grinding length: 600 mmgrinding width: 400 mmworkpiece height: mmtotal power requirement: 11 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic buffing machine for flat panels Table size 4800 x 1400 mm. The machine has got 4 rotating pads mounted on a rotor, speed rotor adjustable Buffing speed bridge adjustable

Wide belt sander Anthon Type: CMOWS 90 Order no. 69071879 2-belt machine with roller and shoe Grinding width 900 mm Grinding height 100 mm Sanding belt dimensions 920 mm x 1,900 mm Feed speed 11 and 22 m/min. Abrasive belt drive motor 11 kW Feed motor 1.5 kW Brush motor 0.75 kW Oscillating Shortest pieces to be sanded 400 mm Weight approx. 1,500 kg

Manufacturer: Arminius, Type: ST 2, Year: 1991, Control: Hand, Table length: 2000, Work piece hight min-max mm: 10-60, Feeding speed min-max m/min: 5-25, Controllable slewable: yes, Number of sanding units: 2, 1st sanding motor controlled and tiltable: Schleifscheiben Typ Arminius, Power kW: 1,1, 2nd sanding motor controlled and tiltable: Schleifscheiben Typ Arminius, Power kW: 1,1, Power kW: 1,1, Power kW: 1,1, Control panel at bottom: yes, Hight adjustment by hand wheel: yes, Year :1991

Manufacturer: Bauerrichter, Type: GPM 4, Year: 2013, Control: Programm, Software: Polierwalzen 4, Barcode: 3, Monting of the machine: 350, Year: yes, Number of units: yes, kW output motor: yes, Number of rotations controlled: ca.10.500, Units mounted upright: 1.300, Single table system mm: 2 X 1350 X 3200, Working table length mm: 100, Working table width mm: yes, Polierwalzen : yes, Diameter mm: yes, Disc sanding units: no, Fast exchange device: 8000, Automatical polish supply: yes, Required space L x W x H mm: Schaumstofscheiben 4/Hochdosierpistolen 3 Stück, Year :2013

Manufacturer: Bauerrischter, Type: KSK 92, Year: ca.1997, Control: hand, Monting of the machine: 1 Schleiband, Control: hand, Sanding belt hight: 60, Table length: ca.2000, Slewable sanding head: yes, Table stop mm: yes, Sanding area (beam): 60, Sanding belt width max mm: 2000 X 60, Sanding belt length max mm: 2000, Work piece hight min-max mm: 50, Feeding speed min-max m/min: 5-15, 1 Schleifmotor kW: ca.1,5, Sanding unit slewable up to 45°: 90-45, Suited for lacquer sanding: yes, Year :ca.1997

Manufacturer: Bauerrichter, Type: WRM 4 / S-E, Year: 1997, Number of units: 4, Working widht mm: 800, Through running hight max mm: 60, Diameter of brushes: 400, Number of rotations controlled: 250 - 2500 U/min, Units mounted inclined: 4, Fast exchange device: yes, Through running hight max mm: 60, Polishing width mm: 800, Engine power - kW: 4x 4 kW, Vacuum belt: yes, Exhaust diameter mm: 2 x 200, FREE TEXT: mit Oszillation, Year :1997

working width: 1100 mm; working height: 140 mm; min length of the workpiece: height adjustment: elektrisch; read out height : digital; number of grinding units: 1; 1. unit: Kombi Aggregat (Walze - Schuh) mit elektronischen Glieder-schleifschuh; electronic sanding pad: System CPS, Elementbreite 50mm; cleaning brush: Ja; number of feed speeds: 2; sanding belt dimensions: 1120mm x 1900mm; motor power sanding belt: 11kW; suction connection: 160mm, 140mm; machine length: 1800mm ; machine width: 1800mm; weight: 1500kg;

