272 offers

Your found location: Latitude 0.0 + Longitude 0.0
Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:
lathes / CNC Turning Machines
12.11.2026
approved
dealer
item-No.: 162752933
New in: 2007

used

check
Location: Land-cz

Manufacturer: Tornos Model: Deco Sigma 8 Year: 2007 Condition: Used Stock number: 9554 Control system: FANUC Series 32i-MODEL A Operating hours: 15200 h Maximum spindle speed: 15000 1/min Max. rod diameter: 10 mm Length: 1670 mm Width: 870 mm Height: 1650 mm Weight: 1600 kg

lathes / CNC Turning Machines
04.04.2025
item-No.: 162715506
New in: 1996

used

Location: Land-de

CNC Turning and Milling Center CNC lathe used CNC universal lathe Manufacturer: Traub Type: TNA 300 Year of Make: 1996 Spindle ø 65mm Tailstock Powered tools Conveyor Control TX8H FlexIPS Collet chuck with collets from 5mm to 65mm Three-jaw chuck Various tool holders fixed, rotating and angle-rotating Etc... incl. bar loading magazine Traub DNH 61 3000, year of construction 1996 incl. many accessories! Location of the machine: Nahe 93047 Regensburg The machine can be viewed on site. It is still energized and works perfectly. We would love to hear from you.

lathes / CNC Turning Machines
16.11.2026
approved
dealer
item-No.: 162748757
New in: 2009

used

check
Location: Land-fr

TRAUB TNC 42/65 CNC Lathe TECHNICAL FEATURES: Year: 2009 NC Type: TRAUB TX8i Number of axes: 8 Y-axis travel: +/- 35 [mm] Z1 axle stroke: 450 [mm] X1 axis stroke: 140 [mm] Z2 axis stroke: 520 [mm] X2 axle stroke: 140 [mm] E-axis stroke: 450 [mm] Spindle Bore: 42 [mm] Maximum speed Spindle: 5600 [rpm] C-axis indexing accuracy: 0.001 [°] Spindle power: 18.5 [kW] Counter-spindle bore diameter: 42 [mm] Maximum speed Spindle: 5600 [RPM] C-axis sub-spindle indexing accuracy: 0.001 [°] Spindle power: 11 [kW] Toolholder type: VDI 30 Number of positions - Turret 1 : 14 Number of motorized stations - Turret 1 : 14 Maximum speed Rotating Tools - Turret 1: 4000 [RPM] Number of positions - Turret 2: 14 Number of motorized stations - Turret 2: 14 Maximum speed Rotating Tools - Turret 2: 4000 [RPM] Installed power: 107 [kVA] Rated Current: 85 [A] Supply voltage: 400 [V ...

lathes / CNC Turning Machines
10.11.2026
approved
dealer
item-No.: 162749649
New in: 1996

used

check
Location: Land-de

Year of manufacture 1996 Control: TX8 F incl. Simag 42.1 bar feeder Year of construction 2003 The bar feeder is max. approx. 3.2m for 3m bars. with a lot of accessories The machine is still under power and available at short notice

lathes / CNC Turning Machines
31.07.2026
approved
dealer
item-No.: 162749897

used

check
Location: Land-pl
Price: 3.900 €

CNC Control Traub System TX 8D C-axis/ Driven tools Bar feeder Stamag DN42 Collector of the finished parts Chip conveyor Internal liquid cooling Very good condition Max. bar diameter 42 mm Turning length 220 mm Hydraulic chuck Chuck- max. turning dia. 140 mm Max. turning diameter 140 mm Max. turning diameter over bed 390 mm Spindle boring 42 mm Number of turret heads- 3 -1st turret 12 tools -2nd turret 12 tools -3rd turret 4 tool Tool holders VDI 30 X axis travel 200 mm Z axis travel 300 mm Spindle speed 5600 rpm Max. bar length 4200 mm Max. working bars in dia. 42- 7 Total power requirement 34 kW Interlocking cover Total dimensions: 7400x1900x2400 mm Weight 4500 kg

