We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Manufacturer:
(Category: 101-7)
used
The machine is in good technical condition, after prior agreement it is possible to test it. Including complete renishaw probe and 4 full cnc axes kitagawa. Possibility to sell also clamps, vices, lang system.
used
The machine is in good technical condition, testing is possible by prior arrangement.
used
Travel (X / Y / Z) 1,524 mm / 660 mm / 610 mm Table size 1,676 × 660 mm Table load Up to 2,000 kg Spindle holder SK50 DIN 69871 Speed range up to 8,000 rpm Spindle power 22 kW continuous power (30 min. to 26 kW) Coolant by spindle Number of seats standard: 30 Iiebtfbewt N Nhj Tpmsc Tool weight max. 15 kg Tool length max. 300 mm Tool diameter max. 125 mm (if the adjacent space is empty), otherwise 75 mm Rapid traverses (X/Y/Z) 30 / 30 / 24 m/min Machine weight approx. 10,000 Control Hurco WinMax / Ultimax Installation area (L×W×H) approx. 5,600 × 3,900 × 3,300 mm
used
used
used
CNC Machining Center Kunzmann WF 600 CNC Control: Heidenhain TNC 640 Year of Make: 2015 Internal machine number: 76 Travels: X-axis 600 mm Y-axis 400 mm Z-Axis 400 mm Z-Axis 400 mm Mount: SK 40 DIN69871 Speed: 1 - 5,000 rpm
used
CNC Machining Center Kunzmann WF 650 Control: Heidenhain iTNC 640 Year of Make: 2015 Internal Machine No: 67 Travels: X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Rotary table C-axis: Ø 400 mm Swivel range A-axis: +120/-95° C-axis rotation range: 360° Mount: SK 40 DIN69871 Tool magazine: 40-fold Spindle speed: 1 – 12,000 rpm Spindle swivel range: +5 / -92° - Coolant system - IKZ - Electronic handwheel HR 510 FS - Chip auger
used
Two-spindle CNC machining center MAG SPECHT 450 DUO for precise and highly productive series machining of metal components. Manufacturer: MAG IAS GmbH Model: SPECHT 450 DUO Machine ID: AF210.9 Year of Make: 2016 Machine Type: CNC Twin Spindle Machining Center Number of work spindles: 2 CNC control: Siemens SINUMERIK X-axis travel: 510 mm Y-axis travel: 600 mm Travel Z-axis: 660 / 700 mm (depending on axle version) Spindle spacing: 540 mm Max. axis speed: 70 m/min Final Drive: Ball Screw Connection voltage: 400 V, 3~, 50 Hz Control voltage: 24 V DC Valve voltage: 24 V DC Nominal electrical power: 50 kW Total rated current: 70 A Max. pre-fuse: 100 A Equipment: - Siemens SINUMERIK CNC control with control panel - Separate magazine control panel - Tool magazine - Closed processing room with protective doors - Lubrication an ...
used
CNC-controlled double-spindle machining center MAG SPECHT 450 DUO for industrial metalworking. Manufacturer: MAG IAS GmbH Model: SPECHT 450 DUO Machine type: ZKG EA288 13 AF230.1 Year of Make: 2014 Machine number: X01123971 Control: Siemens SINUMERIK Machine version: Double-spindle machining center Connection voltage: 400 V / 3 phases / 50 Hz Control voltage: 24 V DC Valve voltage: 24 V DC Nominal power: 50 kW Total rated current: 70 A Protection of the supply line: max. 100 A Electrical power measurement: Siemens SENTRON PAC4200 Equipment: Hydraulic system with pressure accumulator, machine cooling, protective housing and operating platform
used
CNC-controlled horizontal machining center with two work spindles for industrial series machining of workpieces. Manufacturer: MAG IAS GmbH Model: SPECHT 500 DUO Machine Type: CNC Double Spindle Horizontal Machining Center System identification: AF250.1 Year of Make: 2014 Control: Siemens SINUMERIK Number of work spindles: 2 Processing: Horizontal Tool change system: Automatic, typical of the model Machine Enclosure: Available Operation: Central CNC control panel Drive technology: Separate drive control cabinet Control technology: Separate control cabinet Media supply: Pipeline connections with pressure gauges Connection voltage: 400 V, 3 phases Frequency: 50 Hz Control voltage: 24 V DC Valve voltage: 24 V DC Nominal power according to nameplate: 45 kW Total rated current: 65 A Maximum pre-fuse: 100 A
used
Multi-spindle CNC transfer center for automated series machining of metal components with several processing steps in one clamping. Manufacturer: MAG IAS GmbH Model: XT 525 Machine type / work sequence: ZKG EA288 13 AF240 Year of Make: 2014 Machine Type: CNC Transfer Center / Multi-Spindle Machining Center Machining Methods: Dry and Wet Machining Machining concept: Several work spindles for sequential machining without conventional tool changes Workpiece clamping: clamping device with hydraulic actuation Tool arrangement: Multiple fixed machining spindles Machine control: CNC control with control panel Hydraulic power unit: Available, with accumulators Automatic Lubrication: Available Control cabinet: Integrated Electrical energy monitoring: Siemens SENTRON PAC4200 Connection voltage: 400 V, 3 phases / PEN Frequency: 50 Hz Control and valve voltage: 24 V DC Nominal p ...