Lightweight edge sander BGU Type KS 226 for precise sanding of straight and curved wood edges. The lightweight construction and powerful motor enable a consistent sanding pattern with high removal rates. Ideal for small carpentry shops, furniture construction, and interior design., sanding belt length: 2.250 mm, Sanding belt width: 150 mm, table: swiveling, engine power: 1,5 kW, Suction nozzle: 100 mm

BINI belt sander model EXPORT S3500: – 3.5 x 0.8 m worktop – 2-speed belt 1400 – 2800 rpm – motorized table lifting – sturdy structure, weight 650 kg Year 2007, machine according to CE standards

Manufacturer: Boere , Type: BKS 900 / BBBg20/2, Year: 1985 / 1991, Monting of the machine: Walze Schuh + Walze/Schuh/Bürste, Double sided sanding line: yes, Sanding width mm: 900, Sanding hight mm: 150, Number of sanding belts: 4, Continous adjustable feeding speed m/min: 5 - 25, Rubber roller: yes, Shoe unit: yes, Shoe unit: yes, Schleifbänder unten: 2, Brushing unit: yes, Year :1985 / 1991

Wide belt grinding machine Boere Elite 1300 BK Grinding width max. 1300mm Grinding calibration roller from below

Suitable for thin materials, wood and painted surfaces. Working width: 1650mm, feed rate: 5-25m/min, sanding belt dimensions: 1650mm/2620mm, connected load: 33kW, length: 1800mm, width: 2200mm, height: 2500mm, weight: 4.5t, operating hours: approx. 200h. The machine is technically fully functional. On-site inspection is possible.

BOERE KSM 1 Edge Grinding Machine Brand: BOERE Type: KSM-1 M-No.: Year of Make: 2006 Data: Length of work tables: 900mm Width of work tables: 400mm Table level: Height adjustable Dimensions: 1,7007501,250mm Scjhleifa unit inclination: 0-60° Abrasive belt: 2580150mm Grinding spindle: ø mm Main drive: 2.2 KW Oscillatation sanding belt: 0 - 25 mm - 0.37 KW Weight: 260 KG Press: 6 bar

Grinding line with transfers Working width: 1300 Composed of: Boere Elite - 1 x calibration unit with contact roller - grinding from below Ernst LKB - Cross Grinding Unit - Longitudinal Grinding Unit OTT RSO - Calibration Roller - Grinding Shoe Sale preferably complete

Orbital grinder Brusa di Garboli LPC 300 Minimum grinding diameter 5mm Maximum grinding diameter 100mm Minimum bending radius 150mm Sanding belt dimensions 940x60mm Total power 4kw

Manufacturer: Heesemann, Type: Bürstenwalze Anderlon, Year: aus MFA 8, Widht of roller coater: 1400/150, Year :aus MFA 8

Manufacturer: Bürkle doppelseitige Struktur und Reinigungsbürste, Type: CGM 800, Year: 1984, Control: no, Monting of the machine: 2 X Anderlon 250 mm<CRLF>2 X Fibre, Number of units: 4, Engine power - kW: ca.7,5 über Getriebe Anderlonbürsten<CRLF>2 X 2,2 Kw Reinigungsbürsten, Diameter of brushes: 250 mm / 150, Number of rotations controlled: Struckturbürste, Working width mm: 950, Through running hight mm: 120, Struckturieraggregat: 2, Feeding speed continous adjustable: über Umrichter möglich, Year :1984

Manufacturer: Bürstenschleifmaschine, Type: 250 mm, Number of units: 2, Working widht mm: 250 , Diameter of brushes: 280, Units mounted upright: yes, Fast exchange device: yes, kW output motor: 1,5,

