93 offers

Manufacturer:
Manufacturer:
Your found location: Latitude 0.0 + Longitude 0.0
Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:
boring mills and machining centers / Numerically Controlled Machining Centres
30.10.2026
approved
dealer
item-No.: 162738909
New in: 2012

used

check
Location: Land-cz

The machine is in good technical condition, after prior agreement it is possible to test it. X 750mm, Y 500mm, Z 600mm. Spindle speed 10 thousand, tool magazine 22 positions, chip conveyor, cutting fluid filtration, iTNC 530 control system.. double machining center (3 axes and 5 workplace axes) AXA DBZ with rotary table SRTA2-300

boring mills and machining centers / Numerically Controlled Machining Centres
27.08.2026
approved
dealer
item-No.: 162738696
New in: 1989

used

check
Location: Land-de

Machine Type: CNC Machining Center/Milling Machine Manufacturer: AXA Type: VSC0-500 Year of Make: 1989 Condition: used Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference M-AXA-0825 DESCRIPTION We offer you a used CNC machining center from the manufacturer AXA. Available from week 37 / 2025. - Fourth axle - Tool holders - Plenty of spare parts and fourth axle from a sister machine Machine weight 3t more technical data will follow! Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

boring mills and machining centers / Numerically Controlled Machining Centres
30.10.2026
approved
dealer
item-No.: 162740559

used

check
Location: Land-cz

The machine is in good technical condition, testing is possible by prior arrangement.

boring mills and machining centers / Numerically Controlled Machining Centres
07.07.2026
approved
dealer
item-No.: 162741971
New in: 2019

used

check
Location: Land-de

Works well Machine is in Spain Standard configuration with cutting range 2500 × 1550 No. 1 Automatic CNC saw with milling unit and multi-spindle drill head, model MASTERCUT 2500 × 1550, with the following characteristics: Angle of rotation of the saw: ±90° Servo motors: Digital servo motors from YASKAWA Flywheels: Ø 800 mm made of cast iron Cleaning systems for the flywheels Saw Position Sensor Suction nozzle: Ø 150 mm Compressed air requirement: 6–7 bar Self-braking motor for the flywheels: 7.5 kW Automatic lubrication of all components Pneumatic Tensioning of Flywheels Maximum cutting length: 2500 mm Maximum cutting width: 1550 mm Maximum cutting height: 0–150 mm Minimum cutting radius (depending on the saw blade): 65 mm with 13 mm saw blade Dimensions of the saw blade: 5,450 × 13 × 0.6 mm or 5,450 × 16 × 0.8 mm  ...

boring mills and machining centers / Numerically Controlled Machining Centres
24.11.2024
item-No.: 162729034
New in: 2007

used

Location: Land-de
Price: 13.500 €

The BMV60+ redefines the standards for precision machining! The rigid structure, small footprint and precise spindle ensure consistently high quality of performance. The high speed and feed rate meet the criteria necessary for cost-effective processing. The arm tool magazine uses variable pocket coding. Linear guideways, variable speed AC spindle drives, and a digital drive CNC system are some of the standout features of this BMV60+ series machining center. Unique features: Rigid column technology Modular construction CAE-based optimal structural design for thermal stability T20 - 20 Tools Roof/Carousel Magazine Carousel Magazine Designed to adapt to different types of coolant and chip systems High-quality spindle on precision bearings eliminates vibration during heavy cutsModel BMV-60 Travel of the X-Y-Z axis 1050 x 610 x 610 mm Spindle per ...

boring mills and machining centers / Numerically Controlled Machining Centres
24.11.2024
item-No.: 162729035
New in: 2007

used

Location: Land-de
Price: 15.500 €

Table Size 1700 x 710 mm Headstock Travel 810 mm (Z-axis) Height of the machine 4000 mm Table longitudinal displacement 1600 mm (X-axis) Table transverse travel 910 mm (Y-axis) Spindle to tabletop 150 - 960 mm Distance from the floor to the table 1150 mm Distance between spindle center and column front 825 mm T - Groove No. 5 T - Groove Size 18 mm T - Groove Pitch 125 Max. load on the table 2000 kg Spindle cone BT-40 Hourly spindle speed 6000 rpm Footprint (L x W) 4300 x 3400 mm Weight of the basic machine 14500 kg Total connected load 40 kVA (basic standard machine), 50 kVA (basic standard machine with high power

boring mills and machining centers / Numerically Controlled Machining Centres
14.11.2026
approved
dealer
item-No.: 162755443
New in: 2025

