382 offers

Your found location: Latitude 0.0 + Longitude 0.0
Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:
injection moulding machines / Injection molding machines
27.09.2026
approved
dealer
item-No.: 162752809

used

check
Location: Land-fr

injection moulding machines / Injection molding machines
05.05.2026
item-No.: 162746566
New in: 2003

used

Location: Land-fr

SANDRETTO 485 T Series 9 Reference: 2650/4850 Year: 2003 Clamping force: 485 T / 4850 kN Distance between tie bar: 740 x 740 mm Platen dimensions: 1120 x 1120 mm Mold thickness (Min/Max) : 250-850 mm Opening stroke: 830 mm Injection volume: 1768 cm³ Injection pressure: 1500 bar Injection screw diameter: 80 mm L/D ratio: 20 Options: 4 hydraulic cores 1 air blow gun 2 8-way water boxes Dimensions: 8.71 x 2.65 x 2.14 m Weight: 21,500 kg

injection moulding machines / Injection molding machines
05.05.2026
item-No.: 162746565
New in: 2005

used

Location: Land-fr

SANDRETTO SERIE 9 - 300 T Year : 2005

injection moulding machines / Injection molding machines
05.05.2026
item-No.: 162746564
New in: 2001

used

Location: Land-fr

SANDRETTO Serie 9 860/2300 Clamping Force: 230 T - 2300 kN Year : 2001 Distance Between tie bar: 585 x 585 mm Platen Dimensions: 860 x 860 mm Mold Thickness (Min/Max): 210 - 630 mm Opening Stroke: 580 mm Injection Volume: 475 cm³ Material Pressure: 1876 bar Screw Diameter: 50 mm Total Machine Power: 44.2 kW L/D Ratio: 20 Robot Interface: Euromap 12 Weight: 10,500 kg Dimensions: 6.25 x 2.28 x 2.1 m SEF 2000

injection moulding machines / Injection molding machines
04.11.2026
approved
dealer
item-No.: 162755105

used

check
Location: Land-fr
Price: 22.500 €

SANDRETTO 485 T Series 9 Reference: 2650/4850 Year: 2003 Condition: Very good Technical Specifications: Clamping force: 485 T / 4850 KN Tie bar spacing: 740 x 740 mm Platen dimensions: 1120 x 1120 mm Mold thickness (Min/Max): 250-850 mm Opening stroke: 830 mm Injection volume: 1768 cm³ Injection pressure: 1500 bar Screw diameter: 80 mm L/D ratio: 20 Additional Features: 4 hydraulic cores 1 air valve 2 junction boxes with 8 channels each Power panel: Rear: 4 three-phase sockets, 1 neutral, 1 ground Front: 1 three-phase socket, 1 neutral, 1 ground Dimensions & Weight: Weight: 21,500 kg Overall dimensions (L x W x H): 8.71 x 2.65 x 2.14 m

injection moulding machines / Injection molding machines
27.09.2026
approved
dealer
item-No.: 162738076

used

check
Location: Land-fr

injection moulding machines / Injection molding machines
27.09.2026
approved
dealer
item-No.: 162743400

used

check
Location: Land-fr

injection moulding machines / Injection molding machines
07.07.2026
approved
dealer
item-No.: 162737756

used

check
Location: Land-fr

SANDRETTO series 9 860/2200 Clamping force: 220 T - 2200 KN Distance between tie bar : 510 X 510 mm Platen dimension: 770 X 770 mm Min / max mold thickness: 210 - 630 mm Opening stroke: 550 mm Injectable volume: 475 cm3 Injection pressure: 1815 bars Screw diameter: 50 mm New screw / sheath injection assembly Total machine power: 43.1 KW L/D ratio: 20 Euromap 12 robot interface (Dal maschio Ginko from 2004 possible option) 2 aux cores (PM and PF) Top dosage

injection moulding machines / Injection molding machines
10.09.2026
approved
dealer
item-No.: 162742796
New in: 1999

used

check
Location: Land-fr

Screw diameter: 120 mm Injectable volume / Shot volume: 5598 cm3 Injection pressure : 1137 bar Column passage / Bettween tie bar: 1060 x 1060 mm Mould thickness mini-maxi / Mould tickness mini-max: 350 - 1100 mm Opening stroke: 1150 mm Euromap 12 4 Hydraulic Cores / 4 Corepulling