lathes / CNC Turning Machines
14.06.2026
approved
dealer
item-No.: 162748085

used

check
Location: Land-de

TRAUB TNS 65 D / 5 - Axis CNC Lathe -For complete technical data, see data sheets -Control TX8 D -Built in 1994 -Rod passage 65 mm -Hydraulic bar loading magazine -Various driven tool holders -Tool holder -Three-jaw chuck -Complete documentation Hebkn Auovug Uls S Tel

lathes / CNC Turning Machines
12.11.2026
approved
dealer
item-No.: 162751302
New in: 2008

used

check
Location: Land-cz

Manufacturer: TRAUB Model: TNX 65/42 Year: 2008 Condition: Used Stock number: 9485 Control system: Traub TX 8i-s Maximum length of travel in the X-axis: 175 mm Maximum length of travel in the Y-axis: 40 mm Maximum feed in the Z-axis: 650 mm Number of Spindles: 2 pieces Maximum main spindle power: 24 kW Maximum spindle speed: 5000 1/min Max. rod diameter: 65 mm Lathe chuck diameter: 175 mm Length: 5500 mm Width: 2700 mm Height: 2300 mm Weight: 10000 kg The main spindle was repaired (04/2026). Equipment: Chip conveyor Oil Mist Separator Coolant tank Tool Holder Chuck Spare parts

lathes / CNC Turning Machines
12.11.2026
approved
dealer
item-No.: 162751310
New in: 2012

used

check
Location: Land-cz

Manufacturer: TRAUB Model: TNX 65-42 Year: 2012 Condition: Used Stock number: 9486 Control system: Traub TX 8i-s Number of Spindles: 2 pieces Maximum main spindle power: 24 kW Maximum spindle speed: 5000 1/min Max. rod diameter: 65 mm Lathe chuck diameter: 175 mm Length: 5500 mm Width: 2700 mm Height: 2560 mm Weight: 11500 kg The main spindle was repaired (06/2026). Equipment: Bar Feeder Chip conveyor Oil Mist Separator Coolant tank Coolant coolers Tool Holder Chuck

lathes / CNC Turning Machines
01.10.2026
item-No.: 162752036
New in: 2019

used

Location: Land-de

Lathe Turi Ric-Tc 2160 BJ 2019

lathes / CNC Turning Machines
23.06.2025
item-No.: 162703513
New in: 2006

used


turning diameter: 230 mmturning length: 520 mmcontrol: Fanuc total power requirement: kWweight of the machine ca.: 6000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

lathes / CNC Turning Machines
01.10.2026
item-No.: 162752121
New in: 1978

used

Location: Land-de

Conventional lathe Viktor BJ 1978

lathes / CNC Turning Machines
01.10.2026
item-No.: 162739745
New in: 2008

used

Location: Land-de

Used lathe from Wagner Wagner WDE 500 Lathe, cycle-controlled Only approx. 1700 operating hours Turning diameter 500 mm Turning length 1500 mm Control Siemens 802 C Circumferential diameter over bed carriage 280 mm Spindle bore diameter 82 mm Number of Controlled Axes 2 Speed range 20- 3000 rpm Rapid traverse speed 5 m/min Number of receptacles in the turret 1 Multifix "C" Tailstock Yes MK 5 Drive power 7.5 kW Machine weight approx. 3.0 t Dimensions L x W x H 3.3 x 1.7 x 1.7 m Cycle-controlled CNC lathe in good condition. Accessories: - Coolant device - Basic holder - 3- Jaw chuck - various PARAT tool holders

lathes / CNC Turning Machines
12.11.2026
approved
dealer
item-No.: 162738210
New in: 2011

used

check
Location: Land-cz

Inv. Num. : 8559 Type: WDR 1000 CNC Producer: Wagner Created: 2011 Parameters: Control system: Siemens 840D Maximum turning length: 5000 mm Maximum turning diameter over bed: 750 mm Maximum turning diameter over support: 666 mm