Manufacturer: Busch Schleifbürste Rotationschleifbürste, Type: Robatech 1300, Year: 2014, Control: Siemens, Software: Busch, Monting of the machine: 1 Schleifbürstenband, Number of units: 1, Working widht mm: 130, Through running hight max mm: 0-80, Number of rotations controlled: 30-140 m/min, Units mounted upright: Rotation 360 Grad, Fast exchange device: Bürstenbesätze, Through running hight max mm: 0-80, kW output motor: 5,5 Bürste/, Feeding speed continous adjustable: 4-12, Weight approx. kg: 3500, Required space L x W x H mm: 3840 X2400 X2000, Year :2014

Manufacturer: MB Busch, Type: Robatech 1300, Year: 2002, Control: Siemens, Monting of the machine: Kettenbürstenschleifsystem, Number of units: 1 Rotierend, Working widht mm: 1300, Through running hight max mm: 150, Diameter of brushes: Einschubbürsten, Fast exchange device: Bürsten, Through running hight max mm: 150, Vacuum belt: yes, Feeding speed continous adjustable: yes, Dust removal brush: yes, Weight approx. kg: ca.2000, Required space L x W x H mm: 3000 X 2000, Workpiece clamping technology: Vakuum, Year :2002

Manufacturer: Bütfering AWS, Type: AWS 1100, Year: 1981, Monting of the machine: Kombiaggregat, Sanding width mm: 1100, Sanding hight mm: 120, Sanding belt dimensions: 1900 X 1150, Längsschleifaggregate: Kombi/Bürste, Band 1 Leistung kW : ca.10, Combi unit roller/shoe: yes, Continous adjustable feeding speed m/min: yes, Transportbandantrieb kW: 0,5, Constant table hight: no, Year :1981

Working width: 1.100 mmNumber of sanding units: 2 st.Workpiece thickness max.: 150 mmsanding belt measurements: 1.110 x 1.900 mmMotor roller: 15 kWMotor pad: 11 kWFeed motor: 1,5 kWFeed speed: 3 - 15 m/min.Overall size: 1.750 x 2.210 x 2.280 mmWeight: ca. 3.300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PART NUMBER: 7506 Specifications: - max width of the workpiece 1350mm - max height of the workpiece 120mm - 3 units: -Pressure - I aggregate – grooved rubber roller for calibrating 15kW -Pressure - II unit with sequential boot 15kW - grooved rubber roller - grooved metal cylinder - rubber slip roller - III unit with sequential boot 11kW - 2 metal rollers - possibility of smooth change of feed speed - rubber roller, slip - IV aggregate - 2 cleaning rollers - rubber, slip, outfeed roller - blowing the belt - Pulling strap - pneumatic oscillation of tapes on photocells - electric lifting of the table top - smooth feed speed control 2.2kW - working pressure 6-10 bar - extraction spigot diameter 200mm, 4x210mm - total dimensions length/width/height 3200x2250x2450mm - weight about 4500kg, grinder adapted to vacuum pump Net price: 32900 PLN Net pri ...

Combination grinding unit with contact roller and air grinding shoe Brush roller Abrasive belt tension, pneumatic motor strength adjustment Specifications: max. working width 1100 mm Max. workpiece thickness 150 mm Min. workpiece thickness 3 mm Sanding belt dimensions 1900 x 1120 mm Feed speed 5/10 m/min. Motor power grinding unit 15 kW Motor power height adjustment 0.50 kW Motor power feed carpet 0.5/1.0kW Operating pressure 6 bar Air pressure approx. 20 l/min Suction nozzle 2 x 200 mm Weight approx. 2100 kg Machine width approx. 1750 mm Cntaou7R Machine depth approx. 1700 mm Machine height approx. 1900 mm

gebr. Wide belt sander (1-belt) BÜTFERING CLASSIC 113 C YOC 2001 only 816 h (read operating hours) Total connected load: 17 kW 1 power unit Drive motor: 15 kW Working width: 1,350 mm Sanding belt dimensions: 1,370 x 1,900 mm Workpiece thickness: 3 - 150 mm Electronic control (50 programs) Feed: 2.5 - 13 m/min. (infinitely adjustable) Combined contact roller-grinding shoe unit with abrasive belt grain compensation Steel contact roller (profiled) Electronically controlled link pressure beam (element width: 50 mm) Dust Removal Brush Roller table (infeed + outlet) Engine brake Extraction connection: 200 + 140 mm incl. thickness gauge (0-50 mm) Weight: approx. 2,000 kg Very good gebr. Condition! Few operating hours!