injection moulding machines / Injection molding machines
29.10.2026
approved
dealer
item-No.: 162745908
New in: 2003

used

check TOP SELLER
Location: Land-fr

Screw diameter: 93 mm Injectable volume / Shot volume: 3138 cm3 Injection pressure : 1912 bar Column passage / Bettween tie bar: 950 x 850 mm Mold Thickness /Tickness tie bar: 300-1000 mm Opening stroke: 930 mm Ejection stroke: 350 mm 2 cores / 2 corepulling 2 blow guns / 2 air valves Robot interface

injection moulding machines / Injection molding machines
19.10.2026
approved
dealer
item-No.: 162754065
New in: 1998

used

check
Location: Land-uk

B&A REF:  9362 TON: 440 SCREW DIAMETER:  80MM SHOT WEIGHT: 1895 STROKE VOLUME:  2060CM3 INJECTION PRESSURE:  1540AR PLATEN SIZES:  1120 X 1120MM DBTB: 740 X 740MM MIN MOULD HEIGHT:  250MM MAX MOULD HEIGHT: 850MM MOULD OPENING STROKE:  830MM MAX DAYLIGHT:  1680MM EJECTOR STROKE:  305MM CONTROLS: SEF 100 CORE PULLING: 2 AIR VALVES: 2 MOTOR:  55 HEATING CAPACITY: 33KW ROBOT INTERFACE: EUROMAP SCREW DRIVE:   HYDRAULIC

injection moulding machines / Injection molding machines
11.11.2026
approved
dealer
item-No.: 162755691
New in: 1998

used

check TOP SELLER
Location: Land-uk

B&A REF:  9362 TON: 440 SCREW DIAMETER:  80MM SHOT WEIGHT: 1895 STROKE VOLUME:  2060CM3 INJECTION PRESSURE:  1540AR PLATEN SIZES:  1120 X 1120MM DBTB: 740 X 740MM MIN MOULD HEIGHT:  250MM MAX MOULD HEIGHT: 850MM MOULD OPENING STROKE:  830MM MAX DAYLIGHT:  1680MM EJECTOR STROKE:  305MM CONTROLS: SEF 100 CORE PULLING: 2 AIR VALVES: 2 MOTOR:  55 HEATING CAPACITY: 33KW ROBOT INTERFACE: EUROMAP SCREW DRIVE:   HYDRAULIC

injection moulding machines / Injection molding machines
01.10.2026
item-No.: 162751522
New in: 2012

used

Location: Land-de

machine number type model year clampingforce distance between openingstroke screw shotvolume tiebars diameter ton mm mm mm cm3 1 2000-1450 S+ 2011 200 530x530 550 62 845 E-screwdrive 2 2000-850 S+ 2012 200 530x530 550 52 499 E-screwdrive 3 2000-850 S+ 2012 200 530x530 550 45 374 E-screwdrive 4 2500-850 S+ 2006 250 585x585 575 45 374 E-screwdrive 5 2500-1450 S+ 2009 250 585x585 575 62 845 E-screwdrive 6 3300-2150R S+ 2010 330 630x630 620 62 513 E-screwdrive 7 3300-5650 SXS 2006 330 630x630 620 84 1247 E-screwdrive 8 4400-3550 S+ 2010 440 730x730 720 72 1547 E-screwdrive 9 4400-3550 S+ 2010 440 730x730 720 72 1547 E-screwdrive 10 4400-5650R-2K SXS 2007 440 845x845 850 84 1247 E-screwdrive 11 4400-5650R-2K SXS 2007 440 845x845 850 84 1247 E-screwdrive 12 4400-5650R S+ 2008 440 730x730 720 84 1247 E-screwdrive 13 4400-5650 S+ 2009 440 730x730 720 84 249 ...

injection moulding machines / Injection molding machines
09.11.2026
approved
dealer
item-No.: 162739918
New in: 2005

used

check
Location: Land-de

Injection moulding machine Stork N-2500-1400 Injection unit: Spray pressure (max.) 2100 bar Spray volume (max.) 595 cc Injection weight hp (max.) 565 g Spraying speed (max) 299 cc/s Nozzle (immersion depth) Clamping unit: Clamping force 250 tons Locking force 275 tons Size of the clamping plate (hor. + vert.) 920 X 920 Opening stroke (max.) 575 mm Max. tool weight Tool height (min./max.) 200-685 Clear width between the bars 585-585 mm Discharge stroke (max.) 175 mm Ejector diameter max.80 mm Centering ring (DS-AWS) 160 mm Max. clear width between clamping p. O ...