new

check
Location: Land-hk

BRETON ULTRIX E2 – 5-AXIS TURNING & MILLING CENTER (ITALY) New 5-axis multifunctional machining center designed for high-precision and heavy-duty turning and milling operations. Suitable for aerospace, turbine engine, die & mold manufacturing, and machining of stainless steel, alloy steels and heat-resistant materials. MAIN TECHNICAL SPECIFICATIONS X-axis travel: 1,150 mm Y-axis travel: 1,000 mm Z-axis travel: 700 mm Rapid feed rates: X/Y – 60 m/min; Z – 40 m/min Milling spindle: 14,000 RPM, Capto C8 Spindle power: 74.6 kW (S1) / 85 kW (S6) Torque: 300 Nm (S1) / 450 Nm (S6) Retractable turning tool holder: 225 mm stroke Rotary table: 1,000 mm chuck diameter Maximum table load: 1,500 kg A-axis: -30° / +120° C-axis: Continuous rotation Tool magazine: 44 positions CNC control: Siemens SINUMERIK EXTENSIVE EQUIPMENT & ACCESSORIES INCLUDED Chi ...

boring mills and machining centers / Numerically Controlled Machining Centres
20.10.2026
approved
dealer
item-No.: 162738899
New in: 2023

used

check
Location: Land-de

Manufacturer: Brother Type: Speedio W-1000 XD1 Commissioning: 2024 Control type: CNC D00 and plain text dialog programming Axles: 4 X-travel: 100 mm Y-travel: 500 mm Z-travel: 480 mm + stand elevation 150 mm 4.Axis 360° Spindle speed: 16 -16000 rpm Spindle adapter cone: BBT-30 (BT-30) Tool stations: 21 (high-speed tool changer) Optional extras: Internal coolant supply 15 bar with self-cleaning pre-filter system Coolant tank 150 litres "Twin" chip disposal system for coarse and fine chips incl. filter system Automatic side door for robot loading Emulsion mist extraction for working area 700 m³/h CNC rotary table Brother T200 Ad.L clamped with counter bearing 2 x rotary union 4-flow Workpiece clamping hydraulic 80-210 bar Tool breakage monitoring Renishaw Laser Robot interface Part clamping control via differential pressure sensors (2-fo ...

boring mills and machining centers / Numerically Controlled Machining Centres
24.09.2026
approved
dealer
item-No.: 162742379
New in: 2016

used

check
Location: Land-de
Price: 59.500 €

General Manufacturer: Chiron Type: DZ 12 W Magnum high speed plus Control: Siemens 840D Year of Make: 2016 Travels: X 550 mm Y 400 mm Z 400 mm Rapid traverse X/Y/Z: 75 m/min Operating hours: 14,709 h Working spindle Speed: 20,000 rpm Torque: 29 Nm Power: 24 – 36 kW Tool holder: HSK 63A Double spindle spindle spacing: 250 mm Tool changing table Dimensions L/W: 660 x 950 mm Tool/movement Tool changer: 32-fold Dimensions and weight Weight: approx. 9,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Spindle coolers IKZ high-pressure system with belt filter Knoll KF150/500 Chip conveyor Probes Renishaw Oil mist extraction Blum Laser Measurement

boring mills and machining centers / Numerically Controlled Machining Centres
03.09.2025
approved
dealer
item-No.: 162738966
New in: 2001

used

check
Location: Land-de
Price: 15.000 €

Chiron FZ 18 W, NC machine: 5-axis machine Interference circle diameter [mm]: 630 with variaber Wz alternating plane Plate size: Workpiece changing device 0 / 180° weight-dependent, Self-regulating thanks to self-learning speed control Transport load per side Ø - max. 400Kg with stainless steel centre partition Clamping area 2 x 940 x 470mm² with threaded and fitting hole grid: M16x Ø 15H7x50mm Workpiece change time: approx. 3.7sec. weight-dependent, Self-regulating thanks to self-learning speed control Workbench: Two-axis NC rotary table Type ATU 200/AWU 160, Fabr. PEISELER Face plates Ø 180mm with centering hole A50 + Ø 012 Fixing pin Ø 16H7 and 4x M10 in bolt circle 104.8 Center height 174mm with horizontal axis of rotation Dimension to upper edge of face plate with vertical axis of rotation 263mm Sub-range 5, axis 360° continuous, 4th axis 0-90° S ...

