One of the latest innovations by Baader for the fish industry. This machine is designed for filleting defrosted whitefish (with an average capacity of up to 40 filets per minute). Characterized by improved quality of smooth cutting even on soft fish (doesn't leave bloodstains or gaps on flesh). Easy to maintain at the production line, and easy to operate. Power: 4kW Voltage: 3x 400 V/ 50Hz Water consumption: 10L per/min Water pressure: 2,5 bar
This machine is designed for being directly attached to the herring filleting machines Baader 235 and 36. It receives the butterfly fillets, removes the dark fatty layer along the back, and skins them in a meat-saving manner, the silver film is retained on the fillet. The working range is from 19 to 42 cm in total length. Knife sets can be added to cut the fillets into pieces. Easily exchangeable rollers fitted with blades are available for pieces of 15, 20, 24, 26, 30, 33, 36, or 40mm. If the skinning machine is attached, the filleting machines keep on producing butterfly fillets, single fillets with skin as well as fried fish. This line can be completed with Baader 484, Baader 35 and a bulk feeder.
Baader 184 Filleting machine for whitefish Filleting machine for whitefish Condition: Overhauled This machine is designed for filleting gutted and headed cod, saithe, haddock from 30 to 70 cm in total length (=0,3 - 2,5 kg, h&g) or depending upon the type of fish, also less than 70 cm. Time-tested Baader filleting system with high yield and operational reliability. The Baader 184 is equipped with an integrated skinning unit. Capacity: 24-40 fish/min Power consumption: 10 kW Water consumption: 25 l/min Dimensions: 6,15 x 1,70 x 1,50 m Weight (net/gross): 2550/2850 kg
Baader 185 Filleting machine for whitefish Baader 185 provides filleting and skinning of a whitefish: big and medium cod, haddock, saith, merluza or the same fish. This machine is similar to the Baader 184. Its guidance assemblies and tools are, however, larger dimensioned. The working range of this machine is abt. 50 to 100 cm (=1 - 8,5 kg) for cod , abt. 50 to 90 cm (=1 - 6 kg) for saithe and abt. 50 to 80 cm (=1 -4,5 kg) for haddock, cm meaning the total length of the fish and gutted fish head on. Also can process de-headed fish: cod 40-80 cm (0.8-6.5 kg), saith 40-75 cm (0.8-5.0 kg) and haddok 40-65 cm (0.8-3.5 kg). Also with an integrated skinning unit the Baader 185 is highly efficient with optimal product quality and high yield. Completed with skinner Baader 51. Capacity: 24-32 fish/min Staff: 1 person Power consumption: 10 kW Water consumption: 28 l/min ...
Baader 166 Fish Gutting machine Small whitefish heading and gutting machine Condition: perfect This machine operates according to the same procedure as the Baader 162, however, within the range of smaller whitefish from 35 to 70 cm in total length (0,5 to 2 kg). When using both machines at the same time, total catches can be processed after rough grading since the working ranges of both machines overlap generously. Capacity: 25, 35 or 40 fish/min Power consumption: 2 kW Water consumption: 25 L/min Dimensions: 1,40 x 1,20 x 1,80 m Weight (net/gross): 650/920 kg The Baader 166 can be combined with the Baader 184
Product number: 2523UL Type: BA 603 Serial number: 120001290 Year of construction: 2013 Drums: 4 pcs. (1.3/1.3/2/5 mm) Power: 3 x 400V, 50Hz, 4.5kW Infeed height: 2250 mm Dimensions: 1600 x 2050 x 2650 mm With automatic infeed hopper Including pallet with parts/belts
Heading machine Baader 421 Condition: good Capacity: 28 fish per minute Water consumption: 12 l/min Staff: 1 person Dimensions (LxWxH): 1350x1000x1270 mm Weight: 660 kg
Baader 189 Filleting machine for cod and whitefish Condition: overhauled This machine processes cod, pollack, haddoch, hake employing well proved system with high fillet yield. Size range: fish from 40 to 85 cm (or 0,6 - 4,5 kg gutted fish with head) Capacity: 24-34 fish per minute Fish are loaded on to the machine after heading. The filleting tools adjust themselves to the different fish size within the operating range. For skinning the fillets have to be transferred manually to a skinning machine. Power consumption: 3 kW Water consumption: 15 liters per minute Dimensions (LxWxH): approx. 4000 x 1100 x 2400 mm Weight (net/gross): approx. 1060/1650 kg Can be combine with heading machine Baader 427 and skinning machine Bader 51 to compile a complete line.
Baader Filleting machine for whitefish Condition: overhauled Working range: whitefish from 35 to 70 см (=0,4-2,5 kg) Capacity: 27 fish/min Power consumption: 2,2 kW Water consumption: 20-25 l/min Dimensions: 3,80 x 0,95 x 1,60 m Weight (net/gross): 930/1564 kg
Baader 517 Filet Transfer Unit Condition: Good, working Designed for processing lines at fish factories (preferable to work with salmon and other salmon species) Working product range: 2-7 kg Capacity: up to 25 fish per minute
Baader 988 Trimming machine for salmon Condition: Good, working This is the high-speed trimming machine for salmon and trout. Make it possible to reduce manual work and increase quality and speed of cutting belly side, back side and surface of fillets. Due to advanced technology this unit calculates size and volume of every fish fillet before trimming. Average capacity: up to 50 fillets per minute. The optimal size of fish fillets for maximum product throughput and quality (LxW): up to 750 x 250 mm. Data of cutting stored in PC and parameters of trimming could be archived. Equipped with Baader 1517 Filet Transfer Unit.