used
For sale Matec vertical machining center type 30 HV. Equipped with a Heidenhain and TNC 530 controller. This machining center also has a swivel head: 1-axis swivel head, infinitely variable, +/- 105°. Equipped with a chip conveyor with left ejection, and high pressure pump with fine filter installation. In very good condition. With machine clamps and tool holder SK-40 holder.
used
German Manufacturer: MATEC – Model: 30 HV – Year: 2005 – Heidenhain iTNC 530. Travel X/Y/Z: 3000 / 800 / 800 mm. 4-axis swivel head – PREPARATION FOR 5-AXIS MACHINING – 36-speed tool magazine – SK40 – 20–9000 rpm – 30 kW – IKZ 20 bar – 450 l tank – chip conveyor – Ethernet – central lubrication – Renishaw preparation. Condition: Tool changer overhauled. Machine in good condition and ready for demonstration under power. English Manufacturer: MATEC – Model: 30 HV – Year: 2005 – Heidenhain iTNC 530. Travels X/Y/Z: 3000 / 800 / 800 mm. 4-axis swiveling head – PREPARED FOR 5-AXIS MACHINING – 36-position tool magazine – SK40 – 20–9000 rpm – 30 kW – 20 bar through-spindle coolant – 450 L tank – Chip conveyor – Ethernet – Central lubrication – Renishaw probe preparation. Condition: Tool changer overhauled. Machine in good workin ...
used
5 Axis CNC Machining Center Manufacturer Matec Type 30 HV Year of construction 2013 Control Heidenhain iTNC530 Simultaneous Travel X/Y/Z 2000/600/700mm NC Rotary Table D=950mm Load 1200kg max. speed 18,000 rpm Tool magazine 48-fold IKZ 26bar Automatic tool measurement Tool breakage detection 3D wireless pushbutton m & h Electric Handwheel HR410 Chip conveyor Control at 33344h Program run 11291h The machine is in TOP condition, technically and geometrically very good.
used
CNC Machining Center Matec 40 HV Control: Heidenhain iTNC 530 Year of Make: 2008 Internal machine no. 70 Travels: X-axis: 3,000 mm Y-axis: 800 mm Z-axis: 1,100 mm Horizontal Z-axis: 990 mm vertical NC swivel head infinitely variable: +/- 105 degrees Tool magazine: 40-fold Tool holder: SK50 Motor spindle: 8,000 rpm / 68kW Accessories: - Chip conveyors - Partition wall prepared - Electronic handwheel - Internal coolant supply 20 bar (paper belt filter 450 l) - Full work area cladding with roof - Rinsing gun - Oil-central lubrication - Oil mist extraction system - 3D probe with radio (Renishaw RMP60)
used
Fully functional used Horizontal CNC Machining Center MAXIA Matsuura H. Plus 405 PC-12 Year of construction 2009 Fanuc Control 30i Tool magazine for 400 tools Pallet storage for 12 pallets 2 pieces of pallets 500mm x 500mm included 10 pieces of pallets additional for 3.000,- € / piece Glass scales Spindle up to 10,000 rpm, last spindle replacement July 2019 Spindle Holder SK40 DIN 69871 Big+ Spindle motor 36/24 kW Max. torque 254 Nm to 900 rpm Knoll coolant system Scraper Belt Chip Conveyor 24l/min at 70 bar, tank capacity 1300 liters Regular maintenance by the manufacturer Matsuura You can find more information in the pictures or ask us. Location of the machine: 76530 Baden-Baden The machine can be viewed on site. It is still energized and works perfectly. We would love to hear from you.