Bütfering Optimat SBO 109K Wide-belt calibration fine grinding machine Combination unit with contact roller and sanding pad Contact roller height-adjustable with grain compensation Working width 950 mm Control panel with LED thickness indicator Thickness adjustment and feed speed adjustable via multifunction lever on the control panel Motor power approx. 11 kW 2 feed speeds 4 /8 m / min. Machine is WORKSHOP overhauled in TOP CONDITION From stock Lieboch

SPECIFICATIONS: Machining width: 1340 mm Processing height: 150 mm Steel calibration roller: Ø 200 mm Sanding belt length: 2100 x 1400 mm Installed power: 17 kW

Manufacturer: Bütfering, Type: Profiline SCR/RRR, Year: 2007, Sanding width mm: 1350, Sanding hight mm: 3-160, Number of sanding belts: 3, Sanding belt dimensions: 13702620, Rollers: 3, Rubber roller: 1, Steel roller: 2, Shore roller 1: 70 , Bürstenaggregate: 1, Band 1 Leistung kW : 37, Band 2 Leistung kW : 30 , Band 3 Leistung kW : 22, Continous adjustable feeding speed m/min: 4-20, Transportbandantrieb kW: 7, Constant table hight: yes, Vacuum table: yes, Weight in kg: ca. 2020, Year :2007

SPECIFICATIONS: Machining width: 1350 mm Sanding belt width: 1370 mm Sanding belt length: 1900 mm Steel roller: Ø 150 mm Processing thickness: max. 150 mm Total installed power: 10 hp Variable speed drive: 0.75 hp Predisposition to depressor or aspirator COMPOSITION: 01 Calibration Roller + Buffer Roller Unit 01 Scotch brite aggregate

Wide-belt sanding machine Bütfering Type VEGA 113 E Year of manufacture 1996 Working width 1350 mm Sanding belt width 1370 mm Workpiece thickness maximum 160 mm 1 grinding unit Combination unit with contact roller and segment sanding shoe With abrasive belt, grain size compensation and calibration device Automatic contact roller 85° Shore Electronically controlled link pressure beam Patented system CPS (see below) element width 50 mm Infinitely adjustable pressure on the workpiece edges 3-way pole-switchable drive motor 7.5/10/15 kW Sanding belt speeds 4.5/9/18 m/s Belt blow-off device Pneumatic abrasive belt tensioning device Feed speed 2.5-13 m/min Roller table at the infeed Roller table at the outlet Motorized height adjustment with digital display Cleaning brush 3 kW Total connected load approx. 20 kW CPS: (C)ompact-(P)ressure-(S)ystem Self-contained, m ...

Manufacturer: Bütfering, Type: Vega 213 CE, Year: ca.1995, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 2, Sanding belt dimensions: ca.2120 X 1350, Table hight adjustment by engine: yes, Rollers: 1, Rubber roller: yes, Band 1 Leistung kW : 12 gleich und gegenlauf, Band 2 Kombiaggregat Walze/Schuh: 15, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: 6-20, Feeding engine kw: 1,2, Intermediate sanding of lacquer: no, Vacuum table: yes, Segment sanding shoe: yes, Bürstaggregat : yes, Durchmesser/ Bürstenbesatz: 125, Year :ca.1995

Cappeci LV1700 Vertical Sander Motor power 0.8/0.6kw Two grinding speeds Sanding belt width: 40mm Grinding height: 260mm Distance to machine body: 330mm