injection moulding machines / Injection molding machines
15.10.2026
approved
dealer
item-No.: 162741584
New in: 2008

used

check
Location: Land-fr
Price: 10.000 €

Plastic injection molding machine SUMITOMO DEMAG C75 – Year 2008 Sumitomo Demag C75 model, year 2008.

injection moulding machines / Injection molding machines
25.09.2026
approved
dealer
item-No.: 162752665
New in: 2013

used

check
Location: Land-pl

Sumitomo Demag Systec 100/420-310 with the Sepro SR SDR11 S3 TRANS robot / hybrid machine Year of Make: 2013 Injection unit: Screw diameter: 35 mm Injection weight: 149 g Spray pressure: 2024 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 100 t Spar spacing: 420x420 mm Size of the clamping plates: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air Valve x 2 Hydraulic core pull x 1 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Built-in printer Machine has been regularly serviced by the authorized service Sumitomo Demag Robot Sepro SR SDR11 S3 TRANS Year of Make: 2013 5-axis robot: 3 axes are driven by servo motors  ...

injection moulding machines / Injection molding machines
25.09.2026
approved
dealer
item-No.: 162752667
New in: 2014

used

check
Location: Land-pl

Sumitomo Demag Systec 210/580-430 with the Sepro Success 22 robot / hybrid machine Year of Make: 2014 Injection unit: Screw diameter: 35 mm Injection weight: 153 g Spray pressure: 2640 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 210 t Handlebar spacing: 580x580 mm Size of the clamping plates: 860x860 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Very good technical condition Hybrid machine: high-speed, energy-saving and quiet Operating hours: approx. 30,000 h in automatic mode Euromap 67 Robot interface Air Valve x 9 Hydraulic, needle-core pull, controlled by a proportional valve x 1 Hydraulic core pull x 4 Air Core Pull x 5 Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional valve on the injection un ...

injection moulding machines / Injection molding machines
25.09.2026
approved
dealer
item-No.: 162752669
New in: 2012

used

check
Location: Land-pl

Sumitomo Demag Systec 350/720-2300 / Production line with the Wittmann-Demag DR833 robot Year of Make: 2012 Injection unit: Screw diameter: 70 mm Injection weight: 1103 g Spray pressure: 1877 bar Dosing volume: 1212 ccm Clamping unit: Clamping force: 350 t Tiebar spacing: 720x720 mm Size of the clamping plates: 1040x1060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull controlled with proportional valve x 1 Control with hot runners x 5 Hardened injection unit - Bimetal Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable power Built-in printer Machine has been regularly serviced by the authorized service Sumitomo Demag Robot Wittmann-Demag DR833 Year of Make: 2011 4- ...

injection moulding machines / Injection molding machines
25.09.2026
approved
dealer
item-No.: 162752772
New in: 2015

used

check
Location: Land-pl

Sumitomo Demag Systec 80/420-310 with the Wittmann W818 robot Year of Make: 2015 Injection unit: Screw diameter: 30 mm Injection weight: 103 g Spray pressure: 2755 bar Dosing volume: 115 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC5 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 2 Control with hot runners x 12 Hardened injection unit - Bimetal Parallel movements Built-in printer Robot Wittmann W818 Year of Make: 2013 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Traversing in axes: X-420, Y-1000, Z-1500 Touch control panel The safety package for robots Robot with adapter Purchase of the robot at an additional cost Dimensions: Weight: 4000 kg Length/Width/Height: 4.10x ...

injection moulding machines / Injection molding machines
12.11.2026
approved
dealer
item-No.: 162755417
New in: 2019

used

check
Location: Land-cz

Manufacturer: TEDERIC Model: D 800/i7500 (900) Year: 2019 Condition: Used Stock number: 9666 Clamping force: 9000 kN Screw diameter: 100 mm Injection capacity: 4050 cc Machine length: 11340 mm Machine width: 2440 mm Machine height: 2450 mm Injection weight: 42000 kg The offer includes: PROTECH PTC 50 Cooling Unit TEMPER SPTCV-9 Temperature Controller SHINI SDDU 160H Drying Device SHINI 3660 Plastic Shredder