lathes / CNC Turning Machines
23.06.2025
item-No.: 162733207

used


turning length: ca. 750 mmturning diameter over bed: 380 mmturning diameter over slide: 150 mmcontrol: Sinumerik System 3 Operating hours: 296 hoursThe lathe is as good as new and is fully functional.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

lathes / CNC Turning Machines
03.08.2026
item-No.: 162750007
New in: 2008

used

Location: Land-de

Weiler DZ 40, Year of manufacture 2008, Control Siemens 840 D, Travel X/Z 200/350 mm, Turning diameter 180 mm, Bobmkney Ev Iujrzedf Circulation Ø max. 560 mm, Y axis +/- 25 mm, Q axle / programmable tailstock, Q axis travel 360 mm, Q axis measuring system rotative, Tailstock MK 4, Main spindle max. rod passage 42 mm, Spindle bore 52 mm, Rapid traverse X/Z/Q 30/30/20 m/min, Turret 16 speed - all stations driven, VDI 25, Shaft diameter 25 mm, Requested. Tools up to 4,500 rpm, Parts tray, accessories, Requested. Tool holders, rigid holders,

lathes / CNC Turning Machines
24.06.2026
item-No.: 162748567
New in: 2020

used

Location: Land-de

The WEILER E50HD x 2000 is a robust, cycle-controlled precision lathe for single part and small batch production. It offers a centre width of 2,000 mm, a rotation diameter over bed of 570 mm, a speed range of 1–2,500 rpm and a 20 kW main drive with high torque up to 1,300 Nm. The machine is designed for demanding turning operations and combines manual work with convenient WEILER cycle control and an easily accessible working area.

lathes / CNC Turning Machines
01.10.2026
item-No.: 162752626

used

Location: Land-de

Lathe Weiler

lathes / CNC Turning Machines
01.10.2026
item-No.: 162741132

used

Location: Land-de

Lathe Weipert

lathes / CNC Turning Machines
09.11.2026
approved
dealer
item-No.: 162739497
New in: 1983

used

check
Location: Land-de
Price: 3.800 €

Guide and tension spindle lathe Lathe Lathe Weisser Heilbronn Junior Heidenhain Control with cabin incl. oil pan Last test 05/2025 (see picture) The machine is in perfect condition and can be delivered nationwide for € 350. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your interest in advance.

lathes / CNC Turning Machines
12.11.2026
approved
dealer
item-No.: 162740134
New in: 2003

used

check
Location: Land-de
Price: 130.000 €

Zayer 30KCU700AR (2003) with Heidenhain iTNC 530. - x, y, z = 7000, 2000, 1250 - CTS 15 bar - Controlled milling head (position accuracy 0.001) - 60 tools - 37 kW spindle motor - Rapid traverse 20/10 m/min - 4500 rpm - ISO50 - Renishaw RPM60 -Conveyor - Additional milling head (replacement)

lathes / CNC Turning Machines
12.11.2026
approved
dealer
item-No.: 162752618
New in: 2001

used

check
Location: Land-cz

Manufacturer: ZPS Model No.: S60/1000 CNC Year: 2001 Condition: Used Stock number: 9546 Control system: Heidenhain Pilot 3190 Maximum turning length: 1000 mm Max. turning diameter: 275 mm Maximum length of travel in the X-axis: 275 mm Maximum feed rate in the Z-axis: 1070 mm

lathes / CNC Turning Machines
12.11.2026
approved
dealer
item-No.: 162745430
New in: 1994

used

check
Location: Land-cz

Inv. Num. : 9056 Type: SPRY 40 CNC-D Producer: ZPS Created: 1994, GO 2016 Parameters: Control system: Siemens Sinumeric 840D Maximum turning length: 300 mm Max. turning diameter: 110 mm Maximum main spindle power: 10 kW Spindle bore: 50 mm Max. rod diameter: 40 mm Weight: 2400 kg Equipment: Duplomatic tool head with rotary tools 3 meter pole holder

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE since 1996