Hole drum 6 mm (drum 3 mm soft) for de-stretching machine Baader 697. New and unused, ready to ship immediately.
Spare parts for raw material shredder Baader 152 (Raw Material Crusher Baader 152). Almost all spare parts are available in stock or at short notice. Alternatively, a new machine can be offered. Please contact us.
Spare parts for smooth cutting head board Baader 424 / 429 (Straight Cut Heading Machine Baader 424 / 429). Almost all spare parts are available in stock or at short notice.
Baader 142 - The Ripper Machine for vacuum evisceration of salmon, trout Released: 1998, 1999 Condition: excellent This Baader 142 machine is designed to eviscerating salmon, trout weighing from 1.3 kg to 11 kg (head or without). The fish being processed is loaded into the machine by hand. A strong clip captures the carcass from the tail for further transportation. The fish is then measured using electronic sensors to help determine the location of the cut. The cutting mechanism is controlled by sensors and the computer, it produces a careful, symmetrical cut, which does not affect the insides. The insides are removed by means of a vacuum device. Processed fish weighing from 1.3 to 11 kg Performance: 16 fish/min Vacuum pumps and waste tanks included
Condition: Excellent The machine is designed for decapitation in continuous mode of cod fish, and can also beused for beheading perch. Size range: fish with a total length of 30-70 cm Performance: Up to 40 fish per minute. Power consumption: 1.87 kW Water consumption: 5 litres per minute. Belt width: 150 mm Divider height: 80 mm Height: 1450 mm Dimensions (DxXV): approximately 2160 x 885 x 1860 mm
Baader 201 Violet Machine Violet machine for large cod and red fish Released: 1997-1998 Condition: excellent The machine is designed to produce standard fillets from gutted and decapitated large fish without shoulder bones. Processed cod, salmon, tuna. Equipped with a functional device for laying fish, large knives scraping rib bones, as well as guides, providing a high output of evenly cut fillets. Due to its compactness, the Baader 201 can be mounted on ships. It is possible to connect the skin-removal machine. Performance: 10, 18 or 20 fish/min clocked Working range: Atlantic cod - 50-120 cm (max. 13 kg); Cod Pacific - 54-108 cm (max. 13 kg); side - 60-120 cm (max. 12 kg), salmon - max. 9 kg, tuna - 4.5 - 9 kg. Power consumption: 4.5 kW Water consumption: 16 litres/min Dimensions: 4.70 x 1.67 x 1.45 m Mass (net/gross): 1800/2230 kg
Condition: Good, working The Baader 51 skin-removal machine is designed to remove skins from the fillets of cod fish, heke, paltsus and red fish. The machine captures the skin from the tip of the tail without any incision. This provides a higher output of finished products. The width of the pipeline: 380 mm. The fillets are placed on a conveyor belt next to each other. Performance: 50-160 fillets per minute (depending on fillet size and operator skills) Power consumption: 1.5 kW Water consumption: 15 litres per minute The width of the work pipeline: 380 mm Dimensions: 1980 x 780 x 1130 mm Weight (net): 530 kg
Man. year: 1990 Condition: overhauled The Baader 51 is a skinning machine for fillets cut from white fish, blue whiting, halibut and red fish. This machine seizes the skin without initial cut from the tail end, right where the skin begins. This results in a higher yield. Usable width of feed belt: 380 mm The fillets can be placed on the belt optionally side by side. Capacity: 50-160 fillet/min (depends on the fillet size and operator's skill) Power consumprion: 1,5 kW Water consumption: 15 L/min Dimensions: 1980 x 780 x 1130 mm Weight (net): 530 kg
Filleting machine for small whitefish Condition: good Working range: small witefish from 30 to 55 cm Capacity: 25-40 fish/min Power consumption: 1,5 kW Water consumption: 15 l/min Dimensions: 3,25 x 1,20 x 1,70 m Weight (net): 810 kg
Baader 200 Filleting machine for salmon species Machine for producing fillet of salmon, trout and the same fish species. It processes gutted and headed fish with or without collar bone. The fish is feed through the tools in such manner that the fillets does not get any stress - it is a prerequisite for a smooth surface of the cut. The salmon version produces both fillets with and without collar bone, and after adaptation, salmon sides on which the rib bones are retained. Capacity: 15-35 fish/min Working range: from 1,5 to 5,5 kg (gutted and headed fish) Power consumption: 5 kW Water consumption: 9 l/min Dimensions: 4,30 x 1,75 x 1,50 m Weight (net/gross): 1800/2230 kg
Height=3.25 m, Overall length= 1.68 m, Overall width= 3.7 m, Net weight= 2400 kg,
Height=1.55 m, Overall length= 1.15 m, Overall width= 1.3 m, Net weight= 680 kg,
Height=1.27 m, Overall length= 0.5 m, Overall width= 0.85 m, Net weight= 372 kg,
Height=1.25 m, Overall length= 0.45 m, Overall width= 0.86 m, Net weight= 345 kg,
Height=1.27 m, Overall length= 0.5 m, Overall width= 0.85 m, Net weight= 355 kg,
Height=1.26 m, Overall length= 0.55 m, Overall width= 0.75 m, Net weight= 230 kg,
Height=1.65 m, Overall length= 1.1 m, Overall width= 1.4 m, Net weight= 270 kg,
