit â?¢ TRUMPF laser TLF 2000 â?¢ Laser unit: CO2 laser, high-frequency excited, cooling unit, logbook function â?¢ Automatic pallet changer and laengsfoerder tape â?¢ Drives: maintenance-free three-phase servo motors â?¢ Laser power control â?¢ HI-LAS high-pressure cutting â?¢ Plasma sensors PMS â?¢ Fast processing with SprintLas â?¢ ContourLas for the production of small loechers â?¢ Cutting gas pressure adjustment programmable â?¢ La ...
TECHNICAL DATA: Work area: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 3,200 watts Maximum sheet thickness mild steel: 20 mm Maximum sheet thickness stainless steel: 12 mm Maximum sheet thickness aluminium: 8 mm STANDARD equipment: -Closed machine frame with integrated laser unit -Automatic pallet changer -TFT color display -Position laser diode -Spraying device -Motion unit for high-precision machining -Additional highly dynamic axis YP -Drives with maintenance-free AC servo motors -Closed beam delivery -Conveyor for small parts and waste -NitroLine -FlyLine -Infeed end detection TRUMPF LASER: -CO2 laser TruFlow 4000 -High-frequency excitation -Maintenance-friendly Turbo centrifugal blower -Gas mixer (integrated) -Laser power control -Logbook function laser CUTTING HEAD: -Laserschneidopf with 5 "lens -Laserschneidopf ...
Alternative, new box bellows for Trumpf L3030 Siemens -from German production (it is not an original by Trump) -Y-axis (C) -Mapping: Trump ID: 1667805 / 939016 -New part
Trumpf cutting head 3.75 inch Trump ID: 911218 / 1261653 -used cutting head, technically and visually in very good condition suitable for Trumpf L3030/3050/3530/4030/4050/6030/6050
Control system: TRUMPF Power on: 35071 h Cutting time: 14638 h Laser power: 3 kW Table dimensions: 3000 x 1500 mm Travel distances: X: 3000 mm Y: 1500 mm Z: 115 mm Max. Thickness of material Mild steel: 20 mm Stainless steel: 12 mm Aluminum: 8 mm Machine dimensions: 9300 x 4600 x 2200 mm Machine weight: 12000 kg
Helix length at 40 kg / mm ° max. 10 mm Power 1800 Watt 470 strokes / min.
Nibbling machine trump, unloading 1000 mm, copying device, cutting, nibbling, slits, gills, beading, etc.
Trumpf TKF 103 welding edge shaper. 220 Volt under electricity ready for use Special price
3000 x 1500mm 6000w Auto pallet changer Siemens 840 Beam on: 17429 Laser on: 34280
Travel X/Y/Z: 3000mm/1500mm/115mm, rapid traverse: 200m/min, max. material thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm, laser source: Trumpf TLF 5000TM, laser power: 5000W (5kW). Including loading and unloading system Trumpf LiftMaster, chiller KLH L30/36-TK3.02 and power supply Hüttiger IS 30/13560. Documentation available. On-site inspection is possible.
WORKING RANGE -PUNCHING- total force (nominal): 18 to sheet thickness max. St37: 8 mm WORKING RANGE -NIBBLING- sheet thickness max. St37: 8 mm ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz
This 3-axis TRUMPF TrumaBend C110 press brake was manufactured in 2003. It features a maximum pressing force of 1100 kN and a stroke up to 200 mm. Operating at a pressure of 280 bar, this robust machine weighs 7700 kg. If you are looking to get high quality bending capabilities consider the TRUMPF TrumaBend C110 machine we have for sale. Contact us for more information about this machine.
2000 Trumpf TrumaBend V 130 Press brake Type: TrumaBend V 130 Manufacturer: Trumpf Year: 2000 With support table Pressing force : 1300 kN Stroke : 365 mm Operating pressure : 340 bar Delay : 58 ms Safety distance : 93 mm Press weight : 12950 kg Voltage 3x400 V Rated current : 47.0 A Frequency : 50 Hz Power input : 18.8 kVA Control voltage ( : 24 V Pressure air supply : 6 bar In good condition, under power. Find more here - / Contact us at -
Working hours laser on: 51942 h Working hours beam on: 29734 h Laser power: 5000 Watt Control: Siemens 840 D Working range laser: 3000 x 1500 x 115 mm Max. steel: 25 mm Max. stainless steel: 25 mm Max. aluminium: 25 mm Max. copper: 10 mm Max. brass: 10 mm Length: 9950 mm Width: 4600 mm Height: 2400 mm Machine weight: 12000 kg
Workpiece clamping diameter: 150mm, max. workpiece height: 130mm, grinding wheel diameter: 125mm, max. grinding speed: 20m/s, grinding motor power: 1.1kW, grinding motor speed: 2800rpm, machine dimensions X/Y/Z: approx. 770mm/770mm/1550mm, weight: approx. 550kg. Documentation available. On-site inspection is possible.