injection moulding machines / Injection molding machines
14.03.2025
item-No.: 162718621
New in: 2015

used

Location: Land-es

Clamping Force: 600 ton // Shot Weight (Max): 12305 g

injection moulding machines / Injection molding machines
07.05.2026
item-No.: 162746712
New in: 2020

used

Location: Land-fr

Year: 2020 Operating hours: 8,000h Reference : DE388-E1700C Screw diameter: 65 mm L/D ratio: 20 Injectable volume: 929 cm3 Injectable weight in PS: 846 g Injection pressure: 1890 bar Screw rotation speed: 250 rpm Injection speed: 160 mm/s Total power: 89 kW Distance between tie bar: 750 x 750 mm Mold thickness: 280-750 mm Closing stroke: 650 mm Platen dimensions: 1100 x 1060 mm Machine weight: 18 T 4 hydraulic cores 3 blow guns EUROMAP 67

injection moulding machines / Injection molding machines
07.05.2026
item-No.: 162746713
New in: 2021

used

Location: Land-fr

Year: 2021 Working hours : 250h Reference DE478-E2300C Screw diameter: 70 mm L/D ratio: 20 Injectable volume: 1251 cm3 Injectable weight in PS: 1138 g Injection pressure: 1890 bar Screw rotation speed: 220 rpm Injection speed: 160 mm/s Heating power: 33 kW Distance between tie bar: 850 x 800 mm Mold thickness: 320-800 mm Closing stroke: 710 mm Platen dimensions: 1270 x 1220 mm 4 hydraulic cores 3 blow guns EUROMAP 67

injection moulding machines / Injection molding machines
20.06.2025
item-No.: 162713812
New in: 2008

used

Location: Land-cz

Inv. Num. : 8355 Type: TRX 100V Producer: TEDERIC Created: 2008 Parameters: Clamping force: 100 t Injection capacity: 228 cc Injection mass: 208 g Height of the clamping plate: 550 mm Width of the clamping plate: 540 mm Distance between uprights (horizontal): 360 mm Distance between uprights (vertical): 360 mm Ejector stroke length: 100 mm Spindle power: 11 kW Machine length: 4100 mm Machine width: 1100 mm Machine height: 1800 mm Injection weight: 3500 kg

injection moulding machines / Injection molding machines
12.11.2026
approved
dealer
item-No.: 162752513
New in: 2020

used

check
Location: Land-cz

Manufacturer: VSP Model: BLAZE 180 Pro Year: 2020 Condition: Used Stock No: 9538 Switch-on hours: 40336 h Hours: 25284 h Clamping force: 180 t Screw diameter: 45 mm Injection capacity: 366 cc Injection mass: 337 g Injection Molding Stroke: 450 mm Distance between uprights (horizontal): 520 mm Distance between uprights (vertical): 470 mm Ejector stroke length: 150 mm Mold height: 180-540 mm Machine length: 5100 mm Machine width: 1400 mm Machine height: 1900 mm

injection moulding machines / Injection molding machines
08.09.2026
approved
dealer
item-No.: 162741405
New in: 2014

used

check
Location: Land-de

warehouse no.: 503665 manufacturer: Wittmann Battenfeld type: EcoPower 110-350 controller: UNILOG B6P year of construction: 2014 operation hours: 56851 h clamping force: 1100 kN distance between tie-bars h x v: 470 x 420 mm size of mould plates h x v: 680 x 663 mm min. mould height: 200 mm max. mould height: 450 mm max. open daylight: 830 mm opening stroke: 380 mm screw diameter: 25 mm swept volume: 86 ccm injection pressure: 3000 bar equipment included screen text german Screentext Multi-Language CEE-socket 16A machine incl. water flow regulator Anti vibration mounts measures of machine l x w x h: 4.57m x 1.5m x 2.13m total weight: 4800KG

injection moulding machines / Injection molding machines
25.09.2026
approved
dealer
item-No.: 162752661
New in: 2019

used

check
Location: Land-pl

Wittmann Battenfeld EcoPower 110/350 / Electric motor / Operating hours: approx. 15,000 in automatic mode Year of Make: 2019 Injection unit: Screw diameter: 35 mm Injection weight: 153.8 g Spray pressure: 2083 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 110 t Handlebar spacing: 470x420 mm Size of the clamping plates: 682x682 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B8 - Touch Screen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 15,000 in automatic mode Total number of operating hours: 21,800 Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Central lubrication Dimensions: Weight: 4800 kg Length/Width/Height: 4.91x1.42x2.10  ...