used
Mazak CV5-500 CNC 5-Axis Vertical Machining Center CNC control Mazatrol Smooth X Table size Ø 500 mm Table load 200 kg Number of pallets 1x Maximum 500x320 mm workpiece X-axis travel 730 mm Y-axis travel 450 mm Travel Z-axis 470 mm C-axis (table rotation) 360° B-axis movement ±110 (220) ° Spindle speed: 18,000 rpm Spindle holder HSK A-63 Spindle motor 15/11 kW Magazine capacity 48 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
used
Mazak FH 5800 with 10 Pallet Palletech Horizontal machining centre with Palletech CNC control Mazatrol Fusion 640M Pallet table size 500 x 500 mm Number of pallets 10x Table load 500 kg X-axis travel 710 mm Y-axis travel 610 mm Travel Z-axis 660 mm Indexing of the table 360 x 1° Spindle taper DIN 69871A Spindle speed 35 - 15,000 rpm Magazine capacity 120 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
used
Mayfran ConSep 2000 Coolant System Chip conveyor with drum filter 70 bar high pressure pump Cooling by the spindle Electronic handwheel NC rotary table with 360,000 positions Synchronized Threading Automatic on/off Preparation for Palletech CE mark Documentation
used
Mazatrol Matrix Control Travel: X-axis: 560 mm Y-axis: 640 mm Z-axis: 640 mm 2 pallets 400 x 400 mm Milling spindle with increased torque Spindle motor 30 kW Max. spindle speed 18,000 rpm NC rotary table, 360,000 positions Tool changer with 80 stations SK-40 Tool Holder Tool length measurement Preparation of the Renishaw Infrared Measuring System, OMP60 Conveyor 15 bar high pressure pump CE mark
Table size 2240x810 mm Max loading capacity 3000kg Spindle speed 6000 rpm Number of tools in magazine 60 With tool measurement unit All axes with linear scale
used
5-axis Vertical Machining Centre CNC Control Mazatrol Fusion 640 M 5x Table size 500x500 mm Table load 500 kg Number of pallets 12 (PMC) Max workpiece Ø 730x500 mm Movement X/Y/Z-axis 730-850-560 mm C-axis (table rotation) 360° A-axis (table tilt) +30/-120 Spindle speed 35-10,000 1/min Spindle Taper Big Plus BT50 Spindle motor 30/22 kW Magazine capacity 120 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.
used
Mazak VCN 530C CNC Vertical Machining Center for sale is a very well-maintained Mazak VCN 530C vertical machining center with Lehmann 500 Series 4th/5th axis from 2017. This machine impresses with its high precision, reliability and productivity and is ideally suited for single part and series production. CNC control: Mazatrol Smooth G X-axis travel: 1050 mm Y-axis travel: 530 mm Travel Z-axis: 510 mm Machine table: 1300 x 550 mm Spindle speed: 35 - 12,000 rpm Spindle: SK40 / DIN 67871A Spindle motor: 18.5/11 kW Positions in tool magazine: 30 and equipped, among other things, with - Chip conveyors - Cooling by the spindle 15 bar - Renishaw MP60 - Lehmann 4th/5th axle, type 500-Series, T1-510520. LL-TAP2-M14 with Schunk chuck - Lehmann tailstock, type: RST. LIG-80H If you have any questions about the machine, as well as an appointment for a viewing, please contact ...
used
CNC Vertical Machining Center CNC control: Mazatrol Smooth G Machine table: 1300 x 550 mm X-axis travel: 1050 mm Y-axis travel: 530 mm Travel Z-axis: 510 mm Spindle speed: 35 - 12,000 rpm Spindle: SK40 / DIN 67871A Spindle motor: 18.5/11 kW Positions in tool magazine: 30 and equipped, among other things, with - Chip conveyor, right - Cooling by the spindle 15 bar - Total spindle runtime 8,074 hours If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
used
Fully functional Used CNC Machining Center MAZAK VTC-200 C Year of manufacture 2001 The machine has a Fusion 640M control system and is equipped with a chip conveyor, partition for pendulum machining and much more. Location of the machine: 97070 Würzburg The machine can be viewed on site. It is still energized and works perfectly. We would love to hear from you.