Wide belt grinding machine Carstens Grinding width 1100 mm Grinding height approx. 120 mm Vacuum transport carpet in good condition Combination unit: 1 sanding belt runs over the hard rubber roller and shoe Cleaning brush in the spout Heavy, solid grinding machine with manageable technology. Good, ready-to-use condition Weight approx. 2000 kg

Carstens bench grinder for grinding and polishing wood and other materials with two spindles. · Dimensions LxWxH approx.: 1,750 x 700 x 1,100 mm · Further technical data on request, engine: 2,2 kW, Spindle length per side: 175 mm, · Spindle diameter max.: 35 mm, spindle diameter: 35 mm

Tape width 230mm two feed speeds motor power 5.5kW pneumatic pressure of the pulling roller grinding shaft diameter 310mm

Manufacturer: Costa Lackschleifmaschine, Type: C 1350, Year: 1999, Control: Costa, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 1, Sanding belt dimensions: 2620 X 1350, Rubber roller: yes, Shore roller 1: 40, Band 1 Leistung kW : 36, Band 1 Schleifbandgeschwindigkeit m/s : ca.5-20, Intermediate sanding of lacquer: yes, Constant table hight: yes, Vacuum table: yes, Noise enclosure: yes, Workpiece emitting device nozzles: yes, Year :1999

Manufacturer: Costa Breitbandschleifmaschine, Type: CCT/1350, Year: 1995, Monting of the machine: Stahlwalze/Gummiwalze/Schuh, Sanding width mm: 1350, Sanding hight mm: 150, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Steel roller: yes, Band 1 Leistung kW : ca.30, Band 2 Leistung kW : ca.30, Band 3 Leistung kW : 17, Continous adjustable feeding speed m/min: 10-25, Transportbandantrieb kW: ca.3, Constant table hight: yes, Vacuum table: yes, Brushing unit: yes, Weight in kg: ca.8000, Year :1995

Manufacturer: Costa, Type: KA CCC 1350, Year: 2003, Control: Costa, Sanding width mm: 1350, Sanding hight mm: 160, Number of sanding belts: 3, Sanding belt dimensions: 1350 X 2620, Rollers: 3, Längsschleifaggregate: 3, Bürstenaggregate: 1, Steel roller: 2+1 Gummi, Bürstenaggregate: 1, Band 1 Leistung kW : ca.20, Band 2 Leistung kW : ca.20, Band 3 Leistung kW : ca.20, Continous adjustable feeding speed m/min: 5-15, Transportbandantrieb kW: 2,2, Constant table hight: yes, Brushing unit: yes, Year :2003

This Costa M36 CC1150 belt sander was manufactured in 2008. Ideal for smoothing and finishing surfaces, it offers reliable performance for your sanding needs. Contact us for more information.

SPECIFICATIONS: Processing width: max. 1400 mm 2 adjustable speeds Motor 1: 30 kW Motor 2: 22 kW COMPOSITION: Group I: Steel roller Ø 400 mm Group II: 2 steel rollers of Ø 130 mm each

Manufacturer: Costa, Type: SbF , Year: 1999, Sanding width mm: 1350, Sanding hight mm: 3-150, Number of sanding belts: 1, Rubber roller: yes, Band 1 Leistung kW : 15, Transportbandantrieb kW: 1,1, Brushing unit: yes, Year :1999

Manufacturer: Costa, Type: T 1350, Year: 1998, Monting of the machine: schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 150, Number of sanding belts: 1, Sanding belt dimensions: 3250 X 1350, Längsschleifaggregate: ca.17, Bürstenaggregate: yes, Band 2 Kombiaggregat Walze/Schuh: 10-20, Belt 4 pressure segment belt: yes, Belt 4 synchronous and reverse run: 32, Elektronische Tastung mm: yes, Table hight adjustment by engine: ca.1,5, Transportbandantrieb kW: yes, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: yes, Year :1998