boring mills and machining centers / Numerically Controlled Machining Centres
03.09.2025
approved
dealer
item-No.: 162738960
New in: 2007

used

check
Location: Land-de
Price: 10.000 €

Chiron FZ08K S Magnum Work table: length 770mm, width 290mm (clamping surface) Rigid table with chip tray for optimum chip fall during wet and dry machining. With raster drilling pattern: M16 x diameter 15 H7 x 50mm Rapid traverse: 75m/min in X, Y and Z axis Max. speed [rpm]: 3000 Dimensions/Weight: Length [m]: 2.308, Width [m]: 1.405, Height [m]: 2.447 Total weight [Kg]: 3400 Electronics: Control type: Siemens CNC control 840D (PCU 50 / NCU 572.3, 6 measuring circuits, 1 channel) incl. 10.4" TFT color screen/full keyboard OP010S Control Panel Logic Windows NT/XP Machine connection: Voltage [V]: 400 / 230 + 6% / -10% - 50Hz/N/Pe Frequency [Hz]: 50/60Hz Type of current: three-phase current Power: 14kVA

boring mills and machining centers / Numerically Controlled Machining Centres
03.09.2025
approved
dealer
item-No.: 162738969
New in: 2005

used

check
Location: Land-de
Price: 10.000 €

Chiron FZ08KS Magnum, NC machine: 3-axle Workbench: Length [mm]: 770, Width [mm]: 290 Table information: Rigid table with chip tray for optimal chip fall for wet and dry machining Clamping area: 770mm x 290mm with raster drilling pattern M16 x 15H7 x 50mm Table load: max. 500 kg Rapid traverse: X and Y axis 40m/min, Z axis 60m/min Max. speed [rpm]: 1500 Dimensions/Weight: Length [m]: 2,308, Width [m]: 1,405, Height [m]: 2,447 Total weight [Kg]: 3400 Electronics: Control Type: Siemens CNC Control 84OD PCU 50 / NCU 572.4, 6 measuring circuits, 1 channel incl. 10.4" TFT color screen / full keyboard OPO10S Windows NT Control Panel Logic NO RAM 256KB Machine connection: Voltage [V]: 400 / 230V t 107o - 50Hz/N/PE Frequency [Hz]: 50/60Hz Type of current: three-phase current Power: 13kVA Remark Accessories: Pressure monitoring of internal cooling

boring mills and machining centers / Numerically Controlled Machining Centres
20.10.2026
approved
dealer
item-No.: 162739782
New in: 1990

used

check
Location: Land-de

CHIRON FZ18 S CNC machining center with SK40 rotary table integrated as 4-axis in the control system Control: SIEMENS NUMERIK 810 Not in operation since 2016

boring mills and machining centers / Numerically Controlled Machining Centres
19.10.2026
item-No.: 162752355
New in: 2001

used

Location: Land-es
Price: 14.000 €

FEATURES: • Longitudinal travel 1020 mm • Cross travel Y 510 mm • Vertical travel Z 575 mm • SIEMENS CNC Type • Table length 1200 mm • Table width 500 mm • Max. Authorized weight 800 kg • Number of tools 30 • ISO 40 spindle taper • Max spindle speed 8000 rpm • Spindle motor power 15 kW • Length x width x height 3275 × 2948 × 2996 • Weight 7500 kg

boring mills and machining centers / Numerically Controlled Machining Centres
23.06.2025
item-No.: 162708443
New in: 2011

used

Price: 85.000 €

cycle time: sectotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

boring mills and machining centers / Numerically Controlled Machining Centres
28.10.2026
approved
dealer
item-No.: 162754707
New in: 2000

used

check
Location: Land-de

Refurbished by DMG in 2011 Control: HEIDENHAIN iTNC 530 Tool holder SK50 with tool storage for 60 tools Max. spindle speed: 8,000 1/min 30kW spindle with swivelling milling head (B-axis) Infrared probes NC rotary table with pallet change Total weight: 24,000 kg Table load: 2,000 kg

boring mills and machining centers / Numerically Controlled Machining Centres
29.10.2026
approved
dealer
item-No.: 162754811
New in: 2012

used

check
Location: Land-de

Commissioning 2013 with RS 3 rotary storage tank (3 pallets) Control: Heidenhain iTNC 530 HSCI Approx. 60 tools - SK40 IKZ (internal coolant supply) Total weight: 14,000 kg Spindle speed (max.): 18,000 rpm Number of slots in tool magazine: 60 Table load: 1,000 kg Heidenhain Infrared Probes Blum Laser Measurement 3D Quickset Air Cleaner electric handwheel

boring mills and machining centers / Numerically Controlled Machining Centres
30.10.2026
approved
dealer
item-No.: 162743264
New in: 2001

used

check
Location: Land-cz

The machine is in good technical condition, testing is possible after prior agreement. The tool magazine does not work, manual shifting is necessary, otherwise problem-free operation

boring mills and machining centers / Numerically Controlled Machining Centres
24.09.2026
approved
dealer
item-No.: 162750970
New in: 2024