used
For sale: Mazak vertical machining center type VTC-20C with a Mazatrol M Plus controller. X, Y and Z axis movement is 1660 x 510 x 510 mm. Table size. 2000 x 510 mm. Speed range 40 -7,000 rpm. Spindle holder ISO-40. The machining center is equipped with cooling by the spindle. Tool changer with 2 x 24 positions. The machining center is still in good condition. Still to be seen under power, intermediate sale reserved
used
48-cavity tool magazine High pressure pump 40 bar Mazak Monitoring B Renishaw RMP60 Probe Tool length measurement NC rotary table with 360,000 positions Chip conveyor, ejection left Cylinder interpolation Rapid Traverse Constant Tilt Angle Milling spindle, synchronized threading 5-axis simultaneous machining
used
The machine is in good technical condition, testing possible after prior agreement. 3 AXES, Heidenhain ITNC 530 control system.
used
CNC Vertical Machining Center MIKRON VCP 800 W With track control Heidenhain iTNC 530 Year of Make: 2002 Travel: X 800 Y 650 Z 500 Speed range: 0 – 20,000 rpm infinitely variable With the following accessories: Rigid angle table 900 mm x 600 mm clamping surface Vertical tool changer with 30 magazine positions ( HSK 63 ) Full protection cabin with sliding doors and interior lighting Electronic handwheel Tool measurement in the work area ( BLUM Laser ) 3 D Probe Infrared Renishaw Conveyor Coolant Setup 4 Height Adjustable Machine Shoes Operating instructions
used
5-axis machining center Mori Seiki NHX 5000 Year of construction 2011 (bought new in 2013) Hours10768 Processing time 7172 hours Electricity one hour 29288 With few operating hours, used only for single part to small series production, mainly for special mechanical engineering The specifications are as follows: Travels: Cylinder Ø 500 x 700 Control M730BM (Mapps2) Speed 10,0000 rpm. Tool holder SK40 DIN 69871 Tool changer 60-fold Pallet changer 2-fold Accessories: Documentation Internal cooling Knoll 50 bar Conveyor Activation to 400 tool positions Pine pallet with long zero point clamping system Lang tensioning tower approx. 100 pieces of tool holders SK40 An on-site inspection is possible at any time by appointment.
used
Manufacturer: Mori Seiki Model NLX 2500 Y/700 Top condition Year of construction 2012 only approx. 6000 operating hours incl. 12 antr. WZ Holders + 17 Static WZ Holders Quick-change system from EWS Hollow clamping device KITAGAWA BB210A821 + KITAGAWA SS1881K21 for the main spindle Coolant system with increased pressure 5 bar Hinged belt conveyor, right ejection Integrated part catcher for main spindle I/F for bar replenishment, LNS Double foot switch with protective cover Signal light (red, yellow, green) Total Counter Workpiece counters EU Tool Holder Package SAUTER BMT60 (T32259, T32260, T32261, T32262) SKM253 MSQP Transformer 45.0 kVA 15 bar Grundfos pump incl. Hydac Filter Cantilever length for driven tools 100 mm (limited Y-axis travel) (Y, SY, SMC)
used
MÜGA H250-5 built in 2018 the system ran in about 2.5 shifts, the machine has a swivel rotary table, an FMB bar feeder, a cooling lubrication filtration (IKZ) like a chip conveyor, the machine has a Fanuc control and at the moment the spindle is defective - you can also make a price proposal for the machine without spindle, it will take about 5 days until we can order and install a new spindle, from this point on the Müga will only be sold with a new spindle. so with o spindle hours
used
ÖKK HP 500S CNC Horizontal Machining Center CNC Control Fanuc 160is-MB Pallet table size 500 x 500 mm Number of pallets 2x Table load 400 kg X-axis travel: 630 mm Y-axis travel: 620 mm Travel Z-axis: 710 mm Table Indexing 0.001° Spindle Heads MAS BBT40 Spindle speed 100 - 12,000 1/min Spindle drive 11/7.5 kW Number in Stacks: 60 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock. We are selling this machine at a special price, called as seen. This means that we do not check the condition of the machine.
used
OKUMA MX55 Control: OSP700M Machine hours (spindle running time): 26,889 Accessories: various tool holder BT50; 4. Axis Partial Attachment
used
X-axis travel:760 mm Y-axis travel:640 mm Travel Z-axis:760 mm Control manufacturer:FANUC Control Model:Series 18i-MB Workpiece height (max.):800 mm Workpiece weight (max.):500 kg Spindle speed (max.):6,000 rpm Number of slots in tool magazine:120 horizontal machining center with patette changer, two pallets 500x500, 120 tool holders, touch probe Tool length:400 mm Tool weight:15 g Equipment:Chip conveyor, documentation/manual
used
The machine is in good technical condition, after prior agreement it is possible to test it. Fully functional, still in operation in very good condition. Year of commissioning 2010 - it ran in single-shift operation. Direct measurement in all five axes. Speed 15000, the spindle is in excellent condition, cooling through the spindle center, water and air. ISO40 taper, tool magazine 48, BLUM LASER tool probe brand new, Renishaw workpiece probe. New chip conveyor. HEIDENHAIN iTNC 530 system with purchased kinematics. The machine has always been serviced by an authorized service. To this day, the parameters of the new machine do not differ from the parameters of our machine. By agreement, many accessories can be sold with the machine.
