other wood working machines used for sale

Pinomatic cross conveyor for a planing and sawing line Year of construction 2001 Manufacturer Pinomtatic OY Type POS 9+10 S/N P1033 motorised cross conveyor with 7 chain hoists length of the arms: : 6000mm Width of the cross conveyor up to 4000mm ( variable adjustable ) Height: 900mm 6 chain hoists fixed mounted 1 chain hoist can be variably adjusted Voltage 230/ 400VAC

Remote Mayrhofer SPW-F quick-release car

Wood chipping machine Low-noise low-speed machine with press drawer WL12/30 Hopper dimensions 1200x1200 Diameter of shaft 368mm 58 cutting blades in two rows 15/20mm Strainer Main motor 30kW Weight approx. 3200kg

Rudnick&Enners Drum Chipper Type: RE-TH 250/650/5 Main motor: 75 kW Inlet width: 700 mm Inlet height 300 mm Feed rollers: 3 bottom, 2 top with control cabinet and metal detector

Round timber yard Springer (noisy. Layout) Consisting of log feed 4 strands Separation Depositor Bruks Reducer Crane Blochzug Surveying 3D Speaker Metal detector Mesutronic Debarking Nicholson A5 /27 inch AIRSEAL ! (Rotor new!) Cross conveyors 2 cross-cut saws 66 sorting boxes each 2 sorting lines of 33 boxes each

Top-equipped automatic trimmer in very good condition, with loading on both sides! 3 Movable flanges and new controls! 2 x board separator The fed boards are separated with 2 S-shaped chain cross conveyors. Hydraulically actuated ejectors eject when the Take the leading board back. A fast-running cross conveyor takes over the board after separation and feeds it to the assessment and manipulation station. Double-sided feeding, control NEW! (OPTILINE) The BKO trimming circular saw has two overhead width-adjustable saw shafts, each with a blade flange. on the saw shafts (BKO 3). With one separating flange per side and adjustment via telescopic shafts. The width adjustment is servo-hydraulic.

KRÜSI chalet construction machine / log cabin production system type CM 40 Manufacturer: Krüsi Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of construction: 1996 S/N 431 Condition: good, technically checked and cleaned / ready for use Machine description / equipped with: 1. Sawing unit: Hand feed Spindle adjustment with analogue dimension display 2. CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display 3. Drilling unit: Hand feed Spindle adjustment with analogue dimension display 4. End milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Specifications Workpiece Cutting height max. 200nn Cutting width max. 250mm Working table height 900mm Sawing unit Saw blade Ø max. / bore ø 400 / 30 mmm Tungsten carbide equipped with chip depth limiter (synchronization)  ...

KRÜSI chalet construction machine / log cabin production system type CM 40 POS 1: Motor-driven roller conveyor Working width 400mm, infinitely variable feed speed 2.0 kw motor, length 6000mm POS 2: Ripsaw Diameter saw blade 400mm Pneumatic feed of the sawing depth Main motor 4.0 kW POS 3: KRÜSI chalet construction machine / log cabin production machine type CM 40, year of construction approx. 1985 Horizontal milling unit Cutter - Ø 180mm Cutter width max.130mm from cutter width 60 mm only cutters made of aluminum alloy with 1 motor with manual feed, kW 2.2 POS 4: Drilling unit: Hydropneumatic feed Clamping Ø max. mm 16 Drill bit- Ø max. mm 32 Motor min'1 1450, kW 1,8 POS 5: KKRÜSI RÜSI chalet building machine / log cabin production machine type CM 40 Machine No.431 Year of construction: 1996 Sawing unit: Hand feed Spindle adjustment wit ...

Valonkone Debarking Machine VK450 Year of construction: 1987 ( current photos coming soon - only sample photo ! ) Debarking diameter (mm) 80 - 480 Min. trunk length (m) 2,2 Weight (kg) 13.500 Motor: Rotor (kW) 55 Engine: Feed unit (kW) 3x11 Refurbished / workshop tested Valonkone debarking machine: The renovation process essentially includes: - Mending the sheets, replacing recesses - Check rotor bearings, check knife axes and partially repair them. - Order bearings and wear parts (cardan shafts). - Repairing tables and attaching new plates to the edge strips, in some cases new conveyor chains. - New straps - Check and repair geared motors. - New control cabinet - Partial sandblasting or rust removal and re-priming The VK450 debarker was the first of the new generation of VK debarkers, followed by the VK600 and VK800 models. It quickly became the most sought-af ...

Secondary shredder with feed hopper with screw discharge Rotor 1000 mm diameter x 700 mm wide 10 rotor blades, 2 stator knives Motor 110 kW (other motor size available on request)

Hacker TH 250/650 with metal detector, sieve..

Inlet opening: approx. 1000 x 1700 mm Rotor width: approx. 700 mm Rotor diameter: approx. 1000 mm Stator knives: 2 Rotor blades: 10 Drive: 110 kW

Inlet opening: approx. 500 x 700 mm Rotor width: approx. 700 mm Rotor diameter: approx. 1000 mm Stator knives: 2 Rotor blades: 10 Drive: 110 kW

Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h

Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h

Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h

Remote-controlled gate loading system H38 For the block-initiating gate incision at high feeds. The gate guide sits in a stationary operating stand with a good overview of the entire cutting system. The machine is in very good condition and can be delivered with new control on request!

Rind mill

Conveyor for peace\'s length 6 m+ 3 m high

Komplette Hackanlage LINDNER 150/400 37kW mit Vibrorinne ca. 17 m, Siebzone ca. 5m, Bogenfoerderer ca. 6 m Hoehe, Laengskratzer in 3 Bunker ca.12m, Trommelsieb; ready for work