used

check
Location: Land-de

CNC Universal Machining Center DECKEL MAHO DMU 95 monoBlock NEW DMG Design With track control Heidenhain TNC 640 Year of construction: 2024 Travel: X 950 Y 850 Z 650 Speed range: 0 – 20000 rpm infinitely variable (HSK 63) With the following accessories: NC swivel rotary table 1000 mm x 750 mm clamping surface 3 D Probe Heidenhain TS 460 Vertical tool changer with 120 magazine positions (HSK 63) Tool breakage detection Chip flushing in workroom door Chip rinsing gun with pump 1 bar/40 l min Blowing air d.d. spindle center Accuracy Package Application Tuning Cycle MPC Machine Protection Control Net Service App, Service Agent Operating mode 3 + 4 Electronic handwheel IKZ 40 bar with paper belt filter Chip conveyor Rotoclear Coolant Setup Spindle Oil Cooler Oil mist extraction 3-Piece Height Adjustable Machine Shoes Control cabinet cooling unit (Rittal) ...

boring mills and machining centers / Numerically Controlled Machining Centres
28.07.2026
approved
dealer
item-No.: 162749725
New in: 2004

used

check
Location: Land-de

Basic machine data Used 5-axis machining center from DMG Make: DMG Type: DMC 80 U hi-dyn Year of Make: 2004 Condition: very good Control: Name: Heidenhain MillPlus Travels: x-travel: 800 mm // y-travel: 700 mm // z-travel: 600 mm Technical data: • 2-fold pallet changer • Pallet size: 800 mm x 630 mm • 60-speed tool changer • Spindle 18,000 rpm • Tool holder SK 40 • Infrarottprobe • Rinsing gun • IKZ (internal coolant supply) • 600 litre tank with paper belt filter The machine is in very good condition. Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

boring mills and machining centers / Numerically Controlled Machining Centres
30.01.2025
item-No.: 162721379

used

Location: Land-de

Fully Functional CNC Milling Machine Machining Center Vertical DMG DMC 835 V Year of construction 2006 Control: SINUMERIK 840 D Powerline Spindle speed: 12,000 rpm Spindle motor: 14 kW X - Travel: 835 mm Y - Travel: 510 mm Z - Travel: 510 mm A-axis: available Rapid traverse: 30 m/min Tool holder: SK 40 Tool changing device: 30 Table load: 800 kg Clamping area: 1,000 x 560 mm Operating hours: 49,660 | 12,902 h (30.01.2025) Footprint of the machine: 2,100 x 2,700 mm Machine weight: approx. 4,200 kg Equipment SIEMENS 840D ShopMill Linear scales Electronic handwheel IKM – 25 bar / 30 l/min Conveyor Canopy Location of the machine: 76661 Philippsburg The machine can be viewed on site at any time. This is always desired. We would love to hear from you.

boring mills and machining centers / Numerically Controlled Machining Centres
22.10.2026
approved
dealer
item-No.: 162748957
New in: 2008

used

check
Location: Land-de

General Manufacturer: DMG Type: DMC 835V Year of Make: 2008 Control: Heidenhain 530i Travel: X 835 mm Y 510 mm Z 510 mm Operating hours: 24,283 h Spindle Speed: 10,000 rpm Tool holder: SK40 Tool Changer Number of stations: 30x Table Table size: 1,000 x 560 mm Table load: max. 800 kg Dimensions and weight Dimensions: 3,700 mm x 2,450 mm x 2,750 mm Weight: approx. 4,100 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Fourth axle Electric handwheel Chip conveyor

boring mills and machining centers / Numerically Controlled Machining Centres
05.10.2026
approved
dealer
item-No.: 162739613
New in: 2005

used

check
Location: Land-de

3D path control Heidenhain iTNC 530, main drive 19 KW (100% ED), 28 KW (40% ED), Tool holder SK 40, chain magazine with 60 places, chip conveyor, rotating viewing disc, Coolant tank with 600 liters, IKZ with 40 bar, switchable to blowing air, universal milling head B-axis, NC rotary table 900mm x 700 mm, infrared touch probe Heidenhain TS 641, electronic handwheel, Operating mode 4, documentation with repair work available. Spindle hours Total 13,700 of which 680 hours on new spindle replaced 27.02.2024

boring mills and machining centers / Numerically Controlled Machining Centres
04.08.2026
approved
dealer
item-No.: 162741374
New in: 2001

used

check
Location: Land-de

Specifications: Travel X/Y/Z: 600 / 600 / 700 mm Motor power: 15 kW (40% ED); 10 kW (100 & ED) Speed: 18,000 1/min Tool holder: SK 40 SK 40 magazine slots: 60 Equipment: - MillPlus IT 3D path control - Horizontal tool changing device Double gripper - Automatic swivel milling head - Rotating viewing panel - NC rotary table with pallet carrier - Rotary pallet changer - 2 pallets 630 x 500 mm - Universal milling head with controlled B-axis SK 40 (only in combination with motor spindle SK 40) - Tool holder for HSK-A63 according to DIN 69893 - Electronic handwheel - Mode 4: Advanced manual intervention - Flushing gun with pump - Tool breakage detection SK 40 mechanical design, range: 63...310 mm / +/- 3 mm - Interval switching chip conveyor - Internal coolant supply can be switched from 40 bar to 80 bar