Satin sander COSTA LEVIGATRICI model S A2 TS 1350 : – with electronic PCM control and touch-screen video – useful working width 1350mm – useful working thickness from 3 to 160mm – variable feed speed from 5 to 25 m/min – with perforated belt and depressor – n° 1 belt unit with pad, 2620mm belt development, with air blowers belt cleaning – n° 1 scotch-brite group (inside the machine) Year 2000, CE regulations

CALIBRATING SANDING machine with 2 belts (2 independent motors) model COSTA series SK 5 CC 1350 second-hand machine working conditions Excellent , machine as new machine with inverter on the belts and on the carpet fixed table, moving head machine with CE regulation: YES instruction booklet, CE declaration of conformity: YES for wood, furniture, custom-made furniture, wooden frames, doors, panels, composite materials, plastics and various technical data : max. working width mm. 1350 max working height mm. 160 min working height mm. 4 dimensions of abrasive belts mm.1380 x 2620 advancement speed belt , with inverter , from 3 to 15 m/min (motor power Kw 1.1) automatic centering perforated carpet (there is no vacuum group) composition (2 belts, 2 independent motors) : 1st unit : rubber calibrating roller - diameter mm 200 - shore 85 - motor power Hp 10. with inverter  ...

Code: 0118 Brand: DE STEFANI Model: MV Automatic polishing machine for edges for polishing polyester, polyurethane and other paints Features: Track drive system with rubberized skids Manual upper presser with rubberized wheels Adjustable support bar for wide pieces Composition: 1° Group - N° 2 adjustable brushes - Motor Hp 4 2° Group - N° 1 Brush - Motor Hp 2 Working surface height mm 870 Feed speed 5 to 25 mt/min Working length min mm 150 Working height min/max mm 10/100 Working width min 50 Protection cabin Electrical cabinet Overall dimensions mm 2700 x 1000 x 1250 h Weight kg 1500

De Stefani MVT edge sander 1 sanding unit Maximum element height 100mm Sanding unit motor 2.5kw Self-shooting sanding unit Manual adjustment of the sanding unit Manual adjustment of the angle of the unit Oscillating sander unit Feed speed adjustable via variator 0.74kw feed motor

Blowing the sanding belt manual pressure height adjustment maximum element height 120mm Manual adjustment of the sanding belt angle from 0° to 90° manual adjustment of the sanding unit up-down manual adjustment of the distance between the sanding unit and the front-to-rear feed manual feed speed control 2 grinding speeds manual adjustment of the boot pressure

Manufacturer: Delle Vedove, Type: Profilleistenschleifmaschine, Monting of the machine: 8 Schleifaggregate, Program: yes, Axis control: yes, Work piece width min-max mm: 10-250, Min.-max. workpiece height in mm: 6-80, Work piece length min-max mm: 300, Sanding width mm: 2500, Sanding hight mm: 80, Schleifaggregate links : 3, Schleifaggregate rechts : 3, Transverse sanding units: no, Surface sanding units: 2, Profile sanding units: 6, Monting of the machine: 8 Schleifaggregate,

Code: 0424 Brand: DMC - ITALY Model: EUROPA 120 Automatic 2-belt calibrating sanding machine for wood, furniture, furnishings, wooden frames, doors, panels, composite materials and various Technical data: Sturdy construction Max working width mm 1200 Max working height mm 170 Abrasive belt size mm 2200 x 1250 1° Group Rubber Calibrating Roller - Diameter mm 220 - Adjustable workpiece holding pressure brackets - Motor Hp 20 2° Group Finishing Pad with adjustable pressure - Motor Hp 10 Abrasive belt cleaning blowers Belt feed speed variator from 3,5 to 17,5 mt/min Vacuum table - Motor Hp 7,5 Automatic table lifting Automatic table positioning N° 2 suction inlets diameter mm 200 Working pressure 7 bar Overall dimensions mm 1900 x 1800 x 2100 h Weight kg 2500