A Trumpf CNC laser cutting machine is available. Laser power: 2000W (2kW), travel X/Y/Z: 3000mm/1500mm/115mm, max. sheet thickness mild steel/stainless steel/aluminum: 12mm/6mm/5mm, laser type: TLF 2000TM, connected load: 63kVA. Rapid traverse X/Y: 60m/min, simultaneous rapid traverse X+Y: 85m/min. Machine dimensions X/Y/Z: approx. 10000mm/5300mm/2000mm, weight: approx. 11500kg, laser on: 90834h, beam on: 33269h. Documentation available. On-site inspection is possible.
Working area X/Y/Z: 3000mm/1500mm/115mm, laser power: 3200W (3,2kW), laser type: Trumpf Trumatic TC L 3020, max. material thickness steel: 20mm, cutting heads: 2x. Machine dimensions X/Y/Z: approx. 4600mm/9300mm/2000mm, weight: approx. 10500kg, laser hours: 56738h, beam hours: 26243h. Including cooling circuit filter unit Riedel and pallet changer. The door of the machine has an error in the acknowledgement. This can be easily solved by pressing the acknowledgement button and the cancel button. Documentation available. On-site inspection is possible.
Working range X/Y: 3000mm/1500mm, laser power: 2000W (2kW), laser type: TC L 3003, positioning accuracy: +/-25mm, min. workpiece dimensions X/Y: 1000mm/1000mm, max. workpiece weight: 530kg. Documentation available. On-site inspection is possible.
Laser: CO2, laser power: 5000W (5kW), travel X/Y/Z: 3000mm/1500mm/115mm, laser source: CO2 laser TruFlow 5000, max. sheet thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm, positioning speed: 85m/min. Machine dimensions X/Y/Z: approx. 9300mm/4600mm/2200mm, weight: approx. 12000kg, control: Siemens Sinumerik 840D, laser hours: 55509h, beam hours: 17579h. Documentation available. On-site inspection is possible.
A laser cutting and punching machine Trumpf with an unknown defect (linear amplifier in order) is available. Press force: 220kN, laser power: 1500W (1.5kW), max. punching diameter: 76mm, max. workpiece dimensions X/Y: 2585mm/1280mm, max. sheet thickness mild steel/stainless steel/aluminum: 8mm/6mm/4mm, max. workpiece weight: 200kg, part dispenser X/Y: 500mm/500mm, magazine positions: 18, machine dimensions X/Y/Z: approx. 8000mm/7500mm/2400mm, weight: approx. 16000kg. On-site inspection is possible.
Working range X/Y: 2500mm/1300mm, max. workpiece weight: 150kg, stroke rate: 900 strokes/min, max. sheet thickness: 8mm, max. punching force: 220kN, max. Punching diameter: 76.2mm, speed X/Y/simultaneous: 90m/60m/108m/min, C-axis: 360°/s, positioning accuracy: +/-0.1mm, position spread: +/-0.03mm, tool positions: 20. Machine dimensions X/Y/Z: approx. 6900mm/5800mm/2200mm, weight: approx. 11000kg, control: Trumagraph CC 220 S. The machine is not functional. Documentation available. On-site inspection is possible.
Working range X/Y: 2585mm/1650mm, punching force: 220kN, laser power: 3200W (3.2kW), max. material thickness: 8mm, max. workpiece weight: 200kg, tool positions: 21, positioning speed X/Y: 90m/60m/min, simultaneous: 108m/min. Punching capacity: 900 strokes/min, marking capacity: 2800 strokes/min, laser hours: 14061h, operating hours: 81068h. The laser equipment of the machine has not been used for 8 years, only the punching capacities. Documentation available. On-site inspection is possible. Expected to be available from the end of May 2025.
Press force: 1700kN, bending length: 4000mm, stroke: 215mm, installation height: 365mm, passage width: 3680mm, throat depth: 410mm, feed speed: 200mm/s, bending speed: 1-10mm/s, retraction rate: 135mm/s, working height: 1050mm, control: Delem. Including spare parts and accessories. Documentation available.
A Trumpf CNC laser machining center is available. Travel X/Y/Z: 1000mm/5000mm/400mm, laser type: HL383D, laser power: 300W, wavelength: 120µm, collimation: F150, optics: standard D100, operating hours: approx. 9000h, laser hours: 7500h. Including replacement cube D70, welding optics D70, new arc lamps and replacement filters. Documentation available. On-site inspection is possible.
Punching capacity: 220 kN plate thickness: 8 mm working area: 2535x1280 mm sheet thickness for stainless steel: 4-6 mm Accessories: -Setup cassettes -Table with ball rollers Youtube video link: https://www.youtube.com/watch?v=1RlPrkZPN0Y&ab_channel=BaestleinGmbH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 85 t chamfer lenght: 2050 mm distance between columns: 1750 mm control: DELEM stroke: 215 mm throat: 410 mm weight: 7.750 kg Overall size: 2700x2100x2400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