boring mills and machining centers / Numerically Controlled Machining Centres
07.10.2026
approved
dealer
item-No.: 162753426
New in: 2014

used

check
Location: Land-de

Vertical High-Speed Machining Center Manufacturer: DMG Mori Type: MILL TAP 700 Year of Make: 2014 Control: Siemens 840D SL Travel paths X/Y/Z: 700 x 420 x 380 mm Spindle speed max.: 24,000 rpm Tool Magazine: 15 Slots Weight approx.: 4.100 kg Automation with robots Manufacturer: Sontec Type: Sonflex Year of manufacture: 2023 Robot Fanuc

boring mills and machining centers / Numerically Controlled Machining Centres
01.10.2026
item-No.: 162738314
New in: 1998

used

Location: Land-de

BAZ DMU 60E BJ 1998 3 axle

boring mills and machining centers / Numerically Controlled Machining Centres
05.04.2026
approved
dealer
item-No.: 162743151
New in: 2017

used

check
Location: Land-de

For sale Doosan 5-axis machining center type 850 LSR. equipped with a Fanuc control system, Key technical data (VCF 850LSR Travel (X/Y/Z): 3000 / 850 / 800 mm Table dimensions: 3500 x 870 mm Maximum table load: 3500 kg (incl. integrated turntable) Integrated rotary table (C-axis): Ø 800 mm B-axis (spindle inclination): 220° (+110° / -110°) Spindle speed: 12,000 rpm (standard) Spindle power: 18.5/22 kW (Fanuc) Spindle taper: BT40 (BIG-PLUS) Tool magazine: 60 stations (chain magazine) Rapid traverse (X/Y/Z): 40 m/min Machine weight: approx. 24,000 kg The machine is available from stock, subject to prior sale. For more information; Send an e-mail to chrismachinematch.nl

boring mills and machining centers / Numerically Controlled Machining Centres
30.10.2026
approved
dealer
item-No.: 162741267
New in: 2015

used

check
Location: Land-cz

The machine is in good technical condition, testing is possible by prior arrangement. control system: SINUMERIK 828D Movement in X/Y/Z axes: 1200 / 600 / 500 mm Distance between table and spindle end: 100 - 600 mm Number of axes: 3 Rapid traverse in X/Y/Z axes: 30 m/min Working feeds X/Y/Z: 0 - 15 m/min Clamping area: 1300 x 630 mm Maximum table load: 1500 kg Tool change Number of tool stations: 30 Maximum tool diameter: 80 mm Milling spindle Maximum speed: Mechanical spindle 10,000 rpm, motor spindle 15,000 rpm Maximum torque: mechanical spindle (S6) 100 Nm, motor spindle (S6) 100 Nm Dimensions (length x height x width): 3370 x 2950 x 3000 mm Machine weight: 12000 kg

boring mills and machining centers / Numerically Controlled Machining Centres
12.11.2025
approved
dealer
item-No.: 162740752
New in: 2008

used

check
Location: Land-de
Price: 18.490 €

Offered here is a machining center from the manufacturer Emco Famup with 4th axis with tailstock. The machine is freely loaded onto trucks. Make: Emco Famup Type: EmcoMill E900 Year of Make: 2008 Control: Siemens Sinumerik 810D - ShopMill Specifications: Travel distances X-Y-Z: 900x500x500 mm Rapid traverse X-Y-Z: 24 m/min A-axis travel range: 3600.001° Fpjc Ha Isxrvrdoh U Hop Table clamping surface: 1000x520 mm Max. workpiece weight: 800 kg Minimum distance between vertical spindle and table: 100 mm Maximum distance between vertical spindle and table: 600 mm Tool magazine: 30 positions Tool holder: ISO 40 DIN69871 Spindle speed: max. 12000 rpm Spindle power: 13 kW Coolant supply through the spindle: 15 bar (IKZ - CTS) Total weight: approx. 5 tons Dimensions: approx. 4000x2400x2900 mm

boring mills and machining centers / Numerically Controlled Machining Centres
04.10.2026
approved
dealer
item-No.: 162752285
New in: 2022