injection moulding machines / Injection molding machines
25.09.2026
approved
dealer
item-No.: 162752658
New in: 2014

used

check
Location: Land-pl

Wittmann Battenfeld HM 150/750 Servo Power / Hybrid Machine / Operating Hours: approx. 29,000 in automatic mode Year of Make: 2014 Injection unit: Screw diameter: 50 mm Injection weight: 402.2 g Spray pressure: 1714 bar Dosing volume: 442 cc Clamping unit: Clamping force: 150 t Tiebar spacing: 520x470 mm Size of the clamping plates: 760x755 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6P - Touch Screen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 29,000 in automatic mode Total number of operating hours: 36,714 Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Servo motor driven by inverter - Energy saving Dimensions: Weight: 6600 kg Length ...

injection moulding machines / Injection molding machines
25.09.2026
approved
dealer
item-No.: 162752659
New in: 2015

used

check
Location: Land-pl

VM Wittmann Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Moulding Machine with the Rotary Moulding Machine Year of Make: 2015 Injection unit: Screw diameter: 35 mm Injection weight: 175.6 g Spray pressure: 2743 bar Dosing volume: 193 cc Clamping unit: Clamping force: 150 t Spar spacing: 0x0 mm Size of the clamping plates: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 Additional equipment: Vertical Injection Molding Machine with the Rotary Molding Machine Hybrid machine: high-speed, energy-saving and very quiet Air Valve x 5 Hydraulic core pull x 1 Control with hot runners x 12 Injection unit is wear-resistant and resistant to corrosion Rotary table diameter: 1500 mm Rotary table driven by a servo motor, controlled by an inverter Dimensions: Weight: 11300 kg Length/Width/Height: 3.83x1.50x4.07 m All offered ...

injection moulding machines / Injection molding machines
10.11.2026
approved
dealer
item-No.: 162755587
New in: 2021

used

check
Location: Land-de

warehouse no.: 503724 manufacturer: Wittmann Battenfeld type: Vpower 120-350 R1300 controller: Unilog B8 year of construction: 2021 clamping force: 1200 kN distance between tie-bars h x v: 1160 x mm size of mould plates h x v: 740 x 580 mm min. mould height: 250 mm max. open daylight: 600 mm opening stroke: 350 mm round table diameter: 1300 mm screw diameter: 30 mm swept volume: 106 ccm injection pressure: 2835 bar An additional plasticizing unit is also available with the following technical specifications: Screw diameter: 18 mm Stroke volume: 22.9 ccm Specific injection pressure: 3000 bar measures of machine l x w x h: 4.4m x 2.09m x 3.8m total weight: 10000KG equipment included screen text german core pulling pneum. 2 x injection unit extremely wear resistant and corrosion resistant interface EUROMAP 63 interface OPC

injection moulding machines / Injection molding machines
21.08.2026
approved
dealer
item-No.: 162750778
New in: 2020

used

check
Location: Land-uk

B&A REF: WITTMANN BATTENFELD SmartPower TON: 300 SCREW DIAMETER: 65MM SHOT WEIGHT: 991 STROKE VOLUME: 1078CM3 INJECTION PRESSURE: 2070AR PLATEN SIZES: 1130 X 1155MM DBTB: 800 X 720MM MIN MOULD HEIGHT: 400MM MAX MOULD HEIGHT: 850MM MOULD OPENING STROKE: 850MM MAX DAYLIGHT: 1250MM EJECTOR STROKE: 300MM CONTROLS: UNILOG B8 CORE PULLING: 2 AIR VALVES: 6 MOTOR: SERVO HYDRAULIC HEATING CAPACITY: 24.5KW ROBOT: WITTMANN WX 152 SERVO SCREW DRIVE: HYDRAULIC HOT RUNNER: 8 ZONE

injection moulding machines / Injection molding machines
12.11.2026
approved
dealer
item-No.: 162749592
New in: 2016

used

check
Location: Land-cz

Manufacturer: Woojin Selex Model: TH 350S Condition: Used Stock number: 9348 Hours: 62800 h Clamping force: 350 t Screw diameter: 65 mm Injection capacity: 863 cc Injection speed: 102 mm/s Equipment: Robotic arm GIGA-10/20

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE since 1996