used
CNC 5 Axis Machining Center Manufacturer Spinner Type U5- 620 Year of construction 2015 Control Siemens 840DE SolutionLine/Shop Mill up to 4 axes simultaneously Travel X/Y/Z 620/520/460 B-axis -90° to 110° C-axis 360° Spindle speed 12,000rpm Tool holder SK40 Tool magazine 32-fold Table size 650/545 Table load 500kg IKZ 26bar Machine hood this includes an automation system from Lang with 20 places and 5 Lang vices, machine cover, roof. The machine is in a used very good condition, it was operated in 1.5 shifts. Was always serviced according to plan, no maintenance backlog and no defect. The machine will be available from March 2027.
X,Y,Z Travels 630,530,465 mm Spindle speed 18.000 rpm Tool holder SK40 Number of tools 32 Controller Heidenhain iTNC 530 With Tool and workpiece measuring probe With chip conveyor
used
Machining Center (Vertical) CNC TYPE: SW BA25 Control: Siemens 840 C Travel X/Y/Z: 2 x 600 or 1 x 1,800 / 425 / 400mm Main spindle: SK40 / 7,500 rpm /106 Nm / 14kW / IKZ Rapid traverse: 40 m/min Tool changer: 36-speed Dimensions W/H/D: 5,100 / 3,000 / 2,900 mm Weight: 9,500 KG Equipment: Single or two-station with shuttle operation Left side with controlled 4th axle and hydraulic double clamp Right side 2x hydraulic double clamp Separate hydraulic unit for increased clamping pressures under manual clamping Can be reclamped to program-controlled voltage via central hydraulics Conveyor Coolant device with gap filter and high-pressure pump for internal coolant supply Prepared for Renishaw touch probes
used
SW BA600-2 CNC machining center with swivel table / built in 1999 / Siemens 840C control / incl. chip conveyor, coolant lubricant preparation and extraction
used
CNC machining center from Urban Control: Heidenhain Track Control iTNC 530 4-axis Travel x/y/z – axis 7200 /450 /590 mm Working range x/y/z axis 7000 / 400 /350 mm Weight 14 t Equipment: Robust basic structure as a welded frame construction Ball rail guide on all axes Milling spindle unit: 100-12000 rpm, tool holder SK 40 Drives: X-axis 50 m/min by rack and pinion drive Y/Z axis 25m/min by ball screw B-axis 9000°/min Control panel swivels Automatic central lubrication Moving tool changer for 12 tool holders SK40 Cooling emulsion plant, machine people, security fence Electronic handwheel integrated into the control panel Chip drawers, laser scanners, minimum quantity lubrication Technical data see pictures.
used
WILLEMIN W408MT CNC Machining Center TECHNICAL FEATURES: Year: 2006 NC Type: FANUC 16i-MB Number of axes: 5 X-axis travel: 250 [mm] Y-axis travel: 200 [mm] Z-axis travel: 300 [mm] X, Y and Z axis travel speed: 30000 [mm/min] Maximum diameter in bar turning spindle: 32 [mm] Maximum speed Turning spindle: 6000 [rpm] Maximum power Turning spindle: 3.7 [kW] C-axis angular travel: 360 [°] B-axis angular travel: 115 [°] Pin Attachment: HSK-E40 Minimum speed. Spindle: 500 [rpm] Maximum speed Spindle: 30000 [rpm] Spindle power: 10 [kW] Number of tool magazine stations: 48 Maximum length Tool Size: 95 [mm] Maximum diameter Tool Size: 63 [mm] Irrigation tray capacity: 80 [l] Flow rate of garden pump: 40 [l/min] Rated Current: 25 [A] Supply voltage: 400 [V] Machine weight: 1700 [Kg] More information on request.
used
YCM Supermax YCM-56 T X-560 mm Y-410 mmZ-450 mm 4 and 5 axis Control: Fanuc MXP 200i Table 700X420 mm Works flawlessly Location: CH