used

check
Location: Land-tr

Controlled Axes 4 axes (X, Y, Z, and electrospindle continuous rotation A-axis) Axis Strokes X-axis (Longitudinal): 7,700 mm Y-axis (Cross): 270 mm Z-axis (Vertical): 420 mm A-Axis Travel 0° to 180° continuous rotation (allows machining on 3 sides directly, up to 5 sides with angular units) Working Modes Single-piece (up to 7.7 m), multi-piece, and pendular/dynamic pendular (two independent work zones) Electrospindle Power 7.0 kW (S1 continuous duty) Spindle Speed Up to 16,500 RPM Tool Holder / Cone HSK-50F Tool Magazine 8-slot automatic tool changer mounted directly on the X-axis carriage Tool Compatibility Accommodates milling bits, 1 angular unit, and saw/disc blades up to Ø 180 mm

boring mills and machining centers / Numerically Controlled Machining Centres
18.08.2026
approved
dealer
item-No.: 162750727
New in: 2023

used

check
Location: Land-de
Price: 29.500 €

For sale; Etasis Etamill VL-1000 machining center in very good condition. Equipped with cooling by the spindle, The latest Fanuc control 0i Plus with Manual Guide i, chip conveyor, Renishaw TS27R, etc.

boring mills and machining centers / Numerically Controlled Machining Centres
09.11.2026
approved
dealer
item-No.: 162739913
New in: 2001

used

check
Location: Land-de

Works well.

boring mills and machining centers / Numerically Controlled Machining Centres
15.09.2026
approved
dealer
item-No.: 162752105
New in: 2014

used

check
Location: Land-de
Price: 36.000 €

A FANUC Robodrill α-D21LiA5 High Power vertical machining centre from 2014 is for sale. No repair machine – no known defects – ready for immediate use. The machine features the powerful FANUC Series 31i-B5 controller, a 21-fold tool changer, MAS BT30 tool holder and extensive equipment with a Renishaw touch probe and tool measurement. This machine also has a 100 mm stand raiser. The machine is ideal for the fast and precise machining of individual parts and series and is very productive, especially due to the high travel and feed speeds. Technical data Manufacturer: FANUC Model: Robodrill α-D21LiA5 Version: High Power Version Year of Make: 2014 Control: FANUC Series 31i-B5 Weight: approx. 2,200 kg Connected load: approx. 11 kVA Travels: X-axis: 700 mm Y-axis: 400 mm Z-axis: 330 mm Machine table: Table size: approx. 850 × 410 mm 3 T-slots ...

boring mills and machining centers / Numerically Controlled Machining Centres
06.10.2026
approved
dealer
item-No.: 162753378
New in: 2017

used

check
Location: Land-de

5-axis machining center Hedelius ACURA 65 incl. standby magazine Control: TNC 640 Year of Make: 2017 Internal machine no. 80 Travels: X-axis: 700 mm Y-axis H / V: 650 / 465 mm Z-axis: 600 mm Swivel table: Ø 650 x 540 mm Swivel range: +30° to -115° Table load: 500 kg Mount: DIN 69871 AD 40 Tool magazine: 65 – compartment Spindle speed: 50 - 14,000 rpm Accessories Standby magazine 180 seats Inclined bed coolant system SKM 900 Chip conveyor LTA Suction 3D Probe Rinsing gun KinematicOpt

boring mills and machining centers / Numerically Controlled Machining Centres
12.06.2026
approved
dealer
item-No.: 162746909
New in: 2005

used

check
Location: Land-de

CNC Machining Center Hedelius BC 100-2500 Control: Heidenhain iTNC 530 Year of Make: 2005 Internal machine no. 59 Travels: X-axis 2,500 mm Y-axis 1,000 mm Z-axis 770 mm Clamping area 3,220 x 1,000 mm Table load: approx. 3,000 kg Mount: SK 50 Tool magazine: 30 – compartment Spindle speed: 20 - 5,000 rpm Accessories - Coolant filter system 900 l - Internal cooling - Chip conveyors - Electronic handwheel - Partition wall for pendulum machining - Magnetic plate 2x 1,000 x 800 mm - Table switch TS27R - Prepared for touch probes

boring mills and machining centers / Numerically Controlled Machining Centres
25.04.2025
item-No.: 162713987
New in: 2006

used

Location: Land-de

CNC Machining Center Hedelius BC 100 P-3500 Magnum Control: Siemens Sinumerik 840D Travel: X-axis 3,500 mm Y-axis 1,000 mm Z-axis 770 mm Clamping area 4,150 x 1,000 mm T-slots 5 pieces Distance T-slots 200 mm Table height above floor: 730 mm Table load: approx. 4,000 kg Mount: DIN 69871 SK 50 Tool magazine: 50 – compartment Spindle speed: 20 - 4,500 rpm Accessories - Door automation - Handheld operator - Machine hood -Conveyor

boring mills and machining centers / Numerically Controlled Machining Centres
06.10.2026
approved
dealer
item-No.: 162753339
New in: 2009

used

check
Location: Land-de

CNC Machining Center Hedelius C 100 -3500 Magnum Control: Heidenhain iTNC 530 Year of Make: 2009 Internal machine no. 79 Travels: X-axis 3,500 mm Y-axis 1,000 mm Z-axis 770 mm Clamping area 4,150 x 1,000 mm Pendulum operation: 2 x 1,450 x 1,000 mm Table load: approx. 4,500 kg Mount: HSK 63 Tool magazine: 70 – compartment Spindle speed: 20 – 12,000 rpm Accessories - Handheld operator - Chip conveyors - Paper tape filter system - 20 bar coolant system

boring mills and machining centers / Numerically Controlled Machining Centres
28.09.2026
approved
dealer
item-No.: 162744534
New in: 2008

used

check
Location: Land-de

CNC Machining Center Hedelius C50-1800 Control: Heidenhain iTNC 530 Year of Make: 2008 Travels: X-axis 1,800 mm Y-axis 510 mm Z-axis 480 mm Clamping surface: 2x 1,000 x 510 mm Pendulum operation: 2 x 700 x 510 Mount: SK 40 Tool magazine: 20 times Spindle speed Celox spindle: 50 – 12,000 rpm Accessories - 3D Formingstar Pack - 3D Heidenhain touch probe - Chip conveyors - Partition wall - LTA suction - Water tank high-pressure pump 20 bar - Machine hood

boring mills and machining centers / Numerically Controlled Machining Centres
28.09.2026
approved
dealer
item-No.: 162743610
New in: 2009

used

check
Location: Land-de

CNC Machining Center Hedelius C60P-2000 Magnum Control: Heidenhain iTNC 530 Year of Make: 2009 Travels: X-axis 2,000 mm Y-axis 620 mm Z-axis 520 mm Clamping area 2,500 x 600 mm Mount: SK 40 Tool Magazine: 56 – Tray Spindle speed: 8,000 rpm Accessories: - Chip conveyor AME KB 448 - Paper belt filter AME PS 120 - LTA suction - Machine hood

boring mills and machining centers / Numerically Controlled Machining Centres
12.06.2026
approved
dealer
item-No.: 162742373
New in: 2012

used

check
Location: Land-de

CNC Machining Center Hedelius C 80-2300 Control: Heidenhain iTNC 530 Year of Make: 2012 Travels: X-axis 2,340 mm Y-axis 800 mm Z-axis 600 mm Clamping area: 2,900 x 750 mm Pendulum machining 2 x 945 x 800 mm Table load: approx. 2,800 kg Mount: SK 40 Tool magazine: 30 – compartment Spindle speed 30 - 8,000 rpm Accessories - Chip conveyors - Paper tape filter system - Handwheel HR410 - Machine hood - 2x LTA suction - Partition wall - Pickup magazine for angle heads

boring mills and machining centers / Numerically Controlled Machining Centres
09.09.2026
approved
dealer
item-No.: 162751757
New in: 2019

used

check
Location: Land-de

CNC Machining Center Hedelius Forte 65 Single 1320 Control: Heidenhain TNC 640 Year of Make: 2019 Availability: in stock Internal machine no. 74 Travels: X-axis 1,320 mm Y-axis 650 mm Z-axis 600 mm Total clamping area 1,500 x 650 mm Table load: approx. 1,200 kg Mount: HSK 63 Tool magazine: 65 compartment Spindle speed: 18,000 rpm Drive power: 35 kW Facilities - Inclined bed coolant system 900 l - IKZ 25 bar - Chip conveyors - 1x Rinsing gun - Electronic handwheel

boring mills and machining centers / Numerically Controlled Machining Centres
05.11.2026
approved
dealer
item-No.: 162751750
New in: 2020

used

check
Location: Land-de

CNC Machining Center Hedelius Forte 7-2600 Magnum Control: Heidenhain TNC 640 Year of Make: 2020 Availability: in stock Internal machine no. 73 Travels: X-axis 2,600 mm Y-axis 750 mm Z-axis 800 mm Pendulum operation: 2 x 1,000 mm Total clamping surface 2x 1,490 x 750 mm Table load: approx. 2,500 kg Mount: HSK 63 Tool magazine: 50 compartments Spindle speed: 50 - 18,000 rpm Drive power: 35 kW Facilities - Inclined bed coolant system 900 l - Chip conveyors - 2x dishwashing gun - Electronic handwheel - Partition wall prepared - High pressure pump 60bar - 0-point clamping platens - Vises and tools as required - Prepared for work space partition wall

boring mills and machining centers / Numerically Controlled Machining Centres
14.08.2026
approved
dealer
item-No.: 162747936
New in: 2006

used

check
Location: Land-de

CNC Machining Center Hedelius MC 40 -1800 Control: Heidenhain iTNC 530 Year of Make: 2006 Internal machine no. 63 Travels: X-axis 1,800 mm Y-axis 420 mm Z-axis 480 mm Clamping surface: 2 x 1,000 x 420 mm Mount: SK 40 Tool magazine: 20 times Accessories: - KM 350 high-pressure filter system with IKZ - Handwheel - Chip conveyors - Renishaw RMI prepared - Table switch Renishaw TS27R - Partition wall - Magnetic clamping plate

boring mills and machining centers / Numerically Controlled Machining Centres
18.09.2026
approved
dealer
item-No.: 162752253
New in: 2017

used

check
Location: Land-de

X-axis 1250/420 mm Y-axis 510/315 mm Z-axis 480 mm B-axis 220° C-axis 360° Drive power 19 kW Max. spindle speed 12000 rpm Tool holder SK40 33 tool positions

boring mills and machining centers / Numerically Controlled Machining Centres
25.04.2025
item-No.: 162731039
New in: 2004

used

Location: Land-de

Control: Heidenhain iTNC 530 Total travels X-axis 2,300 mm Y-axis 800 mm Z-axis 600 mm Fixed table working area: X-axis 925 mm Y/Z axis 800 / 600 mm Clamping area 1,400 x 750 mm Rotary table travels: X-axis 780 mm Y/Z axis 800 / 600 mm Clamping surface Ø 800 x 630 mm Mount: SK 40 Tool magazine: 30 compartment Spindle speed Kessler motor spindle: 50 – 12,000 rpm Accessories - Handheld operator - IKZ with screen filter system 500 liters -Conveyor - 6th axle prepared - Blum Laser - 2x suction - Machine hood

boring mills and machining centers / Numerically Controlled Machining Centres
06.10.2026
approved
dealer
item-No.: 162753332
New in: 2011

used

check
Location: Land-de

5-axis machining center Hedelius RS 805 K Control: Heidenhain iTNC 530 Year of Make: 2011 Internal machine no. 78 Travels: X-axis 1,500 mm Y-axis 800 mm Z-axis 600 mm Mount: SK 40 Tool magazine: 30 compartment Spindle speed: 12,000 rpm Accessories: - SKM 900 inclined bed coolant system - IKZ 25 bar - Chip conveyors - Handheld operator - Blow-off guns - Rinsing guns

boring mills and machining centers / Numerically Controlled Machining Centres
30.11.2025
item-No.: 162741263
New in: 2009

used

Location: Land-pl

Heller MC16 Nr31-43487 BJ. 2009 Spindle revolutions 1/min 45-16000 SK40 Travel ranges mm X 630 Y 630 Pobmlb Saowfd Eusljrd Z 630 Travel speed mm/min 1-40000 Number of tools 80 Tool mm 70/150 (for free secondary spaces) Tool length mm 320 Number of pallets 2 Pallet dimensions 400 x 500 Max. load pallet kg 500 B Axis NC Control system Sinumerik 840D Probe Heidenhain Yes Power kVA 60 Machine No. 63

boring mills and machining centers / Numerically Controlled Machining Centres
26.10.2026
approved
dealer
item-No.: 162754539
New in: 2009

used

check
Location: Land-de
Price: used machinery auction RESALE 8.000 €

with CNC control, Fabr. HEIDENHAIN, Type: ITNC 530, Travels: X-axis: 800 mm, Y-axis: 600 mm, Z-axis: 500 mm, with autom. Tool changer with 30 tool positions, with coolant device, chip conveyor, Fabr. KNOLL, Type: 340 K-1, Machine weight: 7000 kg

boring mills and machining centers / Numerically Controlled Machining Centres
05.10.2026
approved
dealer
item-No.: 162739623
New in: 2001

used

check
Location: Land-de

CNC control SEICOS (Sigma) 18M, speed range 120-12000 rpm, 22 / 18.5 KW Tool holder SK 40, tool magazine with 30 places, IKZ mt 15 bar, HSC machine package for precise milling at high feed speed Dimensions: Width x depth x height 2900 x 2400 x 2786 mm, weight approx. 8200 kg Please note: The machine is not usable, tool clamping of the SK 40 mount is defective. Tool changer can therefore not change.

boring mills and machining centers / Numerically Controlled Machining Centres
30.10.2026
approved
dealer
item-No.: 162743513
New in: 2017

used

check
Location: Land-cz

The machine is in good technical condition, testing is possible by prior arrangement.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